clients using UTF-8, which should be the default today.
References:
- - <http://ngircd.barton.de/doc/Protocol.txt>
- - doc/Protocol.txt
+ - IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
+ - IRC+, doc/Protocol.txt
- NICK
- NICK <nick>
+ NICK <nickname>
+ NICK <nickname> [<hops>]
+ NICK <nickname> <hops> <username> <host> <servertoken> <usermodes> <realname>
.
- Change your nickname to <nick>.
+ Set or change the <nickname> of a client (first form) and register
+ remote clients (second and third form; servers only).
+
+ References:
+ - RFC 1459, 4.1.2 "Nick message" (old client and server protocol)
+ - RFC 2812, 3.1.2 "Nick message" (client protocol)
+ - RFC 2813, 4.1.3 "Nick" (server protocol)
- PASS
+ PASS <password>
PASS <password> <version> <flags> [<options>]
.
- Set a connection <password>. This command must be sent before the
- NICK/USER registration combination.
+ Set a connection <password>. This command must be the first command
+ sent to the server, even before the NICK/USER or SERVER commands.
.
- See doc/Protocol.txt for more info.
+ The first form is used by user sessions or (old) RFC 1459 servers,
+ the second form is used by RFC 2812 or IRC+ compliant servers and
+ enables the server to indicate its version and supported protocol
+ features.
+
+ References:
+ - RFC 1459, 4.1.1 "Password message" (old client and server protocol)
+ - RFC 2812, 3.1.1 "Password message" (client protocol)
+ - RFC 2813, 4.1.1 "Password message" (server protocol)
+ - IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
+ - IRC+, doc/Protocol.txt
- PING
- PING <server1> [<server2>]
+ PING <token> [<target>]
+ .
+ Tests the presence of a connection to a client or server.
+ .
+ If no <target> has been given, the local server is used. User clients
+ can only use other servers as <target>, no user clients.
.
- Tests the presence of a connection. A PING message results in a PONG
- reply. If <server2> is specified, the message gets passed on to it.
+ A PING message results in a PONG reply containing the <token>, which
+ can be arbitrary text.
+
+ Please note:
+ The RFCs state that the <token> parameter is used to specify the
+ origin of the PING command when forwarded in the network, but this
+ is not the case: the sender is specified using the prefix as usual,
+ and the parameter is used to identify the PONG reply in practice.
+
+ References:
+ - RFC 2812, 3.7.2 "Ping message"
- PONG
- PONG <server1> [<server2>]
+ PONG <target> [<token>]
.
- This command is a reply to the PING command and works in much the
- same way.
+ Reply to a "PING" command, indicate that the connection is alive.
+ .
+ The <token> is the arbitrary text received in the "PING" command and
+ can be used to identify the correct PONG sent as answer.
+ .
+ When the "PONG" command is received from a user session, the <target>
+ parameter is ignored; otherwise the PONG is forwarded to this client.
+
+ References:
+ - RFC 2812, 3.7.3 "Pong message"
- QUIT
QUIT [<quit-message>]
.
- End IRC session and disconnect from the server.
+ Terminate a user session.
+ .
+ When received from a user, the server acknowledges this by sending
+ an "ERROR" message back to the client and terminates the connection.
.
- If a <quit-message> has been given, it is displayed to all the
- channels that you are a member of when leaving.
+ When a <quit-message> has been given, it is sent to all the channels
+ that the client is a member of when leaving.
+
+ References:
+ - RFC 2812, 3.1.7 "Quit"
+ - RFC 2813, 4.1.5 "Quit"
- USER
- USER <user> <modes> <realname>
+ USER <username> <hostname> <unused> <realname>
+ .
+ Register (and authenticate) a new user session with a short <username>
+ and a human-readable <realname>.
.
- This command is used at the beginning of a connection to specify the
- <user>name, hostname, <realname> and initial user <modes> of the
- connecting client.
+ The parameter <hostname> is only used when received by an other server
+ and ignored otherwise; and the parameter <unused> is always ignored.
+ But both parameters are required on each invocation by the protocol
+ and can be set to arbitrary characters/text when not used.
.
- <realname> may contain spaces, and thus must be prefixed with a colon.
+ If <username> contains an "@" character, the full <username> is used
+ for authentication, but only the first part up to this character is
+ set as "user name" for this session.
+
+ References:
+ - RFC 2812, 3.1.3 "User message"
- WEBIRC
- See doc/Protocol.txt
+ WEBIRC <password> <username> <hostname> <ip-address>
+ .
+ Allow Web-to-IRC gateway software (for example) to set the correct
+ user name and host name of users instead of their own.
+ .
+ It must be the very first command sent to the server, even before
+ USER and NICK commands!
+ .
+ The <password> must be set in the server configuration file to prevent
+ unauthorized clients to fake their identity; it is an arbitrary string.
+
+ References:
+ - IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
+ - IRC+, doc/Protocol.txt
General Commands
.
If <message> is omitted, the away status is removed.
+ References:
+ - RFC 2812, 4.1 "Away"
+
- HELP
HELP [<command>]
.
ngIRCd replies using "NOTICE" commands like ircd 2.10/2.11; other
implementations are using numerics 704, 705, and 706.
-
- MODE
- MODE <nickname> <flags> (user)
- MODE <channel> <flags> [<args>]
+ MODE <nickname> [{+|-}<mode>[<mode>] [{+|-}<mode>[<mode>] [...]]]
+ MODE <channel> [{+|-}<mode>[<mode>] [<arg> [<arg> [...]]] [{+|-}<mode>[<mode>] [<arg> [<arg> [...]]] [...]]]
+ .
+ Set and get user and channel modes.
+ .
+ When no mode parameters are given, the currently set user or channel
+ modes are returned. Otherwise the modes are adjusted accordingly
+ and the changes will be reported back to the client.
.
- The MODE command is dual-purpose. It can be used to set both (user) and
- <channel> modes.
+ All user and channel "modes" are indicated by single case-sensitive
+ characters.
.
- See doc/Modes.txt for more information.
+ Please note that a user can only get and set his own modes, and not
+ all user "levels" are allowed to change all channel modes ...
+ .
+ The mode parameters can become quite complex, especially when dealing
+ with channel modes that require additional arguments:
+ .
+ {+|-}<mode(s}> -- set or unset one or more modes.
+ +<mode(s)> -<mode(s)> -- set some modes and unset others.
+ +<modes> <arg1> <arg2> -- set (at least) two modes with arguments.
+ .
+ Some examples:
+ .
+ MODE nick +i -- set user to "invisible".
+ MODE #chan +tn -- set "topic lock" and "no external messages".
+ MODE #chan -t +l 50 -- remove "topic lock", set "user limit" to 50.
+ MODE #chan +ov nick1 nick2 -- set "channel op" and "voice" mode
+ to nick1 and nick2 in channel #chan.
+ .
+ A complete list of all modes supported by ngIRCd can be found online
+ here: <http://ngircd.barton.de/doc/Modes.txt>.
+
+ References:
+ - RFC 2811, 4. "Channel Modes"
+ - RFC 2812, 3.1.5 "User mode message"
+ - RFC 2812, 3.2.3 "Channel mode message"
+ - <http://ngircd.barton.de/doc/Modes.txt>
+ - doc/Modes.txt
- NOTICE
- NOTICE <target> <notice>
+ NOTICE <target>[,<target>[,...]] <message>
.
- Send <notice> to <target> (nick or channel).
+ Send a <message> to a given <target>, which can be a user or a
+ channel, but DON'T report any error.
.
- This command works similarly to PRIVMSG, except automatic replies must
- never be sent in reply to NOTICE messages.
+ The "NOTICE" command exactly behaves like the "PRIVMSG" command, but
+ doesn't report any errors it encounters (like an unknown <target>).
+ Please see the help text of the "PRIVMSG" command for a detailed
+ description of the parameters!
+
+ References:
+ - RFC 2812, 2.3.1 "Message format in Augmented BNF"
+ - RFC 2812, 3.3 "Sending messages"
+ - RFC 2812, 3.3.2 "Notice"
- PRIVMSG
- PRIVMSG <target> <message>
+ PRIVMSG <target>[,<target>[,...]] <message>
+ .
+ Send a <message> to a given <target>, which can be a user or a
+ channel, and report all errors.
+ .
+ The <target> must follow one of these syntax variants:
+ .
+ - <nickname>
+ - <channel>
+ - <user>[%<host>]@<server>
+ - <user>%<host>
+ - <nickname>!<user>@<host>
.
- Send <message> to <target> (nick or channel).
+ If the <target> is a user, a private message is sent directly to this
+ user; if it resolves to a channel name, a public message is sent
+ to all the members of that channel.
.
- Common IRC clients use MSG as PRIVMSG alias.
- (Some clients use "QUERY <nick> [<message>]" to open a private chat.)
+ In addition, IRC Ops can use these two forms to specify the <target>:
+ .
+ - #<hostmask>
+ - #<servermask>
+ .
+ The <mask> can contain the wildcard characters "*" and "?", but must
+ contain at least one dot (".") and no wildcard after the last one.
+ Then, the <message> is sent to all users matching this <mask>.
+ .
+ All warnings and errors are reported back to the initiator using
+ numeric status codes, which is the only difference to the "NOTICE"
+ command, which doesn't report back any errors or warnings at all.
+ .
+ Please note that clients often use "MSG" as an alias to PRIVMSG, and
+ a command "QUERY <nick> [<message>]" to initiate private chats. Both
+ are command extensions of the client and never sent to the server.
+ References:
+ - RFC 2812, 2.3.1 "Message format in Augmented BNF"
+ - RFC 2812, 3.3 "Sending messages"
+ - RFC 2812, 3.3.1 "Private messages"
Status and Informational Commands
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.
<target> can be a server name, the nickname of a client connected to
a specific server, or a mask matching a server name in the network.
- The server of the current connecion is used when <target> is omitted.
+ The server of the current connection is used when <target> is omitted.
References:
- RFC 2812, 3.4.9 "Admin command"
.
<target> can be a server name, the nickname of a client connected to
a specific server, or a mask matching a server name in the network.
- The server of the current connecion is used when <target> is omitted.
+ The server of the current connection is used when <target> is omitted.
References:
- RFC 2812, 3.4.10 "Info command"
ISON <nickname> [<nickname> [...]]
.
Query online status of a list of nicknames. The server replies with
- a list only containing nicknes actually connected to a server in
+ a list only containing nicknames actually connected to a server in
the network. If no nicknames of the given list are online, an empty
list is returned to the client requesting the information.
.
<target> can be a server name, the nickname of a client connected to
a specific server, or a mask matching a server name in the network.
- The server of the current connecion is used when <target> is omitted.
+ The server of the current connection is used when <target> is omitted.
Please note that ngIRCd ignores the <mask> parameter entirely: it
is not possible to get information for a part of the network only.
.
<target> can be a server name, the nickname of a client connected to
a specific server, or a mask matching a server name in the network.
- The server of the current connecion is used when <target> is omitted.
+ The server of the current connection is used when <target> is omitted.
References:
- RFC 2812, 3.4.1 "Motd message"
- NAMES
- NAMES [<channels> [<server>]]
+ NAMES [<channel>[,<channel>[,...]] [<target>]]
.
- Returns a list of who is on the comma-separated list of <channels>,
- by channel name.
+ Show the list of users that are members of a particular <channel>
+ (and that are visible for the client requesting this information) as
+ seen by the server <target>. More than one <channel> can be given
+ separated by "," (but not whitespaces!).
.
- If <channels> is omitted, all users are shown, grouped by channel name
- with all users who are not on a channel being shown as part of channel
- "*".
- If <server> is specified, the command is sent to <server> for
- evaluation.
+ If <channel> has been omitted, all visible users are shown, grouped
+ by channel name, and all visible users not being members of at least
+ one channel are shown as members of the pseudo channel "*".
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connection is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.2.5 "Names message"
- STATS
- STATS <flag> [<server>]
+ STATS [<query> [<target>]]
.
- Returns statistics about the current server, or of a specified <server>.
+ Show statistics and other information of type <query> of a particular
+ IRC server in the network.
.
- STATS flags:
+ The following <query> types are supported (case-insensitive where
+ applicable):
.
- g = G-Lines (Network-wide bans)
- k = K-Lines (Server-local bans)
- l = Link status (Parent server and own link)
- m = IRC command status (usage count)
- u = Server uptime
+ - g Network-wide bans ("G-Lines").
+ - k Server-local bans ("K-Lines").
+ - L Link status (servers and user links).
+ - l Link status (servers and own link).
+ - m Command usage count.
+ - u Server uptime.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connection is used when <target> is omitted.
+ .
+ To use "STATS L" the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 3.4.4 "Stats message"
- TIME
- TIME [<server>]
+ TIME [<target>]
.
- Show the local time of the current server, or of a specified <server>.
+ Show the local time of an IRC server in the network.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connection is used when <target> is omitted.
+
+ References
+ - RFC 2812, 3.4.6 "Time message"
- TRACE
- TRACE [<server>]
+ TRACE [<target>]
+ .
+ Find the route to a specific server and send information about its
+ peers. Each server that processes this command reports back to the
+ sender about it: the replies from pass-through servers form a chain
+ which shows the route to the destination.
.
- Trace a path across the IRC network of the current server, or if given
- of a specific <server>, in a similar method to traceroute.
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connection is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.4.8 "Trace message"
- USERHOST
- USERHOST <nicknames>
+ USERHOST <nickname> [<nickname> [...]]
.
- Show the user-host of <nicknames> (seperated by space).
- "-" means <nick> is away,
- "+" means <nick> is available,
- "*" indicates your connection.
+ Show flags and the hostmasks (<user>@<host>) of the <nickname>s,
+ separated by spaces. The following flags are used:
+ .
+ - "-" The client is "away" (the mode "+a" is set on this client).
+ - "+" Client seems to be available, at least it isn't marked "away".
+ - "*" The client is an IRC operator (the mode "+o" is set).
+
+ References:
+ - RFC 2812, 4.8 "Userhost message"
- VERSION
- VERSION [<server>]
+ VERSION [<target>]
+ .
+ Show version information about a particular IRC server in the network.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connection is used when <target> is omitted.
.
- Show the ngIRCd version of the current server, or specified <server>.
+ Please note: in normal operation, the version number ends in a dot
+ (".", for example "ngIRCd-20.1."). If it ends in ".1" (for example
+ "ngIRCd-20.1.1", same version than before!), the server is running in
+ debug-mode; and if it ends in ".2", the "network sniffer" is active!
+ Keep your privacy in mind ...
+
+ References:
+ - RFC 2812, 3.4.3 "Version message"
- WHO
- WHO [<target> ["o"]]
+ WHO [<mask> ["o"]]
.
- Returns a list of users who match <target> (nick, hostmask or channel).
+ Show a list of users who match the <mask>, or all visible users when
+ the <mask> has been omitted. (Special case: the <mask> "0" is
+ equivalent to "*")
.
If the flag "o" is given, the server will only return information about
IRC Operators.
+ References:
+ - RFC 2812, 3.6.1 "Who query"
+
- WHOIS
- WHOIS [<server>] <nicknames>
+ WHOIS [<target>] <mask>[,<mask>[,...]]
.
- Returns information about the comma-separated list of <nicknames>.
+ Query information about users matching the <mask> parameter(s) as seen
+ by the server <target>; up to 3 <masks> are supported.
.
- If <server> is given, the command is forwarded to it for processing.
+ <target> can be a server name, the nickname of a client connected to a
+ specific server, or a mask matching a server name in the network. The
+ server of the current connection is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.6.2 "Whois query"
- WHOWAS
- WHOWAS <nickname> [<count> [<server>]]
+ WHOWAS <nickname>[,<nickname>[,...]] [<count> [<target>]]
.
- Used to return information about <nicknames> that are no longer in use
- (due to client disconnection, or nickname changes).
+ Query information about nicknames no longer in use in the network,
+ either because of nickname changes or disconnects. The history is
+ searched backwards, returning the most recent entry first. If there
+ are multiple entries, up to <count> entries will be shown (or all of
+ them, if no <count> has been given).
.
- If given, the server will return information from the last <count> times
- the nickname has been used.
- If <server> is given, the command is forwarded to it for processing.
+ <target> can be a server name, the nickname of a client connected to a
+ specific server, or a mask matching a server name in the network. The
+ server of the current connection is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.6.3 "Whowas"
Channel Commands
~~~~~~~~~~~~~~~~
- INVITE
- INVITE <nick> <channel>
+ INVITE <nickname> <channel>
.
- Invites <nick> to <channel>.
- <channel> does not have to exist, but if it does, only members of the
- channel are allowed to invite other clients.
+ Invite <nickname> to join channel <channel>.
.
- If the <channel> mode "+i" is set, only <channel> operators may invite
- other clients.
+ <channel> does not have to exist, but if it does, only members of the
+ channel are allowed to invite other users. If the channel mode "+i"
+ is set, only channel "half-ops" (and above) may invite other clients,
+ and if channel mode "+V" is set, nobody can invite other users.
+
+ References:
+ - RFC 2812, 3.2.7 "Invite message"
- JOIN
- JOIN <channels> [<channel-keys>]
+ JOIN {<channel>[,<channel>[,...]] [<key>[,<key>[,...]]] | 0}
.
- Makes the client join the <channels> (comma-separated list), specifying
- the passwords, if needed, in the comma-separated <channel-keys> list.
- A <channel-key> is only needed, if the <channel> mode "+k" is set.
+ Makes the client join the <channel> (comma-separated list), specifying
+ the channel keys ("passwords"). A <channel-key> is only needed if the
+ <channel> has the mode "+k" set.
.
If the channel(s) do not exist, then they will be created.
+ .
+ Using "JOIN 0" parts all channels at once.
+
+ References:
+ - RFC 2812, 3.2.1 "Join message" (client protocol)
+ - RFC 2813, 4.2.1 "Join message" (server protocol)
- KICK
- KICK <channel> <nick> [<kick-message>]
+ KICK <channel>[,<channel>[,...]] <nickname>[,<nickname>[,...]] [<reason>]
.
- Remove <nick> from <channel>, optional with a <kick-message>.
+ Remove users(s) with <nickname>(s) from <channel>(s).
.
- Only <channel> operators are able to KICK.
+ There must be either exactly one <channel> parameter and multiple
+ <nickname> parameters, or as many <channel> parameters as there are
+ <nickname> parameters. The <reason> is shown to the users being
+ kicked, and the nickname of the current user is used when <reason>
+ is omitted.
+
+ References:
+ - RFC 2812, 3.2.8 "Kick command"
- LIST
- LIST [<channels> [<server>]]
+ LIST [<channel>[,<channel>[,...]] [<server>]]
+ .
+ List all visible <channels> (comma-separated list).
.
- List all visible <channels> (comma-seperated list) on the current
- server.
If <server> is given, the command will be forwarded to <server> for
evaluation.
+ References:
+ - RFC 2812, 3.2.6 "List message"
+
- PART
- PART <channel
s> [<part-message>]
+ PART <channel
>[,<channel>[,...]] [<part-message>]
.
- Leave <channels> (comma-separated list), optional with a
- <part-message>.
+ Leave <channel> (comma-separated list), optionally with sending a
+ <part-message> to all the other channel members.
+
+ References:
+ - RFC 2812, 3.2.2 "Part message"
- TOPIC
- TOPIC <channel> <topic>
+ TOPIC <channel> [<topic>]
.
- Set a <topic> for <channel>.
+ Change or view the topic of a channel.
.
- Only <channel> operators are able to set a <topic>.
+ The topic for channel <channel> is returned if there is no <topic>
+ given. If the <topic> parameter is present, the topic for that
+ channel will be changed, if this action is allowed for the user
+ requesting it. If the <topic> parameter is an empty string, the
+ topic for that channel will be removed.
+
+ References:
+ - RFC 2812, 3.2.4 "Topic message"
Administrative Commands
~~~~~~~~~~~~~~~~~~~~~~~
- CONNECT
- CONNECT <target server> [<port> [<remote server> [<mypwd> <peerpwd>]]]
+ CONNECT <server> [<port> [<remote-server> [<my-pwd> <peer-pwd>]]]
.
- Instructs the current server, or <remote server> if specified,
- to connect to <target server>.
+ Instructs the current server, or <remote-server> if specified,
+ to connect to the server named <server>, which must be configured
+ in the server configuration file.
.
- To connect <remote server> you need to have remote oper status.
- If <port> is omitted, it uses the server port of the configuration.
- If <mypwd> and <peerpwd> is given, it uses those passwords instead
- of the ones in the configuration.
+ To use this command, the user must be an IRC Operator. To establish
+ a connection on a <remote-server>, you must have remote IRC operator
+ privileges.
+ .
+ If <port>, <my-pwd> and <peer-pwd> are given, these values override
+ the ones specified in the server configuration file.
+
+ References:
+ - RFC 2812, 3.4.7 "Connect message"
- DIE
- DIE
+ DIE [<message>]
.
Instructs the server to shut down.
+ .
+ The optional (and non-standard) <message> text is sent to each client
+ connected to this server before all connections are closed.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.3 "Die message"
- DISCONNECT
- DISCONNECT [<remote server>]
+ DISCONNECT <server>
+ .
+ Disconnect and disable a locally linked server.
.
- Disconnects the current server, or <remote server> if specified.
- To disconnect a <remote server> you need to have remote oper status.
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- GLINE
- GLINE <nick!user@hostmask> <seconds> :<reason>
+ GLINE <nick!user@hostmask> [<timeout> :<reason>]
+ .
+ This command provides timed G-Lines (network-wide bans).
.
- This command provides timed G-Lines (Network-wide bans).
If a client matches a G-Line, it cannot connect to any server on
- the IRC network. If you put 0 as <seconds>, it makes the G-Line
- permanent.
+ the IRC network for <timeout> seconds. When <timeout> is 0, it make
+ the G-Line permanent.
+ .
+ If no <timeout> and no <reason> is given, the G-Line is removed.
.
- To remove a G-Line, type "GLINE <nick!user@hostmask>".
- To list the G-Lines, type "STATS g".
+ To use this command, the user must be an IRC Operator.
+ .
+ "STATS g" can be used to list all currently active G-Lines.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- KILL
- KILL <nick> <reason>
+ KILL <nickname> <reason>
+ .
+ Forcibly remove all users with a given <nickname> from the IRC
+ network and display the given <reason> to them.
+ .
+ This command is used internally between servers, too, for example
+ to disconnect duplicate <nickname>'s after a "net split".
.
- Forcibly removes <nick> from the IRC network with a <reason>.
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 3.7.1 "Kill message"
- KLINE
- KLINE <nick!user@hostmask> <seconds> :<reason>
+ KLINE <nick!user@hostmask> [<timeout> :<reason>]
+ .
+ This command provides timed K-Lines (server-local bans).
.
- This command provides timed K-Lines (Server-local bans).
- If a client matches a K-Line, it cannot connect to the issued server.
- If you put 0 as <seconds>, it makes the K-Line permanent.
+ If a client matches a K-Line, it cannot connect to this server for
+ <timeout> seconds. When <timeout> is 0, it makes the K-Line permanent.
.
- To remove a K-Line, type "KLINE <nick!user@hostmask>".
- To list the K-Lines, type "STATS k".
+ If no <timeout> and no <reason> is given, the K-Line is removed.
+ .
+ To use this command, the user must be an IRC Operator.
+ .
+ "STATS k" can be used to list all currently active K-Lines.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- OPER
- OPER <user> <password>
+ OPER <name> <password>
+ .
+ Authenticates a user named <name> as an IRC operator on the current
+ server/network.
+ .
+ This operator <name> must be configured in the server configuration.
.
- Authenticates <user> as an IRC operator on the current server/network.
+ Please note that <name> is NOT related to a nickname at all!
+
+ References:
+ - RFC 2812, 3.1.4 "Oper message"
- REHASH
REHASH
.
Causes the server to re-read and re-process its configuration file(s).
+ .
+ While rehashing, no new connections are accepted, but all already
+ established connections stay connected.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.2 "Rehash message"
- RESTART
RESTART
.
Restart the server.
+ .
+ While restarting, all connections are reset and no new connections
+ are accepted.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.4 "Restart message"
- WALLOPS
WALLOPS <message>
.
Sends <message> to all users with user mode "+w".
+ .
+ To use this command, the user must be an IRC Operator.
+ References:
+ - RFC 2812, 4.7 "Operwall message"
IRC Service Commands
~~~~~~~~~~~~~~~~~~~~
- SERVICE
+ SERVICE <name> <reserved1> <distribution> <type> <reserved2> <info>
+ SERVICE <name> <servertoken> <distribution> {<type>|+<modes>} <hops> <info>
+ .
+ Register a new service in the network.
+ .
+ The first form is used by directly linked services and isn't supported
+ by ngIRCd at the moment. The second form announces services connected
+ to remote "pseudo-servers" ("services hubs").
+ .
+ The <distribution> and <type> parameters are ignored by ngIRCd.
+
+ References:
+ - RFC 2812, 3.1.6 "Service message"
+ - RFC 2813, 4.1.4 "Service message"
- SERVLIST
+ SERVLIST [<mask> [<type>]]
+ .
+ List all IRC services currently registered in the network.
+ .
+ The optional <mask> and <type> parameters can be used to limit the
+ listing to services matching the <mask> and that are of type <type>.
+ .
+ Please note that ngIRCd doesn't use any service types at the moment
+ and therefore all services are of type "0".
+
+ References:
+ - RFC 2812, 3.5.1 "Servlist message"
- SQUERY
+ SQUERY <target>[,<target>[,...]] <message>
+ .
+ Send a <message> to a given <target> IRC service, and report all
+ errors.
+ .
+ The "SQUERY" command exactly behaves like the "PRIVMSG" command, but
+ enforces that the <target> of the <message> is an IRC service.
+ Please see the help text of the "PRIVMSG" command for a detailed
+ description of the parameters!
+ .
+ If a user wants to interact with IRC services, he should use "SQUERY"
+ instead of "PRIVMSG" or "NOTICE": only "SQUERY makes sure that no
+ regular user, which uses the nickname of an IRC service, receives
+ the command in error, for example during a "net split"!
+
+ References:
+ - RFC 2812, 2.3.1 "Message format in Augmented BNF"
+ - RFC 2812, 3.3 "Sending messages"
+ - RFC 2812, 3.3.2 "Notice"
- SVSNICK
+ SVSNICK <oldnick> <newnick>
+ .
+ Forcefully change foreign user nicknames. This command is allowed
+ for servers only.
+ .
+ The "SVSNICK" command is forwarded to the server to which the user
+ with nickname <oldnick> is connected to, which in turn generates a
+ regular "NICK" command that then is sent to the client, so no special
+ support in the client software is required.
+
+ References:
+ - ngIRCd GIT commit e3f300d3231f
Server Protocol Commands
CHANINFO is used by servers to inform each other about a channel:
its modes, channel key, user limits and its topic.
.
- See doc/Protocol.txt for more information.
+ The CHANINFO command is allowed on server-links only.
+
+ References:
+ - IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
+ - IRC+, doc/Protocol.txt
- ERROR
ERROR [<message> [<> [...]]]
.
- Return an error message to the server. The first parameter, if given,
- will be logged by the server, all further parameters are silently
- ignored.
+ Inform a client or a server about an error condition. The first
+ parameter, if given, is logged by the server receiving the message,
+ all other parameters are silently ignored.
+ .
+ This command is silently ignored on non-server and non-service links
+ and shouldn't be used by regular IRC clients.
.
- This command is silently ignored on non-server and non-service links.
+ The ERROR message is also sent before terminating a regular client
+ connection.
+
+ References:
+ - RFC 2812, 3.7.4 "Error message"
- METADATA
METADATA <target> <key> <value>
information of clients, like the hostname, the info text ("real name"),
or the user name.
.
- See doc/Protocol.txt for more information.
+ The METADATA command is allowed on server-links only.
+
+ References:
+ - IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
+ - IRC+, doc/Protocol.txt
- NJOIN
+ NJOIN <channel> [<mode>]<nick>[,[<mode>]<nick>[,...]]
+ .
+ The NJOIN command is used on server-links to add users with <nick>
+ and <mode> to a <channel> while peering.
+ .
+ The NJOIN command is allowed on server-links only.
+
+ References:
+ - RFC 2813, 4.2.2 "Njoin message"
- SERVER
+ SERVER <servername> <info>
+ SERVER <servername> <hopcount> <info>
+ SERVER <servername> <hopcount> <token> <info>
+ .
+ The first form registers the local connection as a new server in the
+ network, the second (RFC 1459) and third (RFC 2812) form announce a
+ new remote server in the network.
+ .
+ The SERVER command is allowed on unregistered or server-links only.
+
+ References:
+ - RFC 1459, 4.1.4 "Server message"
+ - RFC 2813, 4.1.2 "Server message"
- SQUIT
- SQUIT <server>
+ SQUIT <server> <comment>
.
Disconnects an IRC Server from the network.
+ .
+ This command is used on server-links, but can be used by IRC Operators
+ to forcefully disconnect servers from the network, too.
+ References:
+ - RFC 2812, 3.1.8 "Squit"
+ - RFC 2813, 4.1.6 "Server quit message"
Dummy Commands
~~~~~~~~~~~~~~
- SUMMON
+ SUMMON <user> [<target> [<channel>]]
+ .
+ This command was intended to call people into IRC who are directly
+ connected to the terminal console of the IRC server -- but is
+ deprecated today. Therefore ngIRCd doesn't really implement this
+ command and always returns an error message, regardless of the
+ parameters given.
+
+ References:
+ - RFC 2812, 4.5 "Summon message"
- USERS
+ USERS [<target>]
+ .
+ This command was intended to list users directly logged in into the
+ console of the IRC server -- but is deprecated today. Therefore ngIRCd
+ doesn't really implement this command and always returns an error
+ message, regardless of the parameters given.
+
+ References:
+ - RFC 2812, 4.6 "Users"
- GET
+ GET [...]
+ .
+ Fake HTTP GET command. When received, the connection is shut down
+ immediately again to protect against crazy web browsers ...
+
+ References:
+ - ngIRCd GIT commit 33e8c2480649
- POST
+ POST [...]
+ .
+ Fake HTTP POST command. When received, the connection is shut down
+ immediately again to protect against crazy web browsers ...
+
+ References:
+ - ngIRCd GIT commit 33e8c2480649
projects / ngircd-alex.git / blobdiff