# Disclaimer
-**Python support is experimental and implementation may change in the future**
-
Every module should be compatible with python2 and python3.
All third party libraries should be installed system-wide or in `python_modules` directory.
Module configurations are written in YAML and **pyYAML is required**.
---
+# cpufreq
+
+Module shows current cpu frequency by looking at appropriate files in /sys/devices
+
+**Requirement:**
+Processor which presents data scaling frequency data
+
+It produces one chart with multiple lines (one line per core).
+
+### configuration
+
+Sample:
+
+```yaml
+sys_dir: "/sys/devices"
+```
+
+If no configuration is given, module will search for `scaling_cur_freq` files in `/sys/devices` directory.
+Directory is also prefixed with `NETDATA_HOST_PREFIX` if specified.
+
+---
+
+# dovecot
+
+This module provides statistics information from dovecot server.
+Statistics are taken from dovecot socket by executing `EXPORT global` command.
+More information about dovecot stats can be found on [project wiki page.](http://wiki2.dovecot.org/Statistics)
+
+**Requirement:**
+Dovecot unix socket with R/W permissions for user netdata or dovecot with configured TCP/IP socket.
+
+Module gives information with following charts:
+
+1. **logins and sessions**
+ * logins
+ * active sessions
+
+2. **commands** - number of IMAP commands
+ * commands
+
+3. **Faults**
+ * minor
+ * major
+
+4. **Context Switches**
+ * volountary
+ * involountary
+
+5. **disk** in bytes/s
+ * read
+ * write
+
+6. **bytes** in bytes/s
+ * read
+ * write
+
+7. **number of syscalls** in syscalls/s
+ * read
+ * write
+
+8. **lookups** - number of lookups per second
+ * path
+ * attr
+
+9. **hits** - number of cache hits
+ * hits
+
+10. **attempts** - authorization attemts
+ * success
+ * failure
+
+11. **cache** - cached authorization hits
+ * hit
+ * miss
+
+### configuration
+
+Sample:
+
+```yaml
+localtcpip:
+ name : 'local'
+ host : '127.0.0.1'
+ port : 24242
+
+localsocket:
+ name : 'local'
+ socket : '/var/run/dovecot/stats'
+```
+
+If no configuration is given, module will attempt to connect to dovecot using unix socket localized in `/var/run/dovecot/stats`
+
+---
+
+# exim
+
+Simple module executing `exim -bpc` to grab exim queue.
+This command can take a lot of time to finish its execution thus it is not recommended to run it every second.
+
+It produces only one chart:
+
+1. **Exim Queue Emails**
+ * emails
+
+Configuration is not needed.
+
+---
+
# hddtemp
Module monitors disk temperatures from one or more hddtemp daemons
---
+# IPFS
+
+Module monitors [IPFS](https://ipfs.io) basic information.
+
+1. **Bandwidth** in kbits/s
+ * in
+ * out
+
+2. **Peers**
+ * peers
+
+### configuration
+
+Only url to IPFS server is needed.
+
+Sample:
+
+```yaml
+localhost:
+ name : 'local'
+ url : 'http://localhost:5001'
+```
+
+---
+
+# memcached
+
+Memcached monitoring module. Data grabbed from [stats interface](https://github.com/memcached/memcached/wiki/Commands#stats).
+
+1. **Network** in kilobytes/s
+ * read
+ * written
+
+2. **Connections** per second
+ * current
+ * rejected
+ * total
+
+3. **Items** in cluster
+ * current
+ * total
+
+4. **Evicted and Reclaimed** items
+ * evicted
+ * reclaimed
+
+5. **GET** requests/s
+ * hits
+ * misses
+
+6. **GET rate** rate in requests/s
+ * rate
+
+7. **SET rate** rate in requests/s
+ * rate
+
+8. **DELETE** requests/s
+ * hits
+ * misses
+
+9. **CAS** requests/s
+ * hits
+ * misses
+ * bad value
+
+10. **Increment** requests/s
+ * hits
+ * misses
+
+11. **Decrement** requests/s
+ * hits
+ * misses
+
+12. **Touch** requests/s
+ * hits
+ * misses
+
+13. **Touch rate** rate in requests/s
+ * rate
+
+### configuration
+
+Sample:
+
+```yaml
+localtcpip:
+ name : 'local'
+ host : '127.0.0.1'
+ port : 24242
+```
+
+If no configuration is given, module will attempt to connect to memcached instance on `127.0.0.1:11211` address.
+
+---
+
# mysql
Module monitors one or more mysql servers
---
+# nginx_log
+
+Module monitors nginx access log and produces only one chart:
+
+1. **nginx status codes** in requests/s
+ * 2xx
+ * 3xx
+ * 4xx
+ * 5xx
+
+### configuration
+
+Sample for two vhosts:
+
+```yaml
+site_A:
+ path: '/var/log/nginx/access-A.log'
+
+site_B:
+ name: 'local'
+ path: '/var/log/nginx/access-B.log'
+```
+
+When no configuration file is found, module tries to parse `/var/log/nginx/access.log` file.
+
+---
+
# phpfpm
This module will monitor one or more php-fpm instances depending on configuration.
---
+# postfix
+
+Simple module executing `postfix -p` to grab postfix queue.
+
+It produces only two charts:
+
+1. **Postfix Queue Emails**
+ * emails
+
+2. **Postfix Queue Emails Size** in KB
+ * size
+
+Configuration is not needed.
+
+---
+
+# redis
+
+Get INFO data from redis instance.
+
+Following charts are drawn:
+
+1. **Operations** per second
+ * operations
+
+2. **Hit rate** in percent
+ * rate
+
+3. **Memory utilization** in kilobytes
+ * total
+ * lua
+
+4. **Database keys**
+ * lines are creates dynamically based on how many databases are there
+
+5. **Clients**
+ * connected
+ * blocked
+
+6. **Slaves**
+ * connected
+
+### configuration
+
+```yaml
+socket:
+ name : 'local'
+ socket : '/var/lib/redis/redis.sock'
+
+localhost:
+ name : 'local'
+ host : 'localhost'
+ port : 6379
+```
+
+When no configuration file is found, module tries to connect to TCP/IP socket: `localhost:6379`.
+
+---
+
+# sensors
+
+System sensors information.
+
+Charts are created dynamically.
+
+### configuration
+
+For detailed configuration information please read [`sensors.conf`](https://github.com/firehol/netdata/blob/master/conf.d/python.d/sensors.conf) file.
+
+---
+
# squid
This module will monitor one or more squid instances depending on configuration.
Without any configuration module will try to autodetect where squid presents its `counters` data
+---
+
+# tomcat
+
+Present tomcat containers memory utilization.
+
+Charts:
+
+1. **Requests** per second
+ * accesses
+
+2. **Volume** in KB/s
+ * volume
+
+3. **Threads**
+ * current
+ * busy
+
+4. **JVM Free Memory** in MB
+ * jvm
+
+### configuration
+
+```yaml
+localhost:
+ name : 'local'
+ url : 'http://127.0.0.1:8080/manager/status?XML=true'
+ user : 'tomcat_username'
+ pass : 'secret_tomcat_password'
+```
+
+Without configuration, module attempts to connect to `http://localhost:8080/manager/status?XML=true`, without any credentials.
+So it will probably fail.
+
---
\ No newline at end of file
'codes': {
'options': [None, 'nginx status codes', 'requests/s', 'requests', 'nginx_log.codes', 'stacked'],
'lines': [
- ["20X", None, "incremental"],
- ["30X", None, "incremental"],
- ["40X", None, "incremental"],
- ["50X", None, "incremental"]
+ ["2xx", None, "incremental"],
+ ["3xx", None, "incremental"],
+ ["4xx", None, "incremental"],
+ ["5xx", None, "incremental"]
]}
}
Parse new log lines
:return: dict
"""
- data = {'20X': 0,
- '30X': 0,
- '40X': 0,
- '50X': 0}
+ data = {'2xx': 0,
+ '3xx': 0,
+ '4xx': 0,
+ '5xx': 0}
try:
raw = self._get_raw_data()
if raw is None:
beginning = code.group(1)[0]
if beginning == '2':
- data["20X"] += 1
+ data["2xx"] += 1
elif beginning == '3':
- data["30X"] += 1
+ data["3xx"] += 1
elif beginning == '4':
- data["40X"] += 1
+ data["4xx"] += 1
elif beginning == '5':
- data["50X"] += 1
+ data["5xx"] += 1
return data
CHARTS = {
'accesses': {
- 'options': [None, "tomcat requests", "requests/s", "statistics", "tomcat.accesses", "area"],
+ 'options': [None, "Requests", "requests/s", "statistics", "tomcat.accesses", "area"],
'lines': [
["accesses", None, 'incremental']
]},
'volume': {
- 'options': [None, "tomcat volume", "KB/s", "volume", "tomcat.volume", "area"],
+ 'options': [None, "Volume", "KB/s", "volume", "tomcat.volume", "area"],
'lines': [
["volume", None, 'incremental', 1, 1024]
]},
'threads': {
- 'options': [None, "tomcat threads", "current threads", "statistics", "tomcat.threads", "line"],
+ 'options': [None, "Threads", "current threads", "statistics", "tomcat.threads", "line"],
'lines': [
["current", None, "absolute"],
["busy", None, "absolute"]
projects / netdata.git / commitdiff