#
# debian/rules for ngIRCd
#
-# $Id: rules,v 1.1 2003/12/31 17:20:11 alex Exp $
+# $Id: rules,v 1.3 2005/02/07 23:09:31 alex Exp $
#
# Based on the sample debian/rules that uses debhelper,
# GNU copyright 1997 to 1999 by Joey Hess.
INSTALL_PROGRAM += -s
endif
-config.status: configure
+configure-ngircd: configure
dh_testdir
-
- # Add here commands to configure the package.
+
+ # configure "standard" variant:
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
--prefix=/usr \
--sysconfdir=/etc/ngircd \
--mandir=\$${prefix}/share/man \
--with-syslog --with-zlib
-build: build-stamp
-
-build-stamp: config.status
+configure-ngircd-full: configure
dh_testdir
+
+ # configure "full" variant:
+ ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+ --prefix=/usr \
+ --sysconfdir=/etc/ngircd \
+ --mandir=\$${prefix}/share/man \
+ --with-syslog --with-zlib --with-tcp-wrappers --with-ident
+
+build:
+ dh_clean -k
- # Add here commands to compile the package.
+build-ngircd: build-stamp-ngircd
+build-stamp-ngircd: configure-ngircd
+ dh_testdir
+ rm -f build-stamp-*
+
+ # Add here commands to compile the "standard" package:
$(MAKE)
+
+ touch build-stamp-ngircd
- touch build-stamp
+build-ngircd-full: build-stamp-ngircd-full
+build-stamp-ngircd-full: configure-ngircd-full
+ dh_testdir
+ rm -f build-stamp-*
+
+ # Add here commands to compile the "full" package:
+ $(MAKE)
+
+ touch build-stamp-ngircd-full
clean:
dh_testdir
dh_testroot
- rm -f build-stamp
-
- # Add here commands to clean up after the build process.
- -$(MAKE) distclean
-
+ rm -f build-stamp*
+ rm -f $(CURDIR)/debian/ngircd-full.default
+ rm -f $(CURDIR)/debian/ngircd-full.init
+ rm -f $(CURDIR)/debian/ngircd-full.postinst
+
+ # Add here commands to clean up after the build process:
+ -$(MAKE) clean
+
ifneq "$(wildcard /usr/share/misc/config.sub)" ""
cp -f /usr/share/misc/config.sub config.sub
endif
endif
dh_clean
-install: build
+install: install-ngircd install-ngircd-full
+
+install-ngircd: build-ngircd
dh_testdir
dh_testroot
- dh_clean -k
dh_installdirs
-
- # Add here commands to install the package into debian/ngircd.
+
+ # Add here commands to install the "standard" package into debian/ngircd:
$(MAKE) install DESTDIR=$(CURDIR)/debian/ngircd
- rm -f $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/INSTALL*
- rm -f $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/COPYING*
+ rm $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/INSTALL*
+ rm $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/COPYING*
+ mkdir -p $(CURDIR)/debian/ngircd/var/run/ircd
+ cat $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/sample-ngircd.conf | \
+ sed -e "s/;ServerUID = 65534/ServerUID = irc/g" | \
+ sed -e "s/;ServerGID = 65534/ServerGID = irc/g" | \
+ sed -e "s/;MotdFile = \/usr\/local\/etc\/ngircd.motd/MotdFile = \/etc\/ngircd\/ngircd.motd/g" | \
+ sed -e "s/;PidFile = \/var\/run\/ngircd\/ngircd.pid/PidFile = \/var\/run\/ircd\/ngircd.pid/g" \
+ >$(CURDIR)/debian/ngircd/etc/ngircd/ngircd.conf
+ touch $(CURDIR)/debian/ngircd/etc/ngircd/ngircd.motd
+
+install-ngircd-full: build-ngircd-full
+ dh_testdir
+ dh_testroot
+ dh_installdirs
+
+ # Add here commands to install the "full" package into debian/ngircd-full:
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/ngircd-full
+ rm $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd/INSTALL*
+ rm $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd/COPYING*
+ mv $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd \
+ $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd-full
+ mkdir -p $(CURDIR)/debian/ngircd-full/var/run/ircd
+ cat $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd-full/sample-ngircd.conf | \
+ sed -e "s/;ServerUID = 65534/ServerUID = irc/g" | \
+ sed -e "s/;ServerGID = 65534/ServerGID = irc/g" | \
+ sed -e "s/;MotdFile = \/usr\/local\/etc\/ngircd.motd/MotdFile = \/etc\/ngircd\/ngircd.motd/g" | \
+ sed -e "s/;PidFile = \/var\/run\/ngircd\/ngircd.pid/PidFile = \/var\/run\/ircd\/ngircd.pid/g" \
+ >$(CURDIR)/debian/ngircd-full/etc/ngircd/ngircd.conf
+ touch $(CURDIR)/debian/ngircd-full/etc/ngircd/ngircd.motd
# Build architecture-independent files here.
-binary-indep: build install
+binary-indep:
# We have nothing to do by default.
# Build architecture-dependent files here.
binary-arch: build install
+ ln -s $(CURDIR)/debian/ngircd.default \
+ $(CURDIR)/debian/ngircd-full.default
+ ln -s $(CURDIR)/debian/ngircd.init \
+ $(CURDIR)/debian/ngircd-full.init
+ ln -s $(CURDIR)/debian/ngircd.postinst \
+ $(CURDIR)/debian/ngircd-full.postinst
+
dh_testdir
dh_testroot
- dh_installchangelogs ChangeLog
- dh_installdocs
- dh_installinit
- dh_strip
- dh_compress
- dh_fixperms
- dh_installdeb
- dh_shlibdeps
- dh_gencontrol
- dh_md5sums
- dh_builddeb
+ dh_installchangelogs -a -A ChangeLog
+ dh_installdocs -a
+ dh_installinit -a
+ dh_strip -a
+ dh_compress -a
+ dh_fixperms -a
+ dh_installdeb -a
+ dh_shlibdeps -a
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
binary: binary-indep binary-arch