2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
13 ngIRCd 0.12.0-pre2 (2008-04-29)
15 - IPv6: Add config options to disabe ipv4/ipv6 support.
17 ngIRCd 0.12.0-pre1 (2008-04-20)
19 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
20 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
21 enhanced test suite to check these commands. (Dana Dahlstrom)
22 - IRC_WHO now supports search patterns and will test this against user
23 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
24 (reported by Dana Dahlstrom)
25 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
26 as if the user had sent PART commands for all channels the user is a
27 member of. (Dana Dahlstrom)
28 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
30 ngIRCd 0.11.0 (2008-01-15)
32 - Add support for /STAT u (server uptime) command.
33 - New [Server] configuration Option "Bind" allows to specify
34 the source ip adress to use when connecting to remote server.
35 - New configuration option "MaxNickLength" to specify the allowed maximum
36 length of user nick names. Note: must be unique in an IRC network!
37 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
38 - Added new server configuration option "Passive" for "Server" blocks to
39 disable automatic outgoing connections (similar to -p option to ngircd,
40 but only for the specified server). (Tassilo Schweyer)
41 - Added support for the WALLOPS command. Usage is restricted to IRC
44 ngIRCd 0.10.2 (2007-06-08)
46 - Predefined channel configuration now allows specification of channel key
47 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
48 - When using the epoll() IO interface, compile in the select() interface as
49 well and fall back to it when epoll() isn't available on runtime.
50 - Added support for IO APIs "poll()" and "/dev/poll".
52 ngIRCd 0.10.1 (2006-12-17)
54 - Allow PASS syntax defined in RFC 1459 for server links, too.
55 - New configuration option "PredefChannelsOnly": if set, clients can only
56 join predefined channels.
58 ngIRCd 0.10.0 (2006-10-01)
60 ngIRCd 0.10.0-pre1 (2006-08-02)
61 - Enhanced DIE to accept a single parameter ("comment text") which is sent
62 to all locally connected clients before the server goes down.
63 - JOIN now supports more than one channel key at a time.
64 - Implemented numeric "333": Time and user name who set a channel topic.
65 - Channel topics are no longer limited to 127 characters: now the only limit
66 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
67 limits the topic to about 490 characters due to protocol overhead).
68 - Reverse DNS lookup code now checks the result by doing an additional
69 lookup to prevent spoofing.
70 - Added new IO layer which (optionally) supports epoll() and kqueue() in
71 addition to the select() interface.
73 ngIRCd 0.9.0 (2005-07-24)
75 - Never run with root privileges but always switch the user ID.
76 - Make "netsplit" messages RFC compliant.
77 - Implemented the IRC function "WHOWAS".
78 - New configuration option "OperServerMode" to enable a workaround needed
79 when running an network with ircd2 servers and "OperCanUseMode" enabled
80 to prevent the ircd2 daemon to drop mode changes of IRC operators.
81 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
82 - Implemented support for "secret channels" (channel mode "s").
83 - New configuration option "Mask" for [Operator] sections to limit OPER
84 commands to users with a specific IRC mask. Patch from Florian Westphal.
85 - New configuration variable "PidFile", section "[Global]": if defined,
86 the server writes its process ID (PID) to this file. Default: off.
87 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
88 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
89 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
90 API will be autodetected when you call "./configure --with-rendezvous".
92 ngIRCd 0.8.0 (2004-06-26)
94 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
95 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
96 its root and working directory to something "safe". MotdPhrase is used
97 to define an "MOTD string" instead of a whole file, useful if the
98 "real" MOTD file would be outside the "jail".
99 - INVITE- and BAN-lists become synchronized between IRC+ servers when
100 establishing new connections, if the peer supports this as well.
101 - The type of service (TOS) of all sockets is set to "interactive" now.
102 - Added short command line option "-t" as alternative to "--configtest".
103 - Added optional support for "IDENT" lookups on incoming connections. You
104 have to enable this function with the ./configure switch "--with-ident".
105 The default is not to do IDENT lookups.
107 ngIRCd 0.7.5 (2003-07-11)
109 - New configuration variable "MaxConnectionsIP" to limit the number of
110 simultaneous connections from a single IP that the server will accept.
111 This configuration options lowers the risk of denial of service attacks
112 (DoS), the default is 5 connections per client IP.
113 - Added new configuration variable "Listen" to bind all listening
114 sockets of the server to a single IP address.
116 ngIRCd 0.7.1 (2003-07-18)
118 - Added support for GNU/Hurd.
120 ngIRCd 0.7.0 (2003-05-01)
122 - New command CONNECT to enable and add server links. The syntax is not
123 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
124 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
125 to add a new server (ngIRCd tries to connect new servers only once!).
126 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
127 - New command TRACE (you can trace only servers at the moment).
128 - New command HELP that lists all understood commands.
129 - ngIRCd can register itself with Rendezvous: to enable support pass the
130 new switch "--with-rendezvous" to configure.
131 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
132 configure to enable it.
133 - Changed some configure options to use "--with"/"--without" as prefix
134 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
135 "--with-tcp-wrappers", and "--with-rendezvous".
136 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
137 - Documentation is now installed in $(datadir)/doc/ngircd.
140 Older news (sorry, only available in german language):
142 ngIRCd 0.6.0, 2002-12-24
144 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
145 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
146 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
147 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
148 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
149 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
150 Der Default ist -1, "unlimitiert".
151 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
152 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
153 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
154 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
155 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
156 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
157 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
158 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
159 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
160 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
161 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
162 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
163 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
164 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
165 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
166 miteinander ueber komprimiert Links kommunizieren.
167 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
168 der Channels, in denen ein User Mitglied sein kann, begrent werden.
169 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
171 ngIRCd 0.5.0, 20.09.2002
173 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
174 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
175 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
176 dem "nativen" (ggf. pre-ANSI) Compiler.
177 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
178 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
179 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
180 wenn kein User mehr im Channel ist.
181 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
182 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
183 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
184 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
185 "AdminInfo2" und "AdminEMail".
186 - Invite- und Ban-Lists implementiert.
187 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
188 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
189 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
191 ngIRCd 0.4.2, 29.04.2002
193 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
194 Regular Expressions (bis auf "*") unterstuetzt.
196 ngIRCd 0.4.0, 01.04.2002
198 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
199 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
200 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
201 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
202 zusaetzliche Informationen.
203 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
204 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
205 nicht, so wird der naechste probiert.
206 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
207 einen Hash-Wert gesucht: sollte deutlich schneller sein.
208 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
209 gelesen und die dann verwendeten Werte angezeigt.
210 - Client-Mode "s" (Server Notices) implementiert.
211 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
212 alternative Konfigurationsdatei angegeben werden.
213 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
214 zu einer anderen User-ID und Group-ID wechseln.
216 ngIRCd 0.3.0, 02.03.2002
218 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
219 er auf den IRC-Befehl RESTART reagiert.
220 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
221 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
222 Zum Debuggen manchmal ganz praktisch :-)
223 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
224 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
225 - AWAY (und der User-Mode 'a') ist nun implementiert.
226 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
227 - Channel- und Nicknames werden nun ordentlich validiert.
229 ngIRCd 0.2.0, 15.02.2002
231 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
232 Server versteht an User-Modes o und v, beachtet letzteres allerdings
233 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
234 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
235 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
236 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
238 ngIRCd 0.1.0, 29.01.2002
240 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
241 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
242 Chatten in Channels ist aber natuerlich moeglich ;-)
243 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
244 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
245 - FAQ.txt in doc/ begonnen.
247 ngIRCd 0.0.3, 16.01.2002
249 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
250 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
251 IRC-Netzwerk arbeiten.
252 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
253 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
254 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
255 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
256 - neue Befehle: LUSERS, LINKS.
258 ngIRCd 0.0.2, 06.01.2002
260 - neuer Aufbau der Konfigurationsdatei,
261 - mehrere IRC-Operatoren koennen konfiguriert werden,
262 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
263 nur "leafed server" sein, d.h. keine "Client-Server" haben.
265 ngIRCd 0.0.1, 31.12.2001
267 - erste oeffentliche Version von ngIRCd als "public preview" :-)
271 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $