;AdminInfo2 = Location
;AdminEMail = admin@irc.server
+ # Text file which contains the ngIRCd help text. This file is required
+ # to display help texts when using the "HELP <cmd>" command.
+ ;HelpFile = :DOCDIR:/Commands.txt
+
# Info text of the server. This will be shown by WHOIS and
# LINKS requests for example.
Info = Server Info Text
# A simple Phrase (<256 chars) if you don't want to use a motd file.
;MotdPhrase = "Hello world!"
+ # The name of the IRC network to which this server belongs. This name
+ # is optional, should only contain ASCII characters, and can't contain
+ # spaces. It is only used to inform clients. The default is empty,
+ # so no network name is announced to clients.
+ ;Network = aIRCnetwork
+
# Global password for all users needed to connect to the server.
# (Default: not set)
;Password = abc
# This tells ngIRCd to write its current process ID to a file.
# Note that the pidfile is written AFTER chroot and switching the
# user ID, e.g. the directory the pidfile resides in must be
- # writeable by the ngIRCd user and exist in the chroot directory.
+ # writable by the ngIRCd user and exist in the chroot directory.
;PidFile = /var/run/ngircd/ngircd.pid
# Ports on which the server should listen. There may be more than
# to not yet (or no longer) connected servers.
;ConnectRetry = 60
+ # Number of seconds after which the whole daemon should shutdown when
+ # no connections are left active after handling at least one client
+ # (0: never, which is the default).
+ # This can be useful for testing or when ngIRCd is started using
+ # "socket activation" with systemd(8), for example.
+ ;IdleTimeout = 0
+
# Maximum number of simultaneous in- and outbound connections the
# server is allowed to accept (0: unlimited):
;MaxConnections = 0
# Maximum number of channels a user can be member of (0: no limit):
;MaxJoins = 10
- # Maximum length of an user nick name (Default: 9, as in RFC 2812).
+ # Maximum length of an user nickname (Default: 9, as in RFC 2812).
# Please note that all servers in an IRC network MUST use the same
- # maximum nick name length!
+ # maximum nickname length!
;MaxNickLength = 9
+ # Maximum number of channels returned in response to a /list
+ # command (0: unlimited):
+ ;MaxListSize = 100
+
# After <PingTimeout> seconds of inactivity the server will send a
# PING to the peer to test whether it is alive or not.
;PingTimeout = 120
[Options]
# Optional features and configuration options to further tweak the
- # behavior of ngIRCd. If you wan't to get started quickly, you most
+ # behavior of ngIRCd. If you want to get started quickly, you most
# probably don't have to make changes here -- they are all optional.
+ # List of allowed channel types (channel prefixes) for newly created
+ # channels on the local server. By default, all supported channel
+ # types are allowed. Set this variable to the empty string to disallow
+ # creation of new channels by local clients at all.
+ ;AllowedChannelTypes = #&+
+
# Are remote IRC operators allowed to control this server, e.g.
# use commands like CONNECT, SQUIT, DIE, ...?
;AllowRemoteOper = no
;ChrootDir = /var/empty
# Set this hostname for every client instead of the real one.
- # Please note: don't use the percentage sign ("%"), it is reserved for
- # future extensions!
- ;CloakHost = irc.example.net
+ # Use %x to add the hashed value of the original hostname.
+ ;CloakHost = cloaked.host
+
+ # Use this hostname for hostname cloaking on clients that have the
+ # user mode "+x" set, instead of the name of the server.
+ # Use %x to add the hashed value of the original hostname.
+ ;CloakHostModeX = cloaked.user
+
+ # The Salt for cloaked hostname hashing. When undefined a random
+ # hash is generated after each server start.
+ ;CloakHostSalt = abcdefghijklmnopqrstuvwxyz
- # Set every clients' user name to their nick name
+ # Set every clients' user name to their nickname
;CloakUserToNick = yes
# Try to connect to other IRC servers using IPv4 and IPv6, if possible.
;ConnectIPv6 = yes
;ConnectIPv4 = yes
- # Do any DNS lookups when a client connects to the server.
+ # Default user mode(s) to set on new local clients. Please note that
+ # only modes can be set that the client could set using regular MODE
+ # commands, you can't set "a" (away) for example! Default: none.
+ ;DefaultUserModes = i
+
+ # Do DNS lookups when a client connects to the server.
;DNS = yes
# Do IDENT lookups if ngIRCd has been compiled with support for it.
+ # Users identified using IDENT are registered without the "~" character
+ # prepended to their user name.
;Ident = yes
+ # Directory containing configuration snippets (*.conf), that should
+ # be read in after parsing this configuration file.
+ ;IncludeDir = :ETCDIR:/conf.d
+
+ # Enhance user privacy slightly (useful for IRC server on TOR or I2P)
+ # by censoring some information like idle time, logon time, etc.
+ ;MorePrivacy = no
+
# Normally ngIRCd doesn't send any messages to a client until it is
# registered. Enable this option to let the daemon send "NOTICE AUTH"
# messages to clients while connecting.
# they are not(!) channel-operators?
;OperCanUseMode = no
+ # Should IRC Operators get AutoOp (+o) in persistent (+P) channels?
+ ;OperChanPAutoOp = yes
+
# Mask IRC Operator mode requests as if they were coming from the
# server? (This is a compatibility hack for ircd-irc2 servers)
;OperServerMode = no
# Use PAM if ngIRCd has been compiled with support for it.
- ;PAM = no
-
- # Allow Pre-Defined Channels only (see Section [Channels])
- ;PredefChannelsOnly = no
+ # Users identified using PAM are registered without the "~" character
+ # prepended to their user name.
+ ;PAM = yes
+
+ # When PAM is enabled, all clients are required to be authenticated
+ # using PAM; connecting to the server without successful PAM
+ # authentication isn't possible.
+ # If this option is set, clients not sending a password are still
+ # allowed to connect: they won't become "identified" and keep the "~"
+ # character prepended to their supplied user name.
+ # Please note: To make some use of this behavior, it most probably
+ # isn't useful to enable "Ident", "PAM" and "PAMIsOptional" at the
+ # same time, because you wouldn't be able to distinguish between
+ # Ident'ified and PAM-authenticated users: both don't have a "~"
+ # character prepended to their respective user names!
+ ;PAMIsOptional = no
# Let ngIRCd send an "authentication PING" when a new client connects,
# and register this client only after receiving the corresponding
# "PONG" reply.
;RequireAuthPing = no
+ # Silently drop all incoming CTCP requests.
+ ;ScrubCTCP = no
+
# Syslog "facility" to which ngIRCd should send log messages.
# Possible values are system dependent, but most probably auth, daemon,
# user and local1 through local7 are possible values; see syslog(3).
# So don't forget to remove the ";" above if this is the case ...
# SSL Server Key Certificate
- ;SSLCertFile = :ETCDIR:/ssl/server-cert.pem
+ ;CertFile = :ETCDIR:/ssl/server-cert.pem
+
+ # Select cipher suites allowed for SSL/TLS connections. This defaults
+ # to HIGH:!aNULL:@STRENGTH (OpenSSL) or SECURE128 (GnuTLS).
+ # See 'man 1ssl ciphers' (OpenSSL) or 'man 3 gnutls_priority_init'
+ # (GnuTLS) for details.
+ # For OpenSSL:
+ ;CipherList = HIGH:!aNULL:@STRENGTH
+ # For GnuTLS:
+ ;CipherList = SECURE128
# Diffie-Hellman parameters
- ;SSLDHFile = :ETCDIR:/ssl/dhparams.pem
+ ;DHFile = :ETCDIR:/ssl/dhparams.pem
# SSL Server Key
- ;SSLKeyFile = :ETCDIR:/ssl/server-key.pem
+ ;KeyFile = :ETCDIR:/ssl/server-key.pem
# password to decrypt SSLKeyFile (OpenSSL only)
- ;SSLKeyFilePassword = secret
+ ;KeyFilePassword = secret
# Additional Listen Ports that expect SSL/TLS encrypted connections
- ;SSLPorts = 6697, 9999
+ ;Ports = 6697, 9999
[Operator]
# [Operator] sections are used to define IRC Operators. There may be
# more than one [Operator] block, one for each local operator.
- # ID of the operator (may be different of the nick name)
+ # ID of the operator (may be different of the nickname)
;Name = TheOper
# Password of the IRC operator
# Connect to the remote server using TLS/SSL (Default: false)
;SSLConnect = yes
- # Define a (case insensitive) mask matching nick names that should be
- # treated as IRC services when introduced via this remote server.
+ # Define a (case insensitive) list of masks matching nicknames that
+ # should be treated as IRC services when introduced via this remote
+ # server, separated by commas (",").
# REGULAR SERVERS DON'T NEED this parameter, so leave it empty
# (which is the default).
# When you are connecting IRC services which mask as a IRC server
# and which use "virtual users" to communicate with, for example
# "NickServ" and "ChanServ", you should set this parameter to
- # something like "*Serv".
- ;ServiceMask = *Serv
+ # something like "*Serv" or "NickServ,ChanServ,XyzServ".
+ ;ServiceMask = *Serv,Global
[Server]
# More [Server] sections, if you like ...