.\"
.\" ngircd.conf(5) manual page template
.\"
-.TH ngircd.conf 5 "Mar 2012" ngircd "ngIRCd Manual"
+.TH ngircd.conf 5 "Oct 2014" ngIRCd "ngIRCd Manual"
.SH NAME
ngircd.conf \- configuration file of ngIRCd
.SH SYNOPSIS
section, like the server name, administrative information and the ports on
which the server should be listening. The variables in this section have to be
adjusted to the local requirements most of the time, whereas all the variables
-in the other sections can be left on there defaults very often.
+in the other sections can be left on their defaults very often.
.PP
Options in the
.I [Limits]
blocks are used to configure pre-defined ("persistent") IRC channels.
.PP
There can be more than one [Operator], [Server] and [Channel] section per
-configuration file (one for each operator, server, and channel), but only
-exactly one [Global], one [Limits], one [Options], and one [SSL] section.
+configuration file, one for each operator, server, and channel. [Global],
+[Limits], [Options], and [SSL] sections can occure multiple times, too, but
+each variable overwrites itself, only the last assignment is relevant.
.SH [GLOBAL]
The
.I [Global]
-section of this file is used to define the main configuration of the server,
+section is used to define the main configuration of the server,
like the server name and the ports on which the server should be listening.
These settings depend on your personal preferences, so you should make sure
that they correspond to your installation and setup!
Information about the server and the administrator, used by the ADMIN
command. This information is not required by the server but by RFC!
.TP
+\fBHelpFile\fR (string)
+Text file which contains the ngIRCd help text. This file is required
+to display help texts when using the "HELP <cmd>" command.
+Please note: Changes made to this file take effect when ngircd starts up
+or is instructed to re-read its configuration file.
+.TP
\fBInfo\fR (string)
Info text of the server. This will be shown by WHOIS and LINKS requests for
example.
\fBMotdPhrase\fR (string)
A simple Phrase (<256 chars) if you don't want to use a MOTD file.
.TP
+\fBNetwork\fR (string)
+The name of the IRC network to which this server belongs. This name is
+optional, should only contain ASCII characters, and can't contain spaces.
+It is only used to inform clients. The default is empty, so no network
+name is announced to clients.
+.TP
\fBPassword\fR (string)
Global password for all users needed to connect to the server. The default is
empty, so no password is required. Please note: This feature is not available
.TP
\fBPidFile\fR (string)
This tells ngIRCd to write its current process ID to a file. Note that the
-pidfile is written AFTER chroot and switching the user ID, e.g. the directory
-the pidfile resides in must be writable by the ngIRCd user and exist in the
-chroot directory (if configured, see above).
+"PID file" is written AFTER chroot and switching the user ID, therefore the
+directory the file resides in must be writable by the ngIRCd user and exist
+in the chroot directory (if configured, see above).
.TP
\fBPorts\fR (list of numbers)
-Ports on which the server should listen for unencrypted connections. There
-may be more than one port, separated with commas (","). Default: 6667.
+Port number(s) on which the server should listen for unencrypted connections.
+There may be more than one port, separated with commas (","). Default: 6667.
.TP
\fBServerGID\fR (string or number)
-Group ID under which the ngIRCd should run; you can use the name of the
+Group ID under which the ngIRCd daemon should run; you can use the name of the
group or the numerical ID.
.PP
.RS
.RE
.TP
\fBServerUID\fR (string or number)
-User ID under which the server should run; you can use the name of the user
-or the numerical ID.
+User ID under which the ngIRCd daemon should run; you can use the name of the
+user or the numerical ID.
.PP
.RS
.B Attention:
otherwise RESTART and REHASH won't work!
.RE
.SH [LIMITS]
-Define some limits and timeouts for this ngIRCd instance. Default values
-should be safe, but it is wise to double-check :-)
+This section is used to define some limits and timeouts for this ngIRCd
+instance. Default values should be safe, but it is wise to double-check :-)
.TP
\fBConnectRetry\fR (number)
The server tries every <ConnectRetry> seconds to establish a link to not yet
(or no longer) connected servers. Default: 60.
.TP
+\fBIdleTimeout\fR (number)
+Number of seconds after which the whole daemon should shutdown when no
+connections are left active after handling at least one client (0: never). This
+can be useful for testing or when ngIRCd is started using "socket activation"
+with systemd(8), for example. Default: 0.
+.TP
\fBMaxConnections\fR (number)
Maximum number of simultaneous in- and outbound connections the server is
allowed to accept (0: unlimited). Default: 0.
Default: 10.
.TP
\fBMaxNickLength\fR (number)
-Maximum length of an user nick name (Default: 9, as in RFC 2812). Please
-note that all servers in an IRC network MUST use the same maximum nick name
+Maximum length of an user nickname (Default: 9, as in RFC 2812). Please
+note that all servers in an IRC network MUST use the same maximum nickname
length!
.TP
+\fBMaxListSize\fR (number)
+Maximum number of channels returned in response to a LIST command. Default: 100.
+.TP
\fBPingTimeout\fR (number)
After <PingTimeout> seconds of inactivity the server will send a PING to
the peer to test whether it is alive or not. Default: 120.
seconds, it will be disconnected by the server. Default: 20.
.SH [OPTIONS]
Optional features and configuration options to further tweak the behavior of
-ngIRCd. If you want to get started quickly, you most probably don't have to
-make changes here -- they are all optional.
+ngIRCd are configured in this section. If you want to get started quickly, you
+most probably don't have to make changes here -- they are all optional.
+.TP
+\fBAllowedChannelTypes\fR (string)
+List of allowed channel types (channel prefixes) for newly created channels
+on the local server. By default, all supported channel types are allowed.
+Set this variable to the empty string to disallow creation of new channels
+by local clients at all. Default: #&+
.TP
\fBAllowRemoteOper\fR (boolean)
-Are IRC operators connected to remote servers allowed to control this server,
-e.g. are they allowed to use administrative commands like CONNECT, DIE,
-SQUIT, ... that affect this server? Default: no.
+If this option is active, IRC operators connected to remote servers are allowed
+to control this local server using administrative commands, for example like
+CONNECT, DIE, SQUIT etc. Default: no.
.TP
\fBChrootDir\fR (string)
A directory to chroot in when everything is initialized. It doesn't need
generated after each server start.
.TP
\fBCloakUserToNick\fR (boolean)
-Set every clients' user name to their nick name and hide the one supplied
+Set every clients' user name to their nickname and hide the one supplied
by the IRC client. Default: no.
.TP
\fBConnectIPv4\fR (boolean)
the IPv6 protocol.
Default: yes.
.TP
+\fBDefaultUserModes\fR (string)
+Default user mode(s) to set on new local clients. Please note that only modes
+can be set that the client could set using regular MODE commands, you can't
+set "a" (away) for example!
+Default: none.
+.TP
\fBDNS\fR (boolean)
If set to false, ngIRCd will not make any DNS lookups when clients connect.
If you configure the daemon to connect to other servers, ngIRCd may still
prepended to their user name.
Default: yes.
.TP
+\fBIncludeDir\fR (string)
+Directory containing configuration snippets (*.conf), that should be read in
+after parsing the current configuration file.
+Default: none.
+.TP
\fBMorePrivacy\fR (boolean)
This will cause ngIRCd to censor user idle time, logon time as well as the
part/quit messages (that are sometimes used to inform everyone about which
Should IRC Operators be allowed to use the MODE command even if they are
not(!) channel-operators? Default: no.
.TP
+\fBOperChanPAutoOp\fR (boolean)
+Should IRC Operators get AutoOp (+o) in persistent (+P) channels?
+Default: yes.
+.TP
\fBOperServerMode\fR (boolean)
If \fBOperCanUseMode\fR is enabled, this may lead the compatibility problems
with Servers that run the ircd-irc2 Software. This Option "masks" mode
don't have a "~" character prepended to their respective user names!
Default: no.
.TP
-\fBPredefChannelsOnly\fR (boolean)
-If enabled, no new channels can be created. Useful if you do not want to have
-other channels than those defined in [Channel] sections in the configuration
-file on this server.
-Default: no.
-.TP
\fBRequireAuthPing\fR (boolean)
Let ngIRCd send an "authentication PING" when a new client connects, and
register this client only after receiving the corresponding "PONG" reply.
\fBCertFile\fR (string)
SSL Certificate file of the private server key.
.TP
+\fBCipherList\fR (string)
+Select cipher suites allowed for SSL/TLS connections. This defaults to
+"HIGH:!aNULL:@STRENGTH:!SSLv3" (OpenSSL) or "SECURE128:-VERS-SSL3.0" (GnuTLS).
+Please see 'man 1ssl ciphers' (OpenSSL) and 'man 3 gnutls_priority_init'
+(GnuTLS) for details.
+.TP
\fBDHFile\fR (string)
Name of the Diffie-Hellman Parameter file. Can be created with GnuTLS
"certtool \-\-generate-dh-params" or "openssl dhparam". If this file is not
block, one for each local operator.
.TP
\fBName\fR (string)
-ID of the operator (may be different of the nick name).
+ID of the operator (may be different of the nickname).
.TP
\fBPassword\fR (string)
Password of the IRC operator.
Connect to the remote server using TLS/SSL. Default: false.
.TP
\fBServiceMask\fR (string)
-Define a (case insensitive) list of masks matching nick names that should be
+Define a (case insensitive) list of masks matching nicknames that should be
treated as IRC services when introduced via this remote server, separated
by commas (","). REGULAR SERVERS DON'T NEED this parameter, so leave it empty
(which is the default).