# AX-ZSH: Alex' Modular ZSH Configuration
-# Copyright (c) 2015 Alexander Barton <alex@barton.de>
+# Copyright (c) 2015-2020 Alexander Barton <alex@barton.de>
-script_name="$(basename -- "${(%):-%N}")"
+script_name="${${(%):-%N}:t}"
script_type="$script_name[2,-1]"
-[[ -f "$HOME/.axzsh.debug" ]] && echo "» $script_name:"
+# Handle "initialization stage", load all plugins of that stage, either from an
+# existing cache file or individually, optionally creating the cache.
+# - $1: Script name
+# - $2: Stage name (ax-io, zprofile, zshrc, zlogin, zlogout)
+function axzsh_handle_stage {
+ local name="$1"
+ local type="$2"
+
+ [[ -n "$AXZSH_DEBUG" ]] && echo "» $name ($type):"
+
+ # Look for some 3rd-party integrations ...
+
+ # --- Powerlevel10k ---
+ # Read in Powerlevel10k configuration file, if not already read:
+ [[ -z "$POWERLEVEL9K_CONFIG_FILE" && -r ~/.p10k.zsh ]] && source ~/.p10k.zsh
+ # Enable instant prompt. Should stay close to the top of ~/.zshrc.
+ # Initialization code that may require console input (password prompts,
+ # [y/n] confirmations, etc.) must be executed before this, so all ax-zsh
+ # plugings should do output in their "ax-io" stage only!
+ if [[ "$type" == "zprofile" ]]; then
+ p10k_instant_prompt="${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+ [[ -r "$p10k_instant_prompt" ]] && source "$p10k_instant_prompt"
+ fi
+
+ # Initialize cache
+ [[ -d "$AXZSH/cache" ]] || mkdir -p "$AXZSH/cache"
+ local cache_file="$AXZSH/cache/$type.cache"
+
+ local cat_cmd=${commands[cat]:-cat}
+
+ if [[ -r "$cache_file" ]]; then
+ # Cache file exists, use it!
+ # But when in the "zshrc" stage, make sure that the "zprofile" stage
+ # has already been handled (this uses the "01_zprofile" plugin which
+ # is used in the "zshrc.cache" as well, but can't be used successfully
+ # there because it becomes sourced inside of a ZSH function; so we have
+ # to source it here in the global context manually ...):
+ [[ -z "$AXZSH_ZPROFILE_READ" && "$type" = "zshrc" ]] \
+ && source "$AXZSH/core/01_zprofile/01_zprofile.zshrc"
+ [[ -n "$AXZSH_DEBUG" ]] \
+ && echo " - Reading cache file \"$cache_file\" ..."
+ source "$cache_file"
+ unfunction ax_plugin_init
+ else
+ # No cache file available.
+ local new_cache_file="$cache_file.NEW"
+
+ # Setup list of plugins to load:
+ local plugin_list
+ typeset -U plugin_list
+ plugin_list=(
+ "$AXZSH/core/"[0-5]*
+ "$AXZSH/active_plugins/"*(N)
+ "$AXZSH/core/"[6-9]*
+ )
+
+ # Create new cache file:
+ if [[ -n "$cache_file" && -w "$new_cache_file" ]]; then
+ [[ -n "$AXZSH_DEBUG" ]] \
+ && echo " (Writing new cache file to \"$new_cache_file\" ...)"
+ if ! printf "# %s\n\n" "$(LC_ALL=C date)" >"$new_cache_file"; then
+ unset new_cache_file
+ fi
+ fi
+
+ # Read in all the plugins for the current "type":
+ for plugin ($plugin_list); do
+ # Read the "theme file", if any and in "zshrc" stage.
+ # This must be done before 99_cleanup is run!
+ if [[ "$plugin:t" == "99_cleanup" && "$type" = "zshrc" ]]; then
+ if [[ -r "$AXZSH_THEME" ]]; then
+ source "$AXZSH_THEME"
+ if [[ -n "$new_cache_file" ]]; then
+ # Source the theme in the new cache file:
+ echo "# BEGIN Theme" >>"$new_cache_file"
+ echo 'source "$AXZSH_THEME"' >>"$new_cache_file"
+ echo "# END Theme" >>"$new_cache_file"
+ fi
+ fi
+ fi
+ axzsh_load_plugin "$plugin" "$type" "$new_cache_file"
+ done
+
+ if [[ -n "$cache_file" && -n "$new_cache_file" && -r "$new_cache_file" ]]; then
+ # Move newly created cache file in place:
+ mv "$new_cache_file" "$cache_file"
+ fi
+ fi
+}
# Load plugin code of a given type.
# - $1: plugin name
# - $2: plugin type (optional; defaults to "zshrc")
+# - $3: cache file (optional)
function axzsh_load_plugin {
- plugin="$1"
- [[ -z "$2" ]] && type="zshrc" || type="$2"
-
- for dname (
- "$AXZSH_PLUGIN_D/$plugin"
- "$ZSH_CUSTOM/$plugin"
- "$AXZSH/plugins/$plugin"
- "$AXZSH/core/$plugin"
- ); do
- [[ ! -d "$dname" ]] && continue
-
- fname="$dname/$plugin.$type"
- if [[ ! -r "$fname" && "$type" == "zshrc" ]]; then
- if [[ -r "$dname/$plugin.plugin.zsh" ]]; then
- # Oh My ZSH plugin
- type="plugin.zsh"
- fname="$dname/$plugin.plugin.zsh"
- elif [[ -r "$dname/init.zsh" ]]; then
- # Prezto module
- type="init.zsh"
- fname="$dname/init.zsh"
- fi
+ local dname="$1:A"
+ local plugin="$dname:t"
+ [[ -z "$2" ]] && local type="zshrc" || local type="$2"
+ local fname="$dname/$plugin.$type"
+ local cache_file="$3"
+
+ # Strip repository prefix (like "alexbarton#test-plugin"):
+ [[ "$plugin" =~ "#" ]] && plugin=$(echo $plugin | cut -d'#' -f2-)
+
+ # "short plugin name": strip ".zsh" suffix:
+ plugin_short=${plugin%.zsh}
+
+ if [[ ! -d "$dname" ]]; then
+ # Plugin not found!
+ if [[ -n "$AXZSH_DEBUG" ]]; then
+ # Show error message for all stages in "debug mode":
+ echo "AX-ZSH plugin \"$plugin\" not found (type \"$type\")!" >&2
+ elif [[ "$type" == "zshrc" ]]; then
+ # Show error message for the "zshrc" stage:
+ echo "AX-ZSH plugin \"$plugin\" not found, skipped!" >&2
fi
+ return 1
+ fi
- if [[ -r "$fname" ]]; then
- [[ -f "$HOME/.axzsh.debug" ]] \
- && echo " - $plugin ($type) ..."
- source "$fname"
+ if [[ ! -r "$fname" && "$type" == "zshrc" ]]; then
+ zsh_themes=("$dname/"*.zsh-theme(NY1))
+ if [[ -r "$dname/$plugin.ax-io" || -r "$dname/$plugin.zprofile" || -r "$dname/$plugin.zlogout" ]]; then
+ # Native AX-ZSH plugin, but for different stage. Skip it!
+ :
+ elif [[ -r "$dname/${plugin_short}.plugin.zsh" ]]; then
+ # Oh My ZSH plugin
+ type="plugin.zsh"
+ fname="$dname/${plugin_short}.plugin.zsh"
+ elif [[ -r "$dname/${plugin_short##zsh-}.plugin.zsh" ]]; then
+ # Oh My ZSH plugin with "zsh-" prefix stripped
+ type="plugin.zsh"
+ fname="$dname/${plugin_short##zsh-}.plugin.zsh"
+ elif [[ -r "$dname/${plugin%.plugin.zsh}.plugin.zsh" ]]; then
+ # Oh My ZSH plugin with ".plugin.zsh" suffix in its name
+ type="plugin.zsh"
+ fname="$dname/${plugin}"
+ elif [[ -r "$dname/init.zsh" ]]; then
+ # Prezto module
+ type="init.zsh"
+ fname="$dname/init.zsh"
+ elif [[ ${#zsh_themes} -gt 0 ]]; then
+ # ZSH "theme plugin", ignore here!
+ :
+ else
+ echo "AX-ZSH plugin type of \"$plugin\" unknown, skipped!" >&2
+ echo "Contents of \"$dname\":" >&2
+ ls -lh "$dname/" >&2
return 0
fi
- return 0
- done
- # Plugin not found!
- if [[ -f "$HOME/.axzsh.debug" ]]; then
- # Show error message for all stages in "debug mode":
- echo "AX-ZSH plugin \"$plugin\" not found (type \"$type\")!" >&2
- elif [[ "$type" == "zshrc" ]]; then
- # Show error message for the "zshrc" stage:
- echo "AX-ZSH plugin \"$plugin\" not found, skipped!" >&2
fi
- return 1
+
+ if [[ "$type" == "zprofile" && -d "$dname/functions" ]]; then
+ # Add plugin function path when folder exists
+ [[ -n "$AXZSH_DEBUG" ]] \
+ && echo " - $plugin ($type): functions ..."
+ axzsh_fpath+=("$dname/functions")
+
+ # Add function path to cache file.
+ [[ -n "$cache_file" ]] \
+ && echo "axzsh_fpath+=('$dname/functions')" >>$cache_file
+ fi
+
+ if [[ -r "$fname" ]]; then
+ # Read plugin ...
+ [[ -n "$AXZSH_DEBUG" ]] \
+ && echo " - $plugin ($type) ..."
+
+ # Note for "external" ("repo/*") plugins and unusual ("not so
+ # modern") terminals: These (modern?) plugins most probably
+ # don't expect such a terminal configuration and don't behave
+ # well (echo color sequences, for example). Therefore we DON'T
+ # load any external plugins at all in that case: this results in
+ # reduced/disabled functionality, but hopefully in readable
+ # output ...
+
+ case "$fname" in
+ *"/repos/"*)
+ axzsh_is_modern_terminal && source "$fname"
+ ;;
+ *)
+ source "$fname"
+ esac
+
+ if [[ -n "$cache_file" ]]; then
+ # Add plugin data to cache
+ printf "# BEGIN: %s\nax_plugin_init()\n{\n" "$fname" >>"$cache_file"
+ case "$fname" in
+ *"/repos/"*)
+ echo "[[ -n \"\$AXZSH_DEBUG\" ]] && echo ' - $plugin ($type): \"$fname\" ...'" >>$cache_file
+ echo "axzsh_is_modern_terminal && source '$fname'" >>$cache_file
+ ;;
+ *)
+ echo "[[ -n \"\$AXZSH_DEBUG\" ]] && echo ' - $plugin ($type, cached) ...'" >>$cache_file
+ "$cat_cmd" "$fname" >>"$cache_file"
+ esac
+ printf "}\nax_plugin_init\n# END: %s\n\n" "$fname" >>"$cache_file"
+ fi
+ fi
+
+ # It is a success, even if only the plugin directory (and no script!)
+ # exists at all! Rationale: The script could be of an other type ...
+ return 0
}
-# Make sure that "AXZSH" variable is set and exported
+# Make sure that "my" (=ZSH) directory is in the search path ...
if [[ -z "$AXZSH" ]]; then
- export AXZSH="$HOME/.axzsh"
- if [[ -f "$HOME/.axzsh.debug" ]]; then
- echo "AXZSH=$AXZSH"
- echo "AXZSH_PLUGIN_D=$AXZSH_PLUGIN_D"
- fi
+ _p="${0:h}"
+ [[ "$_p" != "." ]] && PATH="$PATH:${0:h}"
+ unset _p
+fi
+
+# Make sure that "SHELL" variable is set and exported
+[[ -n "$SHELL" ]] || export SHELL=$(command -v zsh)
+
+# Make sure that "AXZSH" variable is set and exported
+[[ -n "$AXZSH" ]] || export AXZSH="$HOME/.axzsh"
+
+# Check for "debug mode" ...
+if [[ -f "$AXZSH/debug" || -f "$HOME/.axzsh.debug" ]]; then
+ export AXZSH_DEBUG=1
+ echo "AXZSH=$AXZSH"
+ echo "AXZSH_DEBUG=$AXZSH_DEBUG"
+ echo "AXZSH_PLUGIN_D=$AXZSH_PLUGIN_D"
+ echo "AXZSH_ZLOGIN_READ=$AXZSH_ZLOGIN_READ"
+ echo "AXZSH_ZPROFILE_READ=$AXZSH_ZPROFILE_READ"
fi
-# Setup list of default plugins if not set already. This allows users to
-# overwrite this list in their "~/.zshenv" file, for example.
-typeset -U axzsh_default_plugins
-if ! typeset +m axzsh_default_plugins | fgrep array >/dev/null 2>&1; then
- axzsh_default_plugins=(
- byebye
- correction
- grep
- history
- less
- ls
- prompt
- ssh
- std_aliases
- std_env
- )
+if [[ "$script_type" = "zprofile" ]]; then
+ # Load all "output" plugins first, that is, before the "zprofile stage":
+ axzsh_handle_stage "$script_name" "ax-io"
fi
-# Setup list of plugins to load:
-typeset -U plugin_list
-plugin_list=(
- $AXZSH/core/[0-5]*
- $axzsh_default_plugins
- $axzsh_plugins
- $plugins
- $AXZSH/core/[6-9]*
-)
-
-# Read in all the plugins for the current "type":
-for plugin ($plugin_list); do
- axzsh_load_plugin "$(basename "$plugin")" "$script_type"
-done
-unset script_name script_type plugin
-unset plugin_list
+axzsh_handle_stage "$script_name" "$script_type"
+
+# Clean up ...
+unfunction axzsh_handle_stage axzsh_load_plugin
+unset script_name script_type
+
+# Hints for external installers:
+# - iTerm2: DON'T install "iterm2_shell_integration"!