Note additional repositories that may be needed for CentOS builds.

[bup.git] / README.md

bup: It backs things up
=======================

bup is a program that backs things up.  It's short for "backup." Can you
believe that nobody else has named an open source program "bup" after all
this time?  Me neither.

Despite its unassuming name, bup is pretty cool.  To give you an idea of
just how cool it is, I wrote you this poem:

                             Bup is teh awesome
                          What rhymes with awesome?
                            I guess maybe possum
                           But that's irrelevant.
                        
Hmm.  Did that help?  Maybe prose is more useful after all.


Reasons bup is awesome
----------------------

bup has a few advantages over other backup software:

 - It uses a rolling checksum algorithm (similar to rsync) to split large
   files into chunks.  The most useful result of this is you can backup huge
   virtual machine (VM) disk images, databases, and XML files incrementally,
   even though they're typically all in one huge file, and not use tons of
   disk space for multiple versions.
   
 - It uses the packfile format from git (the open source version control
   system), so you can access the stored data even if you don't like bup's
   user interface.
   
 - Unlike git, it writes packfiles *directly* (instead of having a separate
   garbage collection / repacking stage) so it's fast even with gratuitously
   huge amounts of data.  bup's improved index formats also allow you to
   track far more filenames than git (millions) and keep track of far more
   objects (hundreds or thousands of gigabytes).
   
 - Data is "automagically" shared between incremental backups without having
   to know which backup is based on which other one - even if the backups
   are made from two different computers that don't even know about each
   other.  You just tell bup to back stuff up, and it saves only the minimum
   amount of data needed.
   
 - You can back up directly to a remote bup server, without needing tons of
   temporary disk space on the computer being backed up.  And if your backup
   is interrupted halfway through, the next run will pick up where you left
   off.  And it's easy to set up a bup server: just install bup on any
   machine where you have ssh access.
   
 - Bup can use "par2" redundancy to recover corrupted backups even if your
   disk has undetected bad sectors.
   
 - Even when a backup is incremental, you don't have to worry about
   restoring the full backup, then each of the incrementals in turn; an
   incremental backup *acts* as if it's a full backup, it just takes less
   disk space.
   
 - You can mount your bup repository as a FUSE filesystem and access the
   content that way, and even export it over Samba.
   
 - It's written in python (with some C parts to make it faster) so it's easy
   for you to extend and maintain.


Reasons you might want to avoid bup
-----------------------------------

 - This is a very early version. Therefore it will most probably not work
   for you, but we don't know why.  It is also missing some
   probably-critical features.
   
 - It requires python >= 2.4, a C compiler, and an installed git version >=
   1.5.3.1.
 
 - It currently only works on Linux, MacOS X >= 10.4,
   NetBSD, Solaris, or Windows (with Cygwin).  Patches to support
   other platforms are welcome.
   
   
Getting started
===============


From source
-----------

 - Check out the bup source code using git:
 
        git clone git://github.com/apenwarr/bup

 - Install the needed python libraries (including the development
   libraries).

   On Debian/Ubuntu this is usually sufficient (run as root):

            apt-get install python2.6-dev python-fuse
            apt-get install python-pyxattr python-pylibacl

   Substitute python2.5-dev or python2.4-dev if you have an older
   system.  Alternately, on newer Debian/Ubuntu versions, you can try
   this:
    
            apt-get build-dep bup

   On CentOS (for CentOS 6, at least), this should be sufficient (run
   as root):

            yum groupinstall "Development Tools"
            yum install python python-dev
            yum install fuse-python pyxattr pylibacl
            yum install perl-Time-HiRes

   In addition to the default CentOS repositories, you may need to add
   RPMForge (for fuse-python) and EPEL (for pyxattr and pylibacl).

 - Build the python module and symlinks:

        make
        
 - Run the tests:
 
        make test
        
    (The tests should pass.  If they don't pass for you, stop here and send
    me an email.)


From binary packages
--------------------

Binary packages of bup are known to be built for the following OSes:

 - Debian:
    http://packages.debian.org/search?searchon=names&keywords=bup
 - Ubuntu:
    http://packages.ubuntu.com/search?searchon=names&keywords=bup
 - pkgsrc (NetBSD, Dragonfly, and others)
    http://pkgsrc.se/sysutils/bup
    http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/bup/


Using bup
---------

 - Try making a local backup as a tar file:
 
        tar -cvf - /etc | bup split -n local-etc -vv
        
 - Try restoring your backup tarball:
 
        bup join local-etc | tar -tf -
        
 - Look at how much disk space your backup took:
 
        du -s ~/.bup
        
 - Make another backup (which should be mostly identical to the last one;
   notice that you don't have to *specify* that this backup is incremental,
   it just saves space automatically):
 
        tar -cvf - /etc | bup split -n local-etc -vv
        
 - Look how little extra space your second backup used on top of the first:
 
        du -s ~/.bup
        
 - Restore your old backup again (the ~1 is git notation for "one older than
   the most recent"):
   
        bup join local-etc~1 | tar -tf -
 
 - Get a list of your previous backups:
 
        GIT_DIR=~/.bup git log local-etc
        
 - Make a backup on a remote server (which must already have the 'bup' command
   somewhere in the server's PATH (see /etc/profile, etc/environment,
   ~/.profile, or ~/.bashrc), and be accessible via ssh.
   Make sure to replace SERVERNAME with the actual hostname of your server):
   
        tar -cvf - /etc | bup split -r SERVERNAME: -n local-etc -vv
 
 - Try restoring the remote backup tarball:
 
        bup join -r SERVERNAME: local-etc | tar -tf -
        
 - Try using the new (slightly experimental) 'bup index' and 'bup save'
   style backups, which bypass 'tar' but have some missing features (see
   "Things that are stupid" below):
        
        bup index -uv /etc
        bup save -n local-etc /etc
        
 - Do it again and see how fast an incremental backup can be:
 
        bup index -uv /etc
        bup save -n local-etc /etc
        
    (You can also use the "-r SERVERNAME:" option to 'bup save', just like
     with 'bup split' and 'bup join'.  The index itself is always local,
     so you don't need -r there.)
        
That's all there is to it!


Notes on FreeBSD
----------------

- FreeBSD's default 'make' command doesn't like bup's Makefile. In order to
  compile the code, run tests and install bup, you need to install GNU Make
  from the port named 'gmake' and use its executable instead in the commands
  seen above. (i.e. 'gmake test' runs bup's test suite)

- Python's development headers are automatically installed with the 'python'
  port so there's no need to install them separately.

- To use the 'bup fuse' command, you need to install the fuse kernel module
  from the 'fusefs-kmod' port in the 'sysutils' section and the libraries from
  the port named 'py-fusefs' in the 'devel' section.

- The 'par2' command can be found in the port named 'par2cmdline'.

- In order to compile the documentation, you need pandoc which can be found in
  the port named 'hs-pandoc' in the 'textproc' section.


Notes on NetBSD/pkgsrc
----------------------

 - See pkgsrc/sysutils/bup, which should be the most recent stable
   release and includes man pages.  It also has a reasonable set of
   dependencies (git, par2, py-fuse-bindings).

 - The "fuse-python" package referred to is hard to locate, and is a
   separate tarball for the python language binding distributed by the
   fuse project on sourceforge.  It is available as
   pkgsrc/filesystems/py-fuse-bindings and on NetBSD 5, "bup fuse"
   works with it.

 - "bup fuse" presents every directory/file as inode 0.  The directory
   traversal code ("fts") in NetBSD's libc will interpret this as a
   cycle and error out, so "ls -R" and "find" will not work.

 - It is not clear if extended attribute and POSIX acl support does
   anything useful.


How it works
============

Basic storage:

bup stores its data in a git-formatted repository.  Unfortunately, git
itself doesn't actually behave very well for bup's use case (huge numbers of
files, files with huge sizes, retaining file permissions/ownership are
important), so we mostly don't use git's *code* except for a few helper
programs.  For example, bup has its own git packfile writer written in
python.

Basically, 'bup split' reads the data on stdin (or from files specified on
the command line), breaks it into chunks using a rolling checksum (similar to
rsync), and saves those chunks into a new git packfile.  There is one git
packfile per backup.

When deciding whether to write a particular chunk into the new packfile, bup
first checks all the other packfiles that exist to see if they already have that
chunk.  If they do, the chunk is skipped.

git packs come in two parts: the pack itself (*.pack) and the index (*.idx).
The index is pretty small, and contains a list of all the objects in the
pack.  Thus, when generating a remote backup, we don't have to have a copy
of the packfiles from the remote server: the local end just downloads a copy
of the server's *index* files, and compares objects against those when
generating the new pack, which it sends directly to the server.

The "-n" option to 'bup split' and 'bup save' is the name of the backup you
want to create, but it's actually implemented as a git branch.  So you can
do cute things like checkout a particular branch using git, and receive a
bunch of chunk files corresponding to the file you split.

If you use '-b' or '-t' or '-c' instead of '-n', bup split will output a
list of blobs, a tree containing that list of blobs, or a commit containing
that tree, respectively, to stdout.  You can use this to construct your own
scripts that do something with those values.

The bup index:

'bup index' walks through your filesystem and updates a file (whose name is,
by default, ~/.bup/bupindex) to contain the name, attributes, and an
optional git SHA1 (blob id) of each file and directory.

'bup save' basically just runs the equivalent of 'bup split' a whole bunch
of times, once per file in the index, and assembles a git tree
that contains all the resulting objects.  Among other things, that makes
'git diff' much more useful (compared to splitting a tarball, which is
essentially a big binary blob).  However, since bup splits large files into
smaller chunks, the resulting tree structure doesn't *exactly* correspond to
what git itself would have stored.  Also, the tree format used by 'bup save'
will probably change in the future to support storing file ownership, more
complex file permissions, and so on.

If a file has previously been written by 'bup save', then its git blob/tree
id is stored in the index.  This lets 'bup save' avoid reading that file to
produce future incremental backups, which means it can go *very* fast unless
a lot of files have changed.

 
Things that are stupid for now but which we'll fix later
--------------------------------------------------------

Help with any of these problems, or others, is very welcome.  Join the
mailing list (see below) if you'd like to help.

 - 'bup save' and 'bup restore' have immature metadata support.
 
    On the plus side, they actually do have support now, but it's new,
    and not remotely as well tested as tar/rsync/whatever's.  If you'd
    like to help test, please do; something like 'rsync -niaHAX src/
    restore/' may be useful on that front.

    In addition, at the moment, if any strip or graft-style options
    are specified to 'bup save', then no metadata will be written for
    the root directory.  That's obviously less than ideal.

 - 'bup index' is slower than it should be.
 
    It's still rather fast: it can iterate through all the filenames on my
    600,000 file filesystem in a few seconds.  But it still needs to rewrite
    the entire index file just to add a single filename, which is pretty
    nasty; it should just leave the new files in a second "extra index" file
    or something.
   
 - bup could use inotify for *really* efficient incremental backups.

    You could even have your system doing "continuous" backups: whenever a
    file changes, we immediately send an image of it to the server.  We could
    give the continuous-backup process a really low CPU and I/O priority so
    you wouldn't even know it was running.

 - bup currently has no features that prune away *old* backups.
 
    Because of the way the packfile system works, backups become "entangled"
    in weird ways and it's not actually possible to delete one pack
    (corresponding approximately to one backup) without risking screwing up
    other backups.
   
    git itself has lots of ways of optimizing this sort of thing, but its
    methods aren't really applicable here; bup packfiles are just too huge.
    We'll have to do it in a totally different way.  There are lots of
    options.  For now: make sure you've got lots of disk space :)

 - bup has never been tested on anything but Linux, MacOS, and Windows+Cygwin.
 
    There's nothing that makes it *inherently* non-portable, though, so
    that's mostly a matter of someone putting in some effort.  (For a
    "native" Windows port, the most annoying thing is the absence of ssh in
    a default Windows installation.)
    
 - bup needs better documentation.
 
    According to a recent article about git in Linux Weekly News
    (https://lwn.net/Articles/380983/), "it's a bit short on examples and
    a user guide would be nice."  Documentation is the sort of thing that
    will never be great unless someone from outside contributes it (since
    the developers can never remember which parts are hard to understand).
    
 - bup is "relatively speedy" and has "pretty good" compression.
 
    ...according to the same LWN article.  Clearly neither of those is good
    enough.  We should have awe-inspiring speed and crazy-good compression. 
    Must work on that.  Writing more parts in C might help with the speed.
   
 - bup has no GUI.
 
    Actually, that's not stupid, but you might consider it a limitation. 
    There are a bunch of Linux GUI backup programs; someday I expect someone
    will adapt one of them to use bup.
    
    
More Documentation
------------------

bup has an extensive set of man pages.  Try using 'bup help' to get
started, or use 'bup help SUBCOMMAND' for any bup subcommand (like split,
join, index, save, etc.) to get details on that command.

For further technical details, please see ./DESIGN.


How you can help
================

bup is a work in progress and there are many ways it can still be improved.
If you'd like to contribute patches, ideas, or bug reports, please join the
bup mailing list.

You can find the mailing list archives here:

        http://groups.google.com/group/bup-list
        
and you can subscribe by sending a message to:

        bup-list+subscribe@googlegroups.com

Have fun,

Avery