#!/usr/bin/make -f
#
# ngIRCd -- The Next Generation IRC Daemon
-# Copyright (c)2001-2008 Alexander Barton <alex@barton.de>
+# Copyright (c)2001-2012 Alexander Barton (alex@barton.de) and Contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
configure-ngircd: configure
dh_testdir
-
+
# configure "standard" variant:
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
--prefix=/usr \
configure-ngircd-full: configure
dh_testdir
-
+
# configure "full" variant:
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
--prefix=/usr \
--sysconfdir=/etc/ngircd \
--mandir=\$${prefix}/share/man \
--with-syslog --with-zlib \
- --with-gnutls --with-ident --with-tcp-wrappers \
+ --with-gnutls --with-iconv --with-ident --with-tcp-wrappers \
+ --with-pam \
+ --enable-ipv6
+
+configure-ngircd-full-dbg: configure
+ dh_testdir
+
+ # configure "full debug" variant:
+ ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+ --prefix=/usr \
+ --sysconfdir=/etc/ngircd \
+ --mandir=\$${prefix}/share/man \
+ --enable-debug --enable-sniffer \
+ --with-syslog --with-zlib \
+ --with-gnutls --with-iconv --with-ident --with-tcp-wrappers \
+ --with-pam \
--enable-ipv6
build:
build-stamp-ngircd: configure-ngircd
dh_testdir
rm -f build-stamp-*
-
+
# Add here commands to compile the "standard" package:
$(MAKE)
-
+
touch build-stamp-ngircd
build-ngircd-full: build-stamp-ngircd-full
build-stamp-ngircd-full: configure-ngircd-full
dh_testdir
rm -f build-stamp-*
-
+
# Add here commands to compile the "full" package:
$(MAKE)
-
+
+ touch build-stamp-ngircd-full
+
+build-ngircd-full-dbg: build-stamp-ngircd-full-dbg
+build-stamp-ngircd-full-dbg: configure-ngircd-full-dbg
+ dh_testdir
+ rm -f build-stamp-*
+
+ # Add here commands to compile the "full debug" package:
+ $(MAKE)
+
touch build-stamp-ngircd-full
clean:
rm -f $(CURDIR)/debian/ngircd-full.default
rm -f $(CURDIR)/debian/ngircd-full.init
rm -f $(CURDIR)/debian/ngircd-full.postinst
-
+ rm -f $(CURDIR)/debian/ngircd-full-dbg.default
+ rm -f $(CURDIR)/debian/ngircd-full-dbg.postinst
+ rm -f $(CURDIR)/debian/ngircd-full-dbg.init
+
# Add here commands to clean up after the build process:
- -$(MAKE) clean
-
+ [ ! -f Makefile ] || $(MAKE) distclean
+
ifneq "$(wildcard /usr/share/misc/config.sub)" ""
cp -f /usr/share/misc/config.sub config.sub
endif
endif
dh_clean
-install: install-ngircd install-ngircd-full
+install: install-ngircd install-ngircd-full install-ngircd-full-dbg
install-ngircd: build-ngircd
dh_testdir
dh_testroot
dh_installdirs
-
+
# Add here commands to install the "standard" package into debian/ngircd:
$(MAKE) install DESTDIR=$(CURDIR)/debian/ngircd
rm $(CURDIR)/debian/ngircd/usr/share/doc/ngircd/INSTALL*
dh_testdir
dh_testroot
dh_installdirs
-
+
# Add here commands to install the "full" package into debian/ngircd-full:
$(MAKE) install DESTDIR=$(CURDIR)/debian/ngircd-full
rm $(CURDIR)/debian/ngircd-full/usr/share/doc/ngircd/INSTALL*
sed -e "s/;PidFile = \/var\/run\/ngircd\/ngircd.pid/PidFile = \/var\/run\/ircd\/ngircd.pid/g" \
>$(CURDIR)/debian/ngircd-full/etc/ngircd/ngircd.conf
touch $(CURDIR)/debian/ngircd-full/etc/ngircd/ngircd.motd
+ mkdir -p $(CURDIR)/debian/ngircd-full/etc/pam.d
+ cp $(CURDIR)/debian/ngircd.pam $(CURDIR)/debian/ngircd-full/etc/pam.d/ngircd
+
+install-ngircd-full-dbg: build-ngircd-full-dbg
+ dh_testdir
+ dh_testroot
+ dh_installdirs
+
+ # Add here commands to install the "full" package into debian/ngircd-full:
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/ngircd-full-dbg
+ rm $(CURDIR)/debian/ngircd-full-dbg/usr/share/doc/ngircd/INSTALL*
+ rm $(CURDIR)/debian/ngircd-full-dbg/usr/share/doc/ngircd/COPYING*
+ mv $(CURDIR)/debian/ngircd-full-dbg/usr/share/doc/ngircd \
+ $(CURDIR)/debian/ngircd-full-dbg/usr/share/doc/ngircd-full-dbg
+ mkdir -p $(CURDIR)/debian/ngircd-full-dbg/var/run/ircd
+ cat $(CURDIR)/debian/ngircd-full-dbg/usr/share/doc/ngircd-full-dbg/sample-ngircd.conf | \
+ sed -e "s/;ServerUID = 65534/ServerUID = irc/g" | \
+ sed -e "s/;ServerGID = 65534/ServerGID = irc/g" | \
+ sed -e "s/;MotdFile = \/usr\/local\/etc\/ngircd.motd/MotdFile = \/etc\/ngircd\/ngircd.motd/g" | \
+ sed -e "s/;PidFile = \/var\/run\/ngircd\/ngircd.pid/PidFile = \/var\/run\/ircd\/ngircd.pid/g" \
+ >$(CURDIR)/debian/ngircd-full-dbg/etc/ngircd/ngircd.conf
+ touch $(CURDIR)/debian/ngircd-full-dbg/etc/ngircd/ngircd.motd
+ mkdir -p $(CURDIR)/debian/ngircd-full-dbg/etc/pam.d
+ cp $(CURDIR)/debian/ngircd.pam $(CURDIR)/debian/ngircd-full-dbg/etc/pam.d/ngircd
# Build architecture-independent files here.
binary-indep:
$(CURDIR)/debian/ngircd-full.init
ln -s $(CURDIR)/debian/ngircd.postinst \
$(CURDIR)/debian/ngircd-full.postinst
-
+
+ ln -s $(CURDIR)/debian/ngircd.default \
+ $(CURDIR)/debian/ngircd-full-dbg.default
+ ln -s $(CURDIR)/debian/ngircd.init \
+ $(CURDIR)/debian/ngircd-full-dbg.init
+ ln -s $(CURDIR)/debian/ngircd.postinst \
+ $(CURDIR)/debian/ngircd-full-dbg.postinst
+
dh_testdir
dh_testroot
dh_installchangelogs -a -A ChangeLog
dh_installdocs -a
dh_installinit -a
- dh_strip -a
- dh_compress -a
+ dh_strip -a --no-package=ngircd-full-dbg
+ dh_compress -a -XCommands.txt
dh_fixperms -a
dh_installdeb -a
dh_shlibdeps -a