2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
13 ngIRCd 0.12.1 (2008-07-09)
15 - Add option aliases -V (for --version) and -h (for --help).
16 - Make Listen parameter a comma-seperated list of addresses. This also
17 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
18 is treated as Listen="::,0.0.0.0".
19 Note: ListenIPv4 and ListenIPv6 options are still recognized,
20 but ngircd will print a warning if they are used in the config file.
22 ngIRCd 0.12.0 (2008-05-13)
24 ngIRCd 0.12.0-pre2 (2008-04-29)
25 - IPv6: Add config options to disabe ipv4/ipv6 support.
27 ngIRCd 0.12.0-pre1 (2008-04-20)
29 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
30 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
31 enhanced test suite to check these commands. (Dana Dahlstrom)
32 - IRC_WHO now supports search patterns and will test this against user
33 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
34 (reported by Dana Dahlstrom)
35 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
36 as if the user had sent PART commands for all channels the user is a
37 member of. (Dana Dahlstrom)
38 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
40 ngIRCd 0.11.0 (2008-01-15)
42 - Add support for /STAT u (server uptime) command.
43 - New [Server] configuration Option "Bind" allows to specify
44 the source ip adress to use when connecting to remote server.
45 - New configuration option "MaxNickLength" to specify the allowed maximum
46 length of user nick names. Note: must be unique in an IRC network!
47 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
48 - Added new server configuration option "Passive" for "Server" blocks to
49 disable automatic outgoing connections (similar to -p option to ngircd,
50 but only for the specified server). (Tassilo Schweyer)
51 - Added support for the WALLOPS command. Usage is restricted to IRC
54 ngIRCd 0.10.2 (2007-06-08)
56 - Predefined channel configuration now allows specification of channel key
57 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
58 - When using the epoll() IO interface, compile in the select() interface as
59 well and fall back to it when epoll() isn't available on runtime.
60 - Added support for IO APIs "poll()" and "/dev/poll".
62 ngIRCd 0.10.1 (2006-12-17)
64 - Allow PASS syntax defined in RFC 1459 for server links, too.
65 - New configuration option "PredefChannelsOnly": if set, clients can only
66 join predefined channels.
68 ngIRCd 0.10.0 (2006-10-01)
70 ngIRCd 0.10.0-pre1 (2006-08-02)
71 - Enhanced DIE to accept a single parameter ("comment text") which is sent
72 to all locally connected clients before the server goes down.
73 - JOIN now supports more than one channel key at a time.
74 - Implemented numeric "333": Time and user name who set a channel topic.
75 - Channel topics are no longer limited to 127 characters: now the only limit
76 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
77 limits the topic to about 490 characters due to protocol overhead).
78 - Reverse DNS lookup code now checks the result by doing an additional
79 lookup to prevent spoofing.
80 - Added new IO layer which (optionally) supports epoll() and kqueue() in
81 addition to the select() interface.
83 ngIRCd 0.9.0 (2005-07-24)
85 - Never run with root privileges but always switch the user ID.
86 - Make "netsplit" messages RFC compliant.
87 - Implemented the IRC function "WHOWAS".
88 - New configuration option "OperServerMode" to enable a workaround needed
89 when running an network with ircd2 servers and "OperCanUseMode" enabled
90 to prevent the ircd2 daemon to drop mode changes of IRC operators.
91 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
92 - Implemented support for "secret channels" (channel mode "s").
93 - New configuration option "Mask" for [Operator] sections to limit OPER
94 commands to users with a specific IRC mask. Patch from Florian Westphal.
95 - New configuration variable "PidFile", section "[Global]": if defined,
96 the server writes its process ID (PID) to this file. Default: off.
97 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
98 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
99 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
100 API will be autodetected when you call "./configure --with-rendezvous".
102 ngIRCd 0.8.0 (2004-06-26)
104 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
105 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
106 its root and working directory to something "safe". MotdPhrase is used
107 to define an "MOTD string" instead of a whole file, useful if the
108 "real" MOTD file would be outside the "jail".
109 - INVITE- and BAN-lists become synchronized between IRC+ servers when
110 establishing new connections, if the peer supports this as well.
111 - The type of service (TOS) of all sockets is set to "interactive" now.
112 - Added short command line option "-t" as alternative to "--configtest".
113 - Added optional support for "IDENT" lookups on incoming connections. You
114 have to enable this function with the ./configure switch "--with-ident".
115 The default is not to do IDENT lookups.
117 ngIRCd 0.7.5 (2003-07-11)
119 - New configuration variable "MaxConnectionsIP" to limit the number of
120 simultaneous connections from a single IP that the server will accept.
121 This configuration options lowers the risk of denial of service attacks
122 (DoS), the default is 5 connections per client IP.
123 - Added new configuration variable "Listen" to bind all listening
124 sockets of the server to a single IP address.
126 ngIRCd 0.7.1 (2003-07-18)
128 - Added support for GNU/Hurd.
130 ngIRCd 0.7.0 (2003-05-01)
132 - New command CONNECT to enable and add server links. The syntax is not
133 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
134 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
135 to add a new server (ngIRCd tries to connect new servers only once!).
136 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
137 - New command TRACE (you can trace only servers at the moment).
138 - New command HELP that lists all understood commands.
139 - ngIRCd can register itself with Rendezvous: to enable support pass the
140 new switch "--with-rendezvous" to configure.
141 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
142 configure to enable it.
143 - Changed some configure options to use "--with"/"--without" as prefix
144 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
145 "--with-tcp-wrappers", and "--with-rendezvous".
146 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
147 - Documentation is now installed in $(datadir)/doc/ngircd.
150 Older news (sorry, only available in german language):
152 ngIRCd 0.6.0, 2002-12-24
154 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
155 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
156 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
157 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
158 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
159 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
160 Der Default ist -1, "unlimitiert".
161 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
162 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
163 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
164 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
165 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
166 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
167 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
168 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
169 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
170 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
171 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
172 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
173 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
174 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
175 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
176 miteinander ueber komprimiert Links kommunizieren.
177 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
178 der Channels, in denen ein User Mitglied sein kann, begrent werden.
179 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
181 ngIRCd 0.5.0, 20.09.2002
183 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
184 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
185 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
186 dem "nativen" (ggf. pre-ANSI) Compiler.
187 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
188 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
189 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
190 wenn kein User mehr im Channel ist.
191 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
192 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
193 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
194 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
195 "AdminInfo2" und "AdminEMail".
196 - Invite- und Ban-Lists implementiert.
197 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
198 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
199 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
201 ngIRCd 0.4.2, 29.04.2002
203 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
204 Regular Expressions (bis auf "*") unterstuetzt.
206 ngIRCd 0.4.0, 01.04.2002
208 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
209 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
210 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
211 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
212 zusaetzliche Informationen.
213 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
214 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
215 nicht, so wird der naechste probiert.
216 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
217 einen Hash-Wert gesucht: sollte deutlich schneller sein.
218 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
219 gelesen und die dann verwendeten Werte angezeigt.
220 - Client-Mode "s" (Server Notices) implementiert.
221 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
222 alternative Konfigurationsdatei angegeben werden.
223 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
224 zu einer anderen User-ID und Group-ID wechseln.
226 ngIRCd 0.3.0, 02.03.2002
228 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
229 er auf den IRC-Befehl RESTART reagiert.
230 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
231 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
232 Zum Debuggen manchmal ganz praktisch :-)
233 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
234 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
235 - AWAY (und der User-Mode 'a') ist nun implementiert.
236 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
237 - Channel- und Nicknames werden nun ordentlich validiert.
239 ngIRCd 0.2.0, 15.02.2002
241 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
242 Server versteht an User-Modes o und v, beachtet letzteres allerdings
243 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
244 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
245 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
246 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
248 ngIRCd 0.1.0, 29.01.2002
250 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
251 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
252 Chatten in Channels ist aber natuerlich moeglich ;-)
253 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
254 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
255 - FAQ.txt in doc/ begonnen.
257 ngIRCd 0.0.3, 16.01.2002
259 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
260 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
261 IRC-Netzwerk arbeiten.
262 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
263 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
264 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
265 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
266 - neue Befehle: LUSERS, LINKS.
268 ngIRCd 0.0.2, 06.01.2002
270 - neuer Aufbau der Konfigurationsdatei,
271 - mehrere IRC-Operatoren koennen konfiguriert werden,
272 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
273 nur "leafed server" sein, d.h. keine "Client-Server" haben.
275 ngIRCd 0.0.1, 31.12.2001
277 - erste oeffentliche Version von ngIRCd als "public preview" :-)
281 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $