2 ngIRCd - Next Generation IRC Server
4 (c)2001-2010 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Implement user mode "x": hostname cloaking (closes: #102).
16 - Change MOTD file handling: ngIRCd now caches the contens of the MOTD
17 file, so the daemon now requires a HUP signal or REHASH command to
18 re-read the MOTD file when its content changed.
19 - Allow IRC ops to change channel modes even without OperServerMode set.
20 - Allow IRC operators to use MODE command on any channel (closes: #100).
21 - New configuration option "NoPAM" to disable PAM.
22 - Implement asynchronous user authentication using PAM, please see the
23 file doc/PAM.txt for details.
24 - Implement user mode "c": receive connect/disconnect NOTICEs. Note that
25 this new mode requires the user to be an IRC operator.
26 - Show SSL status in WHOIS output, numeric 275.
28 ngIRCd Release 16 (2010-05-02)
30 ngIRCd 16~rc2 (2010-04-25)
31 - Enhace connection statistics counters: display total number of served
32 connections on daemon shutdown and when a new client connects using
33 the new numeric RPL_STATSCONN (250).
35 ngIRCd 16~rc1 (2010-03-25)
36 - Implement WEBIRC command used by some Web-IRC frontends. The password
37 required to secure this command must be configured using the new
38 "WebircPassword" variable in the ngircd.conf file.
39 - Remove limit on max number of configured irc operators.
40 - A new channel mode "secure connections only" (+z) has been implemented:
41 Only clients using a SSL encrypted connection to the server are allowed
42 to join such a channel.
43 But please note three things: a) already joined clients are not checked
44 when setting this mode, b) IRC operators are always allowed to join
45 every channel, and c) remote clients using a server not supporting this
46 mode are not checked either and therefore always allowed to join.
48 ngIRCd Release 15 (2009-11-07)
50 ngIRCd 15~rc1 (2009-10-15)
51 - Do not add default listening port (6667) if SSL ports were specified, so
52 ngIRCd can be configured to only accept SSL-encrypted connections now.
53 - Enable IRC operators to use the IRC command SQUIT (insted of the already
54 implemented but non-standard DISCONNECT command).
55 - New configuration option "AllowRemoteOper" (disabled by default) that
56 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
58 - Enforce upper limit on maximum number of handled commands. This implements
59 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
60 per second before a one second pause is enforced.
62 ngIRCd Release 14.1 (2009-05-05)
64 - Security: fix remotely triggerable crash in SSL/TLS code.
65 - Debian: build ngircd-full-dbg package.
66 - Allow ping timeout quit messages to show the timeout value.
68 ngIRCd Release 14 (2009-04-20)
70 ngIRCd 14~rc1 (2009-03-29)
71 - Allow creation of persistent modeless channels.
72 - The INFO command reports the compile time now (if available).
73 - Support individual channel keys for pre-defined channels: introduce
74 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
75 here a file can be configured for each pre-defined channel which contains
76 individual channel keys for different users.
77 - Remove limit on maximum number of predefined channels in ngircd.conf.
79 ngIRCd Release 13 (2008-12-25)
81 ngIRCd 13~rc1 (2008-11-21):
82 - New version number scheme :-)
83 - Initial support for IRC services, using a RFC1459 style interface,
84 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
85 For this to work, ngIRCd now supports server-server links conforming
86 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
87 - Support for SSL-encrypted server-server and client-server links using
88 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
89 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
90 SSLCertFile, SSLDHFile, and SSLConnect.
91 - Server local channels have been implemented, prefix "&", that are only
92 visible to users of the same server and are not visible in the network.
93 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
94 all the messages to it that a user with mode +s receives.
95 - New make target "osxpkg" to build a Mac OS X installer package.
96 - New configuration option "NoIdent" to disable IDENT lookups even if the
97 daemon is compiled with IDENT support.
99 ngIRCd 0.12.1 (2008-07-09)
101 - Add option aliases -V (for --version) and -h (for --help).
102 - Make Listen parameter a comma-separated list of addresses. This also
103 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
104 is treated as Listen="::,0.0.0.0".
105 Note: ListenIPv4 and ListenIPv6 options are still recognized,
106 but ngircd will print a warning if they are used in the config file.
108 ngIRCd 0.12.0 (2008-05-13)
110 ngIRCd 0.12.0-pre2 (2008-04-29)
111 - IPv6: Add config options to disable ipv4/ipv6 support.
113 ngIRCd 0.12.0-pre1 (2008-04-20)
115 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
116 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
117 enhanced test suite to check these commands. (Dana Dahlstrom)
118 - IRC_WHO now supports search patterns and will test this against user
119 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
120 (reported by Dana Dahlstrom)
121 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
122 as if the user had sent PART commands for all channels the user is a
123 member of. (Dana Dahlstrom)
124 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
126 ngIRCd 0.11.0 (2008-01-15)
128 - Add support for /STAT u (server uptime) command.
129 - New [Server] configuration Option "Bind" allows to specify
130 the source IP address to use when connecting to remote server.
131 - New configuration option "MaxNickLength" to specify the allowed maximum
132 length of user nick names. Note: must be unique in an IRC network!
133 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
134 - Added new server configuration option "Passive" for "Server" blocks to
135 disable automatic outgoing connections (similar to -p option to ngircd,
136 but only for the specified server). (Tassilo Schweyer)
137 - Added support for the WALLOPS command. Usage is restricted to IRC
140 ngIRCd 0.10.2 (2007-06-08)
142 - Predefined channel configuration now allows specification of channel key
143 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
144 - When using the epoll() IO interface, compile in the select() interface as
145 well and fall back to it when epoll() isn't available on runtime.
146 - Added support for IO APIs "poll()" and "/dev/poll".
148 ngIRCd 0.10.1 (2006-12-17)
150 - Allow PASS syntax defined in RFC 1459 for server links, too.
151 - New configuration option "PredefChannelsOnly": if set, clients can only
152 join predefined channels.
154 ngIRCd 0.10.0 (2006-10-01)
156 ngIRCd 0.10.0-pre1 (2006-08-02)
157 - Enhanced DIE to accept a single parameter ("comment text") which is sent
158 to all locally connected clients before the server goes down.
159 - JOIN now supports more than one channel key at a time.
160 - Implemented numeric "333": Time and user name who set a channel topic.
161 - Channel topics are no longer limited to 127 characters: now the only limit
162 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
163 limits the topic to about 490 characters due to protocol overhead).
164 - Reverse DNS lookup code now checks the result by doing an additional
165 lookup to prevent spoofing.
166 - Added new IO layer which (optionally) supports epoll() and kqueue() in
167 addition to the select() interface.
169 ngIRCd 0.9.0 (2005-07-24)
171 - Never run with root privileges but always switch the user ID.
172 - Make "netsplit" messages RFC compliant.
173 - Implemented the IRC function "WHOWAS".
174 - New configuration option "OperServerMode" to enable a workaround needed
175 when running an network with ircd2 servers and "OperCanUseMode" enabled
176 to prevent the ircd2 daemon to drop mode changes of IRC operators.
177 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
178 - Implemented support for "secret channels" (channel mode "s").
179 - New configuration option "Mask" for [Operator] sections to limit OPER
180 commands to users with a specific IRC mask. Patch from Florian Westphal.
181 - New configuration variable "PidFile", section "[Global]": if defined,
182 the server writes its process ID (PID) to this file. Default: off.
183 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
184 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
185 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
186 API will be autodetected when you call "./configure --with-rendezvous".
188 ngIRCd 0.8.0 (2004-06-26)
190 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
191 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
192 its root and working directory to something "safe". MotdPhrase is used
193 to define an "MOTD string" instead of a whole file, useful if the
194 "real" MOTD file would be outside the "jail".
195 - INVITE- and BAN-lists become synchronized between IRC+ servers when
196 establishing new connections, if the peer supports this as well.
197 - The type of service (TOS) of all sockets is set to "interactive" now.
198 - Added short command line option "-t" as alternative to "--configtest".
199 - Added optional support for "IDENT" lookups on incoming connections. You
200 have to enable this function with the ./configure switch "--with-ident".
201 The default is not to do IDENT lookups.
203 ngIRCd 0.7.5 (2003-07-11)
205 - New configuration variable "MaxConnectionsIP" to limit the number of
206 simultaneous connections from a single IP that the server will accept.
207 This configuration options lowers the risk of denial of service attacks
208 (DoS), the default is 5 connections per client IP.
209 - Added new configuration variable "Listen" to bind all listening
210 sockets of the server to a single IP address.
212 ngIRCd 0.7.1 (2003-07-18)
214 - Added support for GNU/Hurd.
216 ngIRCd 0.7.0 (2003-05-01)
218 - New command CONNECT to enable and add server links. The syntax is not
219 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
220 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
221 to add a new server (ngIRCd tries to connect new servers only once!).
222 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
223 - New command TRACE (you can trace only servers at the moment).
224 - New command HELP that lists all understood commands.
225 - ngIRCd can register itself with Rendezvous: to enable support pass the
226 new switch "--with-rendezvous" to configure.
227 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
228 configure to enable it.
229 - Changed some configure options to use "--with"/"--without" as prefix
230 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
231 "--with-tcp-wrappers", and "--with-rendezvous".
232 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
233 - Documentation is now installed in $(datadir)/doc/ngircd.
236 Older news (sorry, only available in german language):
238 ngIRCd 0.6.0, 2002-12-24
240 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
241 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
242 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
243 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
244 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
245 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
246 Der Default ist -1, "unlimitiert".
247 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
248 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
249 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
250 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
251 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
252 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
253 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
254 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
255 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
256 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
257 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
258 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
259 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
260 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
261 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
262 miteinander ueber komprimiert Links kommunizieren.
263 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
264 der Channels, in denen ein User Mitglied sein kann, begrent werden.
265 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
267 ngIRCd 0.5.0, 20.09.2002
269 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
270 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
271 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
272 dem "nativen" (ggf. pre-ANSI) Compiler.
273 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
274 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
275 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
276 wenn kein User mehr im Channel ist.
277 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
278 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
279 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
280 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
281 "AdminInfo2" und "AdminEMail".
282 - Invite- und Ban-Lists implementiert.
283 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
284 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
285 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
287 ngIRCd 0.4.2, 29.04.2002
289 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
290 Regular Expressions (bis auf "*") unterstuetzt.
292 ngIRCd 0.4.0, 01.04.2002
294 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
295 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
296 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
297 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
298 zusaetzliche Informationen.
299 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
300 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
301 nicht, so wird der naechste probiert.
302 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
303 einen Hash-Wert gesucht: sollte deutlich schneller sein.
304 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
305 gelesen und die dann verwendeten Werte angezeigt.
306 - Client-Mode "s" (Server Notices) implementiert.
307 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
308 alternative Konfigurationsdatei angegeben werden.
309 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
310 zu einer anderen User-ID und Group-ID wechseln.
312 ngIRCd 0.3.0, 02.03.2002
314 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
315 er auf den IRC-Befehl RESTART reagiert.
316 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
317 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
318 Zum Debuggen manchmal ganz praktisch :-)
319 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
320 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
321 - AWAY (und der User-Mode 'a') ist nun implementiert.
322 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
323 - Channel- und Nicknames werden nun ordentlich validiert.
325 ngIRCd 0.2.0, 15.02.2002
327 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
328 Server versteht an User-Modes o und v, beachtet letzteres allerdings
329 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
330 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
331 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
332 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
334 ngIRCd 0.1.0, 29.01.2002
336 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
337 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
338 Chatten in Channels ist aber natuerlich moeglich ;-)
339 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
340 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
341 - FAQ.txt in doc/ begonnen.
343 ngIRCd 0.0.3, 16.01.2002
345 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
346 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
347 IRC-Netzwerk arbeiten.
348 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
349 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
350 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
351 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
352 - neue Befehle: LUSERS, LINKS.
354 ngIRCd 0.0.2, 06.01.2002
356 - neuer Aufbau der Konfigurationsdatei,
357 - mehrere IRC-Operatoren koennen konfiguriert werden,
358 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
359 nur "leafed server" sein, d.h. keine "Client-Server" haben.
361 ngIRCd 0.0.1, 31.12.2001
363 - erste oeffentliche Version von ngIRCd als "public preview" :-)
367 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $