2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
13 ngIRCd 0.12.0-pre1 (2008-04-20)
16 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
17 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
18 enhanced test suite to check these commands. (Dana Dahlstrom)
19 - IRC_WHO now supports search patterns and will test this against user
20 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
21 (reported by Dana Dahlstrom)
22 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
23 as if the user had sent PART commands for all channels the user is a
24 member of. (Dana Dahlstrom)
25 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
27 ngIRCd 0.11.0 (2008-01-15)
29 - Add support for /STAT u (server uptime) command.
30 - New [Server] configuration Option "Bind" allows to specify
31 the source ip adress to use when connecting to remote server.
32 - New configuration option "MaxNickLength" to specify the allowed maximum
33 length of user nick names. Note: must be unique in an IRC network!
34 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
35 - Added new server configuration option "Passive" for "Server" blocks to
36 disable automatic outgoing connections (similar to -p option to ngircd,
37 but only for the specified server). (Tassilo Schweyer)
38 - Added support for the WALLOPS command. Usage is restricted to IRC
41 ngIRCd 0.10.2 (2007-06-08)
43 - Predefined channel configuration now allows specification of channel key
44 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
45 - When using the epoll() IO interface, compile in the select() interface as
46 well and fall back to it when epoll() isn't available on runtime.
47 - Added support for IO APIs "poll()" and "/dev/poll".
49 ngIRCd 0.10.1 (2006-12-17)
51 - Allow PASS syntax defined in RFC 1459 for server links, too.
52 - New configuration option "PredefChannelsOnly": if set, clients can only
53 join predefined channels.
55 ngIRCd 0.10.0 (2006-10-01)
57 ngIRCd 0.10.0-pre1 (2006-08-02)
58 - Enhanced DIE to accept a single parameter ("comment text") which is sent
59 to all locally connected clients before the server goes down.
60 - JOIN now supports more than one channel key at a time.
61 - Implemented numeric "333": Time and user name who set a channel topic.
62 - Channel topics are no longer limited to 127 characters: now the only limit
63 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
64 limits the topic to about 490 characters due to protocol overhead).
65 - Reverse DNS lookup code now checks the result by doing an additional
66 lookup to prevent spoofing.
67 - Added new IO layer which (optionally) supports epoll() and kqueue() in
68 addition to the select() interface.
70 ngIRCd 0.9.0 (2005-07-24)
72 - Never run with root privileges but always switch the user ID.
73 - Make "netsplit" messages RFC compliant.
74 - Implemented the IRC function "WHOWAS".
75 - New configuration option "OperServerMode" to enable a workaround needed
76 when running an network with ircd2 servers and "OperCanUseMode" enabled
77 to prevent the ircd2 daemon to drop mode changes of IRC operators.
78 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
79 - Implemented support for "secret channels" (channel mode "s").
80 - New configuration option "Mask" for [Operator] sections to limit OPER
81 commands to users with a specific IRC mask. Patch from Florian Westphal.
82 - New configuration variable "PidFile", section "[Global]": if defined,
83 the server writes its process ID (PID) to this file. Default: off.
84 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
85 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
86 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
87 API will be autodetected when you call "./configure --with-rendezvous".
89 ngIRCd 0.8.0 (2004-06-26)
91 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
92 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
93 its root and working directory to something "safe". MotdPhrase is used
94 to define an "MOTD string" instead of a whole file, useful if the
95 "real" MOTD file would be outside the "jail".
96 - INVITE- and BAN-lists become synchronized between IRC+ servers when
97 establishing new connections, if the peer supports this as well.
98 - The type of service (TOS) of all sockets is set to "interactive" now.
99 - Added short command line option "-t" as alternative to "--configtest".
100 - Added optional support for "IDENT" lookups on incoming connections. You
101 have to enable this function with the ./configure switch "--with-ident".
102 The default is not to do IDENT lookups.
104 ngIRCd 0.7.5 (2003-07-11)
106 - New configuration variable "MaxConnectionsIP" to limit the number of
107 simultaneous connections from a single IP that the server will accept.
108 This configuration options lowers the risk of denial of service attacks
109 (DoS), the default is 5 connections per client IP.
110 - Added new configuration variable "Listen" to bind all listening
111 sockets of the server to a single IP address.
113 ngIRCd 0.7.1 (2003-07-18)
115 - Added support for GNU/Hurd.
117 ngIRCd 0.7.0 (2003-05-01)
119 - New command CONNECT to enable and add server links. The syntax is not
120 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
121 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
122 to add a new server (ngIRCd tries to connect new servers only once!).
123 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
124 - New command TRACE (you can trace only servers at the moment).
125 - New command HELP that lists all understood commands.
126 - ngIRCd can register itself with Rendezvous: to enable support pass the
127 new switch "--with-rendezvous" to configure.
128 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
129 configure to enable it.
130 - Changed some configure options to use "--with"/"--without" as prefix
131 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
132 "--with-tcp-wrappers", and "--with-rendezvous".
133 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
134 - Documentation is now installed in $(datadir)/doc/ngircd.
137 Older news (sorry, only available in german language):
139 ngIRCd 0.6.0, 2002-12-24
141 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
142 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
143 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
144 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
145 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
146 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
147 Der Default ist -1, "unlimitiert".
148 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
149 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
150 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
151 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
152 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
153 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
154 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
155 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
156 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
157 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
158 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
159 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
160 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
161 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
162 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
163 miteinander ueber komprimiert Links kommunizieren.
164 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
165 der Channels, in denen ein User Mitglied sein kann, begrent werden.
166 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
168 ngIRCd 0.5.0, 20.09.2002
170 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
171 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
172 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
173 dem "nativen" (ggf. pre-ANSI) Compiler.
174 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
175 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
176 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
177 wenn kein User mehr im Channel ist.
178 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
179 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
180 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
181 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
182 "AdminInfo2" und "AdminEMail".
183 - Invite- und Ban-Lists implementiert.
184 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
185 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
186 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
188 ngIRCd 0.4.2, 29.04.2002
190 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
191 Regular Expressions (bis auf "*") unterstuetzt.
193 ngIRCd 0.4.0, 01.04.2002
195 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
196 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
197 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
198 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
199 zusaetzliche Informationen.
200 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
201 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
202 nicht, so wird der naechste probiert.
203 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
204 einen Hash-Wert gesucht: sollte deutlich schneller sein.
205 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
206 gelesen und die dann verwendeten Werte angezeigt.
207 - Client-Mode "s" (Server Notices) implementiert.
208 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
209 alternative Konfigurationsdatei angegeben werden.
210 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
211 zu einer anderen User-ID und Group-ID wechseln.
213 ngIRCd 0.3.0, 02.03.2002
215 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
216 er auf den IRC-Befehl RESTART reagiert.
217 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
218 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
219 Zum Debuggen manchmal ganz praktisch :-)
220 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
221 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
222 - AWAY (und der User-Mode 'a') ist nun implementiert.
223 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
224 - Channel- und Nicknames werden nun ordentlich validiert.
226 ngIRCd 0.2.0, 15.02.2002
228 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
229 Server versteht an User-Modes o und v, beachtet letzteres allerdings
230 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
231 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
232 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
233 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
235 ngIRCd 0.1.0, 29.01.2002
237 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
238 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
239 Chatten in Channels ist aber natuerlich moeglich ;-)
240 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
241 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
242 - FAQ.txt in doc/ begonnen.
244 ngIRCd 0.0.3, 16.01.2002
246 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
247 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
248 IRC-Netzwerk arbeiten.
249 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
250 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
251 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
252 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
253 - neue Befehle: LUSERS, LINKS.
255 ngIRCd 0.0.2, 06.01.2002
257 - neuer Aufbau der Konfigurationsdatei,
258 - mehrere IRC-Operatoren koennen konfiguriert werden,
259 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
260 nur "leafed server" sein, d.h. keine "Client-Server" haben.
262 ngIRCd 0.0.1, 31.12.2001
264 - erste oeffentliche Version von ngIRCd als "public preview" :-)
268 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $