/*
- * $Id: main.c,v 1.17 2002-09-29 23:29:14 sibaz Exp $
+ * $Id: main.c,v 1.18.6.2.2.6 2009-01-21 04:07:05 didg Exp $
*
* Copyright (c) 1990,1995 Regents of The University of Michigan.
* All Rights Reserved. See COPYRIGHT.
*/
#ifdef HAVE_CONFIG_H
-#include "config.h"
+#include <config.h>
#endif /* HAVE_CONFIG_H */
+#include <string.h>
+
#include <sys/param.h>
#include <sys/time.h>
#include <sys/uio.h>
-#if defined( sun ) && defined( __svr4__ )
-#include </usr/ucbinclude/sys/file.h>
-#else /* sun && __svr4__ */
#include <sys/file.h>
-#endif /* sun && __svr4__ */
#include <sys/socket.h>
#include <atalk/logger.h>
#include <atalk/paths.h>
#include <atalk/util.h>
#include <atalk/nbp.h>
+#include <atalk/unicode.h>
#include "printer.h"
#include "printcap.h"
#include "session.h"
#include "uam_auth.h"
+#include "print_cups.h"
-#define _PATH_PAPDPPDFILE ".ppd"
#define PIPED_STATUS "status: print spooler processing job"
for ( pr = printers; pr; pr = pr->p_next ) {
if ( pr->p_flags & P_REGISTERED ) {
if ( nbp_unrgstr( pr->p_name, pr->p_type, pr->p_zone, &addr ) < 0 ) {
- LOG(log_error, logtype_papd, "can't unregister %s:%s@%s\n", pr->p_name,
+ LOG(log_error, logtype_papd, "can't unregister %s:%s@%s", pr->p_name,
pr->p_type, pr->p_zone );
papd_exit( n + 1 );
}
- LOG(log_error, logtype_papd, "unregister %s:%s@%s\n", pr->p_name, pr->p_type,
+ LOG(log_info, logtype_papd, "unregister %s:%s@%s", pr->p_name, pr->p_type,
pr->p_zone );
}
+#ifdef HAVE_CUPS
+ if ( pr->p_flags & P_SPOOLED && pr->p_flags & P_CUPS_PPD ) {
+ LOG(log_info, logtype_papd, "Deleting CUPS temp PPD file for %s (%s)", pr->p_name, pr->p_ppdfile);
+ unlink (pr->p_ppdfile);
+ }
+#endif /* HAVE_CUPS */
+
}
papd_exit( n );
}
char *p, hostname[ MAXHOSTNAMELEN ];
char cbuf[ 8 ];
int c;
+ char *atname;
if ( gethostname( hostname, sizeof( hostname )) < 0 ) {
perror( "gethostname" );
defprinter.p_type = "LaserWriter";
defprinter.p_zone = "*";
memset(&defprinter.p_addr, 0, sizeof(defprinter.p_addr));
- defprinter.p_ppdfile = _PATH_PAPDPPDFILE;
#ifdef __svr4__
defprinter.p_flags = P_PIPED;
defprinter.p_printer = "/usr/bin/lp -T PS";
}
}
- getprinters( conffile );
switch (server_lock("papd", pidfile, debug)) {
case 0: /* open a couple things again in the child */
- if ((c = open("/", O_RDONLY)) >= 0) {
+ if (!debug && (c = open("/", O_RDONLY)) >= 0) {
dup2(c, 1);
dup2(c, 2);
}
exit(0);
}
+#ifdef DEBUG1
+ fault_setup(NULL);
+#endif
+
/*
* Start logging.
*/
openlog( p, LOG_PID );
#else /* ultrix */
set_processname(p);
- syslog_setup(log_debug, logtype_default, logoption_ndelay|logoption_pid, logfacility_lpr );
+ syslog_setup(log_debug, logtype_default, logoption_ndelay | logoption_pid |
+ debug ? logoption_perror : 0, logfacility_lpr );
#endif /* ultrix */
LOG(log_info, logtype_papd, "restart (%s)", version );
+#ifdef HAVE_CUPS
+ LOG(log_info, logtype_papd, "CUPS support enabled (%s)", CUPS_API_VERSION );
+#endif
+
+ getprinters( conffile );
for ( pr = printers; pr; pr = pr->p_next ) {
if (( pr->p_flags & P_SPOOLED ) && rprintcap( pr ) < 0 ) {
LOG(log_error, logtype_papd, "printcap problem: %s", pr->p_printer );
}
+
+ if (!(pr->p_flags & P_CUPS)) {
+ if ((size_t)-1 != convert_string_allocate(CH_UNIX, CH_MAC, pr->p_name, strlen(pr->p_name), &atname)) {
+ pr->p_u_name = pr->p_name;
+ pr->p_name = atname;
+ }
+ }
+
if (( pr->p_atp = atp_open( ATADDR_ANYPORT, &pr->p_addr )) == NULL ) {
- LOG(log_error, logtype_papd, "atp_open: %m" );
+ LOG(log_error, logtype_papd, "atp_open: %s", strerror(errno) );
papd_exit( 1 );
}
if ( nbp_rgstr( atp_sockaddr( pr->p_atp ), pr->p_name, pr->p_type,
pr->p_zone ) < 0 ) {
- LOG(log_error, logtype_papd, "can't register %s:%s@%s", pr->p_name, pr->p_type,
+ LOG(log_error, logtype_papd, "can't register %s:%s@%s", pr->p_u_name, pr->p_type,
pr->p_zone );
die( 1 );
}
if ( pr->p_flags & P_AUTH ) {
- LOG(log_info, logtype_papd, "Authentication enabled: %s", pr->p_name );
+ LOG(log_info, logtype_papd, "Authentication enabled: %s", pr->p_u_name );
}
else {
- LOG(log_info, logtype_papd, "Authentication disabled: %s", pr->p_name );
+ LOG(log_info, logtype_papd, "Authentication disabled: %s", pr->p_u_name );
}
- LOG(log_info, logtype_papd, "register %s:%s@%s", pr->p_name, pr->p_type,
+ LOG(log_info, logtype_papd, "register %s:%s@%s", pr->p_u_name, pr->p_type,
pr->p_zone );
pr->p_flags |= P_REGISTERED;
}
sigemptyset( &sv.sa_mask );
sv.sa_flags = SA_RESTART;
if ( sigaction( SIGTERM, &sv, 0 ) < 0 ) {
- LOG(log_error, logtype_papd, "sigaction: %m" );
+ LOG(log_error, logtype_papd, "sigaction: %s", strerror(errno) );
papd_exit( 1 );
}
sigemptyset( &sv.sa_mask );
sv.sa_flags = SA_RESTART;
if ( sigaction( SIGCHLD, &sv, 0 ) < 0 ) {
- LOG(log_error, logtype_papd, "sigaction: %m" );
+ LOG(log_error, logtype_papd, "sigaction: %s", strerror(errno) );
papd_exit( 1 );
}
if ( errno == EINTR ) {
continue;
}
- LOG(log_error, logtype_papd, "select: %m" );
+ LOG(log_error, logtype_papd, "select: %s", strerror(errno) );
papd_exit( 1 );
}
atpb.atp_rreqdata = cbuf;
atpb.atp_rreqdlen = sizeof( cbuf );
if ( atp_rreq( pr->p_atp, &atpb ) < 0 ) {
- LOG(log_error, logtype_papd, "atp_rreq: %m" );
+ LOG(log_error, logtype_papd, "atp_rreq: %s", strerror(errno) );
continue;
}
err = 1;
}
+#ifdef HAVE_CUPS
+ /*
+ * If cups is not accepting jobs, we return
+ * 0xffff to indicate we're busy
+ */
+#ifdef DEBUG
+ LOG(log_debug, logtype_papd, "CUPS: PAP_OPEN");
+#endif
+ if ( (pr->p_flags & P_SPOOLED) && (cups_get_printer_status ( pr ) == 0)) {
+ LOG(log_error, logtype_papd, "CUPS_PAP_OPEN: %s is not accepting jobs",
+ pr->p_printer );
+ rbuf[ 2 ] = rbuf[ 3 ] = 0xff;
+ err = 1;
+ }
+#endif /* HAVE_CUPS */
+
/*
* If this fails, we've run out of sockets. Rather than
* just die(), let's try to continue. Maybe some sockets
*/
if (( atp = atp_open( ATADDR_ANYPORT,
&pr->p_addr)) == NULL ) {
- LOG(log_error, logtype_papd, "atp_open: %m" );
- rbuf[ 2 ] = rbuf[ 3 ] = 0xff;
+ LOG(log_error, logtype_papd, "atp_open: %s", strerror(errno) );
+ rbuf[ 2 ] = rbuf[ 3 ] = 0xff; /* printer busy */
+ rbuf[ 4 ] = 0; /* FIXME is it right? */
err = 1;
}
- rbuf[ 4 ] = atp_sockaddr( atp )->sat_port;
+ else {
+ rbuf[ 4 ] = atp_sockaddr( atp )->sat_port;
+ }
rbuf[ 5 ] = oquantum;
rbuf[ 6 ] = rbuf[ 7 ] = 0;
* This may error out if we lose a route, so we won't die().
*/
if ( atp_sresp( pr->p_atp, &atpb ) < 0 ) {
- LOG(log_error, logtype_papd, "atp_sresp: %m" );
- continue;
+ LOG(log_error, logtype_papd, "atp_sresp: %s", strerror(errno) );
+ err = 1;
}
if ( err ) {
+ if (atp) {
+ atp_close(atp);
+ }
continue;
}
switch ( c = fork()) {
case -1 :
- LOG(log_error, logtype_papd, "fork: %m" );
+ LOG(log_error, logtype_papd, "fork: %s", strerror(errno) );
+ atp_close(atp);
continue;
case 0 : /* child */
printer = pr;
+ #ifndef HAVE_CUPS
if (( printer->p_flags & P_SPOOLED ) &&
chdir( printer->p_spool ) < 0 ) {
- LOG(log_error, logtype_papd, "chdir %s: %m", printer->p_spool );
+ LOG(log_error, logtype_papd, "chdir %s: %s", printer->p_spool, strerror(errno) );
+ exit( 1 );
+ }
+ #else
+ if (( printer->p_flags & P_SPOOLED ) &&
+ chdir( SPOOLDIR ) < 0 ) {
+ LOG(log_error, logtype_papd, "chdir %s: %s", SPOOLDIR, strerror(errno) );
exit( 1 );
}
+ #endif
+
sv.sa_handler = SIG_DFL;
sigemptyset( &sv.sa_mask );
sv.sa_flags = SA_RESTART;
if ( sigaction( SIGTERM, &sv, 0 ) < 0 ) {
- LOG(log_error, logtype_papd, "sigaction: %m" );
+ LOG(log_error, logtype_papd, "sigaction: %s", strerror(errno) );
exit( 1 );
}
* This may error out if we lose a route, so we won't die().
*/
if ( atp_sresp( pr->p_atp, &atpb ) < 0 ) {
- LOG(log_error, logtype_papd, "atp_sresp: %m" );
+ LOG(log_error, logtype_papd, "atp_sresp: %s", strerror(errno) );
}
break;
* This may error out if we lose a route, so we won't die().
*/
if ( atp_sresp( pr->p_atp, &atpb ) < 0 ) {
- LOG(log_error, logtype_papd, "atp_sresp: %m" );
+ LOG(log_error, logtype_papd, "atp_sresp: %s", strerror(errno) );
}
#endif /* notdef */
}
struct printer *pr;
char *buf;
{
+
+#ifdef HAVE_CUPS
+ if ( pr->p_flags & P_PIPED ) {
+ *buf = strlen( cannedstatus );
+ strncpy( &buf[ 1 ], cannedstatus, *buf );
+ return( *buf + 1 );
+ } else {
+ cups_get_printer_status( pr );
+ *buf = strlen ( pr->p_status );
+ strncpy ( &buf[1], pr->p_status, *buf);
+ return ( *buf + 1);
+ }
+#else
+
char path[ MAXPATHLEN ];
int fd = -1, rc;
*buf = rc;
return( rc + 1 );
}
+#endif /* HAVE_CUPS */
}
char *pgetstr();
/*
* Get PPD file.
*/
- if (( p = pgetstr( "pd", &a )) == NULL ) {
- pr->p_ppdfile = defprinter.p_ppdfile;
- } else {
+ if (( p = pgetstr( "pd", &a ) )) {
if (( pr->p_ppdfile = (char *)malloc( strlen( p ) + 1 )) == NULL ) {
perror( "malloc" );
exit( 1 );
else
atalk_aton(p, &pr->p_addr);
- pr->p_next = printers;
- printers = pr;
+#ifdef HAVE_CUPS
+ if ((p = pgetstr("co", &a)) != NULL ) {
+ pr->p_cupsoptions = strdup(p);
+ LOG (log_error, logtype_papd, "enabling cups-options for %s: %s", pr->p_name, pr->p_cupsoptions);
+ }
+#endif
+
+ /* convert line endings for setup sections.
+ real ugly work around for foomatic deficiencies,
+ need to get rid of this */
+ if ( pgetflag("fo") == 1 ) {
+ pr->p_flags |= P_FOOMATIC_HACK;
+ LOG (log_error, logtype_papd, "enabling foomatic hack for %s", pr->p_name);
+ }
+
+ if (strncasecmp (pr->p_name, "cupsautoadd", 11) == 0)
+ {
+#ifdef HAVE_CUPS
+ pr = cups_autoadd_printers (pr, printers);
+ printers = pr;
+#else
+ LOG (log_error, logtype_papd, "cupsautoadd: Cups support not compiled in");
+#endif /* HAVE_CUPS */
+ }
+ else {
+#ifdef HAVE_CUPS
+ if ( cups_check_printer ( pr, printers, 1) == 0)
+ {
+ pr->p_next = printers;
+ printers = pr;
+ }
+#else
+ pr->p_next = printers;
+ printers = pr;
+#endif /* HAVE_CUPS */
+ }
}
if ( c == 0 ) {
endprent();
int rprintcap( pr )
struct printer *pr;
{
+
+#ifdef HAVE_CUPS
+
+ char *p;
+
+ if ( pr->p_flags & P_SPOOLED && !(pr->p_flags & P_CUPS_AUTOADDED) ) { /* Skip check if autoadded */
+ if ( cups_printername_ok ( pr->p_printer ) != 1) {
+ LOG(log_error, logtype_papd, "No such CUPS printer: '%s'", pr->p_printer );
+ return( -1 );
+ }
+ }
+
+ /*
+ * Check for ppd file, moved here because of cups_autoadd we cannot check at the usual location
+ */
+
+ if ( pr->p_ppdfile == NULL ) {
+ if ( (p = (char *) cups_get_printer_ppd ( pr->p_printer )) != NULL ) {
+ if (( pr->p_ppdfile = (char *)malloc( strlen( p ) + 1 )) == NULL ) {
+ LOG(log_error, logtype_papd, "malloc: %s", strerror(errno) );
+ exit( 1 );
+ }
+ strcpy( pr->p_ppdfile, p );
+ pr->p_flags |= P_CUPS_PPD;
+ LOG(log_info, logtype_papd, "PPD File for %s set to %s", pr->p_printer, pr->p_ppdfile );
+ }
+ }
+
+
+#else
+
char buf[ 1024 ], area[ 1024 ], *a, *p;
int c;
pr->p_spool = defprinter.p_spool;
} else {
if (( pr->p_spool = (char *)malloc( strlen( p ) + 1 )) == NULL ) {
- LOG(log_error, logtype_papd, "malloc: %m" );
+ LOG(log_error, logtype_papd, "malloc: %s", strerror(errno) );
exit( 1 );
}
strcpy( pr->p_spool, p );
} else {
if (( pr->p_role =
(char *)malloc( strlen( p ) + 1 )) == NULL ) {
- LOG(log_error, logtype_papd, "malloc: %m" );
+ LOG(log_error, logtype_papd, "malloc: %s", strerror(errno) );
exit( 1 );
}
strcpy( pr->p_role, p );
if (( p = pgetstr( "pc", &a )) != NULL ) {
if (( pr->p_pagecost_msg =
(char *)malloc( strlen( p ) + 1 )) == NULL ) {
- LOG(log_error, logtype_papd, "malloc: %m" );
+ LOG(log_error, logtype_papd, "malloc: %s", strerror(errno) );
exit( 1 );
}
strcpy( pr->p_pagecost_msg, p );
pr->p_lock = defprinter.p_lock;
} else {
if (( pr->p_lock = (char *)malloc( strlen( p ) + 1 )) == NULL ) {
- LOG(log_error, logtype_papd, "malloc: %m" );
+ LOG(log_error, logtype_papd, "malloc: %s", strerror(errno) );
exit( 1 );
}
strcpy( pr->p_lock, p );
endprent();
}
+#endif /* HAVE_CUPS */
return( 0 );
}
projects / netatalk.git / blobdiff