~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- CAP
+ CAP LS
+ CAP LIST
+ CAP REQ <capabilities>
+ CAP ACK <capabilities>
+ CAP NAK <capabilities>
+ CAP CLEAR
+ CAP END
+ .
+ List, request, and clear "IRC Capabilities".
+ .
+ Using this command, an IRC client can request additional "IRC
+ capabilities" during login or later on, which influences the
+ communication between server and client. Normally, these commands
+ aren't directly used by humans, but automatically by their client
+ software. And please note that issuing such commands manually can
+ irritate the client software used, because of the "non-standard"
+ behavior of the server!
+ .
+ - CAP LS: list all available capabilities.
+ - CAP LIST: list active capabilities of this connection.
+ - CAP REQ: Request particular capabilities.
+ - CAP ACK: Acknowledge a set of capabilities to be enabled/disabled.
+ - CAP NAK: Reject a set of capabilities.
+ - CAP CLEAR: Clear all set capabilities.
+ - CAP END: Indicate end of capability negotiation during login,
+ ignored in an fully registered session.
+
+ Please note that the <capabilities> must be given in a single
+ parameter but whitespace separated, therefore a command could look
+ like this: "CAP REQ :capability1 capability2 capability3" for example.
+
+ References:
+ - <http://ircv3.atheme.org/specification/capability-negotiation-3.1>
+ - <http://ngircd.barton.de/doc/Capabilities.txt>
+ - doc/Capabilities.txt
- CHARCONV
+ CHARCONV <client-charset>
+ .
+ Set client character set encoding to <client-charset>.
+ .
+ After receiving such a command, the server translates all message
+ data received from the client using the set <client-charset> to the
+ server encoding (UTF-8), and all message data which is to be sent to
+ the client from the server encoding (UTF-8) to <client-charset>.
+ .
+ This enables older clients and clients using "strange" character sets
+ to transparently participate in channels and direct messages to
+ clients using UTF-8, which should be the default today.
+
+ References:
+ - <http://ngircd.barton.de/doc/Protocol.txt>
+ - doc/Protocol.txt
- NICK
+ NICK <nick>
+ .
+ Change your nickname to <nick>.
- PASS
+ PASS <password> <version> <flags> [<options>]
+ .
+ Set a connection <password>. This command must be sent before the
+ NICK/USER registration combination.
+ .
+ See doc/Protocol.txt for more info.
- PING
+ PING <server1> [<server2>]
+ .
+ Tests the presence of a connection. A PING message results in a PONG
+ reply. If <server2> is specified, the message gets passed on to it.
- PONG
+ PONG <server1> [<server2>]
+ .
+ This command is a reply to the PING command and works in much the
+ same way.
- QUIT
QUIT [<quit-message>]
channels that you are a member of when leaving.
- USER
+ USER <user> <modes> <realname>
+ .
+ This command is used at the beginning of a connection to specify the
+ <user>name, hostname, <realname> and initial user <modes> of the
+ connecting client.
+ .
+ <realname> may contain spaces, and thus must be prefixed with a colon.
- WEBIRC
+ See doc/Protocol.txt
General Commands
~~~~~~~~~~~~~~~~
- AWAY
+ AWAY [<message>]
+ .
+ Provides the server with a message to automatically send in reply to a
+ PRIVMSG directed at the user, but not to a channel they are on.
+ .
+ If <message> is omitted, the away status is removed.
- HELP
HELP [<command>]
- MODE
+ MODE <nickname> <flags> (user)
+ MODE <channel> <flags> [<args>]
+ .
+ The MODE command is dual-purpose. It can be used to set both (user) and
+ <channel> modes.
+ .
+ See doc/Modes.txt for more information.
- NOTICE
+ NOTICE <target> <notice>
+ .
+ Send <notice> to <target> (nick or channel).
+ .
+ This command works similarly to PRIVMSG, except automatic replies must
+ never be sent in reply to NOTICE messages.
- PRIVMSG
+ PRIVMSG <target> <message>
+ .
+ Send <message> to <target> (nick or channel).
+ .
+ Common IRC clients use MSG as PRIVMSG alias.
+ (Some clients use "QUERY <nick> [<message>]" to open a private chat.)
Status and Informational Commands
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- ADMIN
- ADMIN [<server>]
+ ADMIN [<target>]
.
Show administrative information about an IRC server in the network.
- If no server name has been given, the local server will respond.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connecion is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.4.9 "Admin command"
- INFO
+ INFO [<target>]
+ .
+ Show the version, birth & online time of an IRC server in the network.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connecion is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.4.10 "Info command"
- ISON
+ ISON <nickname> [<nickname> [...]]
+ .
+ Query online status of a list of nicknames. The server replies with
+ a list only containing nicknes actually connected to a server in
+ the network. If no nicknames of the given list are online, an empty
+ list is returned to the client requesting the information.
+
+ Please note that "all" IRC daemons even parse separate nicknames in
+ a single parameter (like ":nick1 nick2"), and therefore ngIRCd
+ implements this behaviour, too.
+
+ References:
+ - RFC 2812, 4.9 "Ison message"
- LINKS
+ LINKS [[<target>] [<mask>]
+ .
+ List all servers currently registered in the network matching <mask>,
+ or all servers if <mask> has been omitted, as seen by the server
+ specified by <target> or the local server when <target> is omitted.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+
+ References:
+ - RFC 2812, 3.4.5 "Links message"
- LUSERS
+ LUSERS [<mask> [<target>]]
+ .
+ Return statistics about the number of clients (users, servers,
+ services, ...) in the network as seen by the server <target>.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connecion is used when <target> is omitted.
+
+ Please note that ngIRCd ignores the <mask> parameter entirely: it
+ is not possible to get information for a part of the network only.
+
+ References:
+ - RFC 2812, 3.4.2 "Lusers message"
- MOTD
+ MOTD [<target>]
+ .
+ Show the "Message of the Day" (MOTD) of an IRC server in the network.
+ .
+ <target> can be a server name, the nickname of a client connected to
+ a specific server, or a mask matching a server name in the network.
+ The server of the current connecion is used when <target> is omitted.
+
+ References:
+ - RFC 2812, 3.4.1 "Motd message"
- NAMES
+ NAMES [<channels> [<server>]]
+ .
+ Returns a list of who is on the comma-separated list of <channels>,
+ by channel name.
+ .
+ If <channels> is omitted, all users are shown, grouped by channel name
+ with all users who are not on a channel being shown as part of channel
+ "*".
+ If <server> is specified, the command is sent to <server> for
+ evaluation.
- STATS
+ STATS <flag> [<server>]
+ .
+ Returns statistics about the current server, or of a specified <server>.
+ .
+ STATS flags:
+ .
+ g = G-Lines (Network-wide bans)
+ k = K-Lines (Server-local bans)
+ l = Link status (Parent server and own link)
+ m = IRC command status (usage count)
+ u = Server uptime
- TIME
+ TIME [<server>]
+ .
+ Show the local time of the current server, or of a specified <server>.
- TRACE
+ TRACE [<server>]
+ .
+ Trace a path across the IRC network of the current server, or if given
+ of a specific <server>, in a similar method to traceroute.
- USERHOST
+ USERHOST <nicknames>
+ .
+ Show the user-host of <nicknames> (seperated by space).
+ "-" means <nick> is away,
+ "+" means <nick> is available,
+ "*" indicates your connection.
- VERSION
+ VERSION [<server>]
+ .
+ Show the ngIRCd version of the current server, or specified <server>.
- WHO
+ WHO [<target> ["o"]]
+ .
+ Returns a list of users who match <target> (nick, hostmask or channel).
+ .
+ If the flag "o" is given, the server will only return information about
+ IRC Operators.
- WHOIS
+ WHOIS [<server>] <nicknames>
+ .
+ Returns information about the comma-separated list of <nicknames>.
+ .
+ If <server> is given, the command is forwarded to it for processing.
- WHOWAS
+ WHOWAS <nickname> [<count> [<server>]]
+ .
+ Used to return information about <nicknames> that are no longer in use
+ (due to client disconnection, or nickname changes).
+ .
+ If given, the server will return information from the last <count> times
+ the nickname has been used.
+ If <server> is given, the command is forwarded to it for processing.
Channel Commands
~~~~~~~~~~~~~~~~
- INVITE
+ INVITE <nick> <channel>
+ .
+ Invites <nick> to <channel>.
+ <channel> does not have to exist, but if it does, only members of the
+ channel are allowed to invite other clients.
+ .
+ If the <channel> mode "+i" is set, only <channel> operators may invite
+ other clients.
- JOIN
+ JOIN <channels> [<channel-keys>]
+ .
+ Makes the client join the <channels> (comma-separated list), specifying
+ the passwords, if needed, in the comma-separated <channel-keys> list.
+ A <channel-key> is only needed, if the <channel> mode "+k" is set.
+ .
+ If the channel(s) do not exist, then they will be created.
- KICK
+ KICK <channel> <nick> [<kick-message>]
+ .
+ Remove <nick> from <channel>, optional with a <kick-message>.
+ .
+ Only <channel> operators are able to KICK.
- LIST
+ LIST [<channels> [<server>]]
+ .
+ List all visible <channels> (comma-seperated list) on the current
+ server.
+ If <server> is given, the command will be forwarded to <server> for
+ evaluation.
- PART
+ PART <channels> [<part-message>]
+ .
+ Leave <channels> (comma-separated list), optional with a
+ <part-message>.
- TOPIC
+ TOPIC <channel> <topic>
+ .
+ Set a <topic> for <channel>.
+ .
+ Only <channel> operators are able to set a <topic>.
Administrative Commands
~~~~~~~~~~~~~~~~~~~~~~~
- CONNECT
+ CONNECT <target server> [<port> [<remote server> [<mypwd> <peerpwd>]]]
+ .
+ Instructs the current server, or <remote server> if specified,
+ to connect to <target server>.
+ .
+ To connect <remote server> you need to have remote oper status.
+ If <port> is omitted, it uses the server port of the configuration.
+ If <mypwd> and <peerpwd> is given, it uses those passwords instead
+ of the ones in the configuration.
- DIE
+ DIE
+ .
+ Instructs the server to shut down.
- DISCONNECT
+ DISCONNECT [<remote server>]
+ .
+ Disconnects the current server, or <remote server> if specified.
+ To disconnect a <remote server> you need to have remote oper status.
- GLINE
+ GLINE <nick!user@hostmask> <seconds> :<reason>
+ .
+ This command provides timed G-Lines (Network-wide bans).
+ If a client matches a G-Line, it cannot connect to any server on
+ the IRC network. If you put 0 as <seconds>, it makes the G-Line
+ permanent.
+ .
+ To remove a G-Line, type "GLINE <nick!user@hostmask>".
+ To list the G-Lines, type "STATS g".
- KILL
+ KILL <nick> <reason>
+ .
+ Forcibly removes <nick> from the IRC network with a <reason>.
- KLINE
+ KLINE <nick!user@hostmask> <seconds> :<reason>
+ .
+ This command provides timed K-Lines (Server-local bans).
+ If a client matches a K-Line, it cannot connect to the issued server.
+ If you put 0 as <seconds>, it makes the K-Line permanent.
+ .
+ To remove a K-Line, type "KLINE <nick!user@hostmask>".
+ To list the K-Lines, type "STATS k".
- OPER
+ OPER <user> <password>
+ .
+ Authenticates <user> as an IRC operator on the current server/network.
- REHASH
+ REHASH
+ .
+ Causes the server to re-read and re-process its configuration file(s).
- RESTART
+ RESTART
+ .
+ Restart the server.
- WALLOPS
+ WALLOPS <message>
+ .
+ Sends <message> to all users with user mode "+w".
IRC Service Commands
~~~~~~~~~~~~~~~~~~~~~~~~
- CHANINFO
+ CHANINFO <channel> +<modes> [[<key> <limit>] <topic>]
+ .
+ CHANINFO is used by servers to inform each other about a channel:
+ its modes, channel key, user limits and its topic.
+ .
+ See doc/Protocol.txt for more information.
- ERROR
ERROR [<message> [<> [...]]]
This command is silently ignored on non-server and non-service links.
- METADATA
+ METADATA <target> <key> <value>
+ .
+ The METADATA command is used on server-links to update "metadata"
+ information of clients, like the hostname, the info text ("real name"),
+ or the user name.
+ .
+ See doc/Protocol.txt for more information.
- NJOIN
- SERVER
- SQUIT
+ SQUIT <server>
+ .
+ Disconnects an IRC Server from the network.
Dummy Commands
projects / ngircd-alex.git / blobdiff