ngIRCd - Next Generation IRC Server
- (c)2001,2002 by Alexander Barton,
+ (c)2001-2006 Alexander Barton,
alex@barton.de, http://www.barton.de/
- ngIRCd ist freie Software und steht unter
- der GNU General Public License.
+ ngIRCd is free software and published under the
+ terms of the GNU General Public License.
- -- NEWS / Neuigkeiten --
+ -- NEWS --
+ngIRCd 0.10.1 (2006-12-17)
+
+ - Allow PASS syntax defined in RFC 1459 for server links, too.
+ - New configuration option "PredefChannelsOnly": if set, clients can only
+ join predefined channels.
+
+ngIRCd 0.10.0 (2006-10-01)
+
+ ngIRCd 0.10.0-pre1 (2006-08-02)
+ - Enhanced DIE to accept a single parameter ("comment text") which is sent
+ to all locally connected clients before the server goes down.
+ - JOIN now supports more than one channel key at a time.
+ - Implemented numeric "333": Time and user name who set a channel topic.
+ - Channel topics are no longer limited to 127 characters: now the only limit
+ is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
+ limits the topic to about 490 characters due to protocol overhead).
+ - Reverse DNS lookup code now checks the result by doing an additional
+ lookup to prevent spoofing.
+ - Added new IO layer which (optionally) supports epoll() and kqueue() in
+ addition to the select() interface.
+
+ngIRCd 0.9.0 (2005-07-24)
+
+ - Never run with root privileges but always switch the user ID.
+ - Make "netsplit" messages RFC compliant.
+ - Implemented the IRC function "WHOWAS".
+ - New configuration option "OperServerMode" to enable a workaround needed
+ when running an network with ircd2 servers and "OperCanUseMode" enabled
+ to prevent the ircd2 daemon to drop mode changes of IRC operators.
+ Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
+ - Implemented support for "secret channels" (channel mode "s").
+ - New configuration option "Mask" for [Operator] sections to limit OPER
+ commands to users with a specific IRC mask. Patch from Florian Westphal.
+ - New configuration variable "PidFile", section "[Global]": if defined,
+ the server writes its process ID (PID) to this file. Default: off.
+ Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
+ - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
+ Rendezvous API, in addition to the API of Apple (Mac OS X). The available
+ API will be autodetected when you call "./configure --with-rendezvous".
+
+ngIRCd 0.8.0 (2004-06-26)
+
+ - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
+ Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
+ its root and working directory to something "safe". MotdPhrase is used
+ to define an "MOTD string" instead of a whole file, useful if the
+ "real" MOTD file would be outside the "jail".
+ - INVITE- and BAN-lists become synchronized between IRC+ servers when
+ establishing new connections, if the peer supports this as well.
+ - The type of service (TOS) of all sockets is set to "interactive" now.
+ - Added short command line option "-t" as alternative to "--configtest".
+ - Added optional support for "IDENT" lookups on incoming connections. You
+ have to enable this function with the ./configure switch "--with-ident".
+ The default is not to do IDENT lookups.
+
+ngIRCd 0.7.5 (2003-07-11)
+
+ - New configuration variable "MaxConnectionsIP" to limit the number of
+ simultaneous connections from a single IP that the server will accept.
+ This configuration options lowers the risk of denial of service attacks
+ (DoS), the default is 5 connections per client IP.
+ - Added new configuration variable "Listen" to bind all listening
+ sockets of the server to a single IP address.
+
+ngIRCd 0.7.1 (2003-07-18)
+
+ - Added support for GNU/Hurd.
+
+ngIRCd 0.7.0 (2003-05-01)
+
+ - New command CONNECT to enable and add server links. The syntax is not
+ RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
+ configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
+ to add a new server (ngIRCd tries to connect new servers only once!).
+ - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
+ - New command TRACE (you can trace only servers at the moment).
+ - New command HELP that lists all understood commands.
+ - ngIRCd can register itself with Rendezvous: to enable support pass the
+ new switch "--with-rendezvous" to configure.
+ - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
+ configure to enable it.
+ - Changed some configure options to use "--with"/"--without" as prefix
+ instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
+ "--with-tcp-wrappers", and "--with-rendezvous".
+ - Enhanced manual pages ngircd(8) and ngircd.conf(5).
+ - Documentation is now installed in $(datadir)/doc/ngircd.
+
+
+Older news (sorry, only available in german language):
+
+ngIRCd 0.6.0, 2002-12-24
+
+ - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
+ noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
+ - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
+ bei Bedarf bis zu einem konfigurierten Limit vergroessert.
+ - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
+ kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
+ Der Default ist -1, "unlimitiert".
+ - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
+ Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
+ ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
+ Servern in der Konfiguration ein Port fuer den Connect konfiguriert
+ werden (beide Server versuchen sich dann gegenseitig zu connectieren).
+ - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
+ Passwort, welches A an B schickt, kann ein anderes sein als das, welches
+ B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
+ wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
+ - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
+ macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
+ - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
+ (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
+ nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
+ kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
+ miteinander ueber komprimiert Links kommunizieren.
+ - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
+ der Channels, in denen ein User Mitglied sein kann, begrent werden.
+ - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
+
+ngIRCd 0.5.0, 20.09.2002
+
+ - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
+ (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
+ - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
+ dem "nativen" (ggf. pre-ANSI) Compiler.
+ - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
+ Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
+ Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
+ wenn kein User mehr im Channel ist.
+ - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
+ Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
+ Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
+ gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
+ "AdminInfo2" und "AdminEMail".
+ - Invite- und Ban-Lists implementiert.
+ - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
+ ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
+ - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
+
+ngIRCd 0.4.2, 29.04.2002
+
+ - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
+ Regular Expressions (bis auf "*") unterstuetzt.
+
+ngIRCd 0.4.0, 01.04.2002
+
+ - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
+ - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
+ Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
+ ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
+ zusaetzliche Informationen.
+ - Server-Gruppen implementiert: es wird immer nur zu einem Server in
+ einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
+ nicht, so wird der naechste probiert.
+ - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
+ einen Hash-Wert gesucht: sollte deutlich schneller sein.
+ - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
+ gelesen und die dann verwendeten Werte angezeigt.
+ - Client-Mode "s" (Server Notices) implementiert.
+ - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
+ alternative Konfigurationsdatei angegeben werden.
+ - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
+ zu einer anderen User-ID und Group-ID wechseln.
+
+ngIRCd 0.3.0, 02.03.2002
+
+ - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
+ er auf den IRC-Befehl RESTART reagiert.
+ - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
+ verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
+ Zum Debuggen manchmal ganz praktisch :-)
+ - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
+ - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
+ - AWAY (und der User-Mode 'a') ist nun implementiert.
+ - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
+ - Channel- und Nicknames werden nun ordentlich validiert.
+
+ngIRCd 0.2.0, 15.02.2002
+
+ - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
+ Server versteht an User-Modes o und v, beachtet letzteres allerdings
+ noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
+ bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
+ nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
+ - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
+
+ngIRCd 0.1.0, 29.01.2002
+
+ - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
+ es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
+ Chatten in Channels ist aber natuerlich moeglich ;-)
+ Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
+ - neue Befehle fuer Channles: JOIN, PART und NJOIN.
+ - FAQ.txt in doc/ begonnen.
+
+ngIRCd 0.0.3, 16.01.2002
+
+ - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
+ "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
+ IRC-Netzwerk arbeiten.
+ - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
+ - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
+ - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
+ - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
+ - neue Befehle: LUSERS, LINKS.
+
+ngIRCd 0.0.2, 06.01.2002
+
+ - neuer Aufbau der Konfigurationsdatei,
+ - mehrere IRC-Operatoren koennen konfiguriert werden,
+ - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
+ nur "leafed server" sein, d.h. keine "Client-Server" haben.
+
ngIRCd 0.0.1, 31.12.2001
- erste oeffentliche Version von ngIRCd als "public preview" :-)
--
-$Id: NEWS,v 1.3 2002/01/02 02:52:09 alex Exp $
+$Id: NEWS,v 1.78 2006/12/17 21:00:30 alex Exp $