2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
12 ngIRCd 0.11.0 (2008-02-27)
14 - send "G" instead of "H" flag in WHO replies (reported by Dana Dahlstrom).
16 ngIRCd 0.11.0 (2008-01-15)
18 - Add support for /STAT u (server uptime) command.
19 - New [Server] configuration Option "Bind" allows to specify
20 the source ip adress to use when connecting to remote server.
21 - New configuration option "MaxNickLength" to specify the allowed maximum
22 length of user nick names. Note: must be unique in an IRC network!
23 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
24 - Added new server configuration option "Passive" for "Server" blocks to
25 disable automatic outgoing connections (similar to -p option to ngircd,
26 but only for the specified server). (Tassilo Schweyer)
27 - Added support for the WALLOPS command. Usage is restricted to IRC
30 ngIRCd 0.10.2 (2007-06-08)
32 - Predefined channel configuration now allows specification of channel key
33 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
34 - When using the epoll() IO interface, compile in the select() interface as
35 well and fall back to it when epoll() isn't available on runtime.
36 - Added support for IO APIs "poll()" and "/dev/poll".
38 ngIRCd 0.10.1 (2006-12-17)
40 - Allow PASS syntax defined in RFC 1459 for server links, too.
41 - New configuration option "PredefChannelsOnly": if set, clients can only
42 join predefined channels.
44 ngIRCd 0.10.0 (2006-10-01)
46 ngIRCd 0.10.0-pre1 (2006-08-02)
47 - Enhanced DIE to accept a single parameter ("comment text") which is sent
48 to all locally connected clients before the server goes down.
49 - JOIN now supports more than one channel key at a time.
50 - Implemented numeric "333": Time and user name who set a channel topic.
51 - Channel topics are no longer limited to 127 characters: now the only limit
52 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
53 limits the topic to about 490 characters due to protocol overhead).
54 - Reverse DNS lookup code now checks the result by doing an additional
55 lookup to prevent spoofing.
56 - Added new IO layer which (optionally) supports epoll() and kqueue() in
57 addition to the select() interface.
59 ngIRCd 0.9.0 (2005-07-24)
61 - Never run with root privileges but always switch the user ID.
62 - Make "netsplit" messages RFC compliant.
63 - Implemented the IRC function "WHOWAS".
64 - New configuration option "OperServerMode" to enable a workaround needed
65 when running an network with ircd2 servers and "OperCanUseMode" enabled
66 to prevent the ircd2 daemon to drop mode changes of IRC operators.
67 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
68 - Implemented support for "secret channels" (channel mode "s").
69 - New configuration option "Mask" for [Operator] sections to limit OPER
70 commands to users with a specific IRC mask. Patch from Florian Westphal.
71 - New configuration variable "PidFile", section "[Global]": if defined,
72 the server writes its process ID (PID) to this file. Default: off.
73 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
74 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
75 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
76 API will be autodetected when you call "./configure --with-rendezvous".
78 ngIRCd 0.8.0 (2004-06-26)
80 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
81 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
82 its root and working directory to something "safe". MotdPhrase is used
83 to define an "MOTD string" instead of a whole file, useful if the
84 "real" MOTD file would be outside the "jail".
85 - INVITE- and BAN-lists become synchronized between IRC+ servers when
86 establishing new connections, if the peer supports this as well.
87 - The type of service (TOS) of all sockets is set to "interactive" now.
88 - Added short command line option "-t" as alternative to "--configtest".
89 - Added optional support for "IDENT" lookups on incoming connections. You
90 have to enable this function with the ./configure switch "--with-ident".
91 The default is not to do IDENT lookups.
93 ngIRCd 0.7.5 (2003-07-11)
95 - New configuration variable "MaxConnectionsIP" to limit the number of
96 simultaneous connections from a single IP that the server will accept.
97 This configuration options lowers the risk of denial of service attacks
98 (DoS), the default is 5 connections per client IP.
99 - Added new configuration variable "Listen" to bind all listening
100 sockets of the server to a single IP address.
102 ngIRCd 0.7.1 (2003-07-18)
104 - Added support for GNU/Hurd.
106 ngIRCd 0.7.0 (2003-05-01)
108 - New command CONNECT to enable and add server links. The syntax is not
109 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
110 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
111 to add a new server (ngIRCd tries to connect new servers only once!).
112 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
113 - New command TRACE (you can trace only servers at the moment).
114 - New command HELP that lists all understood commands.
115 - ngIRCd can register itself with Rendezvous: to enable support pass the
116 new switch "--with-rendezvous" to configure.
117 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
118 configure to enable it.
119 - Changed some configure options to use "--with"/"--without" as prefix
120 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
121 "--with-tcp-wrappers", and "--with-rendezvous".
122 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
123 - Documentation is now installed in $(datadir)/doc/ngircd.
126 Older news (sorry, only available in german language):
128 ngIRCd 0.6.0, 2002-12-24
130 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
131 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
132 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
133 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
134 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
135 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
136 Der Default ist -1, "unlimitiert".
137 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
138 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
139 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
140 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
141 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
142 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
143 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
144 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
145 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
146 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
147 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
148 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
149 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
150 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
151 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
152 miteinander ueber komprimiert Links kommunizieren.
153 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
154 der Channels, in denen ein User Mitglied sein kann, begrent werden.
155 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
157 ngIRCd 0.5.0, 20.09.2002
159 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
160 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
161 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
162 dem "nativen" (ggf. pre-ANSI) Compiler.
163 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
164 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
165 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
166 wenn kein User mehr im Channel ist.
167 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
168 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
169 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
170 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
171 "AdminInfo2" und "AdminEMail".
172 - Invite- und Ban-Lists implementiert.
173 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
174 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
175 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
177 ngIRCd 0.4.2, 29.04.2002
179 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
180 Regular Expressions (bis auf "*") unterstuetzt.
182 ngIRCd 0.4.0, 01.04.2002
184 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
185 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
186 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
187 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
188 zusaetzliche Informationen.
189 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
190 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
191 nicht, so wird der naechste probiert.
192 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
193 einen Hash-Wert gesucht: sollte deutlich schneller sein.
194 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
195 gelesen und die dann verwendeten Werte angezeigt.
196 - Client-Mode "s" (Server Notices) implementiert.
197 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
198 alternative Konfigurationsdatei angegeben werden.
199 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
200 zu einer anderen User-ID und Group-ID wechseln.
202 ngIRCd 0.3.0, 02.03.2002
204 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
205 er auf den IRC-Befehl RESTART reagiert.
206 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
207 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
208 Zum Debuggen manchmal ganz praktisch :-)
209 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
210 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
211 - AWAY (und der User-Mode 'a') ist nun implementiert.
212 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
213 - Channel- und Nicknames werden nun ordentlich validiert.
215 ngIRCd 0.2.0, 15.02.2002
217 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
218 Server versteht an User-Modes o und v, beachtet letzteres allerdings
219 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
220 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
221 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
222 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
224 ngIRCd 0.1.0, 29.01.2002
226 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
227 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
228 Chatten in Channels ist aber natuerlich moeglich ;-)
229 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
230 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
231 - FAQ.txt in doc/ begonnen.
233 ngIRCd 0.0.3, 16.01.2002
235 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
236 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
237 IRC-Netzwerk arbeiten.
238 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
239 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
240 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
241 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
242 - neue Befehle: LUSERS, LINKS.
244 ngIRCd 0.0.2, 06.01.2002
246 - neuer Aufbau der Konfigurationsdatei,
247 - mehrere IRC-Operatoren koennen konfiguriert werden,
248 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
249 nur "leafed server" sein, d.h. keine "Client-Server" haben.
251 ngIRCd 0.0.1, 31.12.2001
253 - erste oeffentliche Version von ngIRCd als "public preview" :-)
257 $Id: NEWS,v 1.83.2.3 2008/02/26 12:06:57 fw Exp $