ngIRCd - Next Generation IRC Server
http://ngircd.barton.de/
- (c)2001-2011 Alexander Barton and Contributors.
+ (c)2001-2024 Alexander Barton and Contributors.
ngIRCd is free software and published under the
terms of the GNU General Public License.
-- ChangeLog --
-
-ngIRCd Release 18 (2011-07-10)
+ngIRCd 27 (2024-04-26)
+
+ - Update ChangeLog, NEWS, AUTHORS.md & doc/Platforms.txt for ngIRCd 27.
+ - Clarify in the sample configuration file and the ngircd.conf(5) manual
+ page that the "CAFile" option is unset by default.
+ - Fix channel symbol returned in the RPL_NAMREPLY(353) numeric of NAMES
+ commands for secret (mode +s) channels: this should be "@", not "=".
+ Thanks Val Lorentz <progval+git@progval.net> for the patch!
+ Closes #313.
+ - Add an example filter file for "Fail2Ban": contrib/ngircd-fail2ban.conf.
+ - Don't abort startup when setgid/setuid() fails with EINVAL: Both setgid(2)
+ as well as setuid(2) can fail with EINVAL in addition to EPERM, their
+ manual pages state "EINVAL: The user/group ID specified in uid/gid is not
+ valid in this user namespace ". So not only treat EPERM as an "acceptable
+ error" and continue with logging the error, but do the same for EINVAL.
+ This was triggered by the Void Linux xbps-uunshare(1) tool used for
+ building "XBPS source packages" and reported by luca in #ngircd. Thanks!
+ - Test suite: Don't use "pgrep -u" when LOGNAME and USER are not set
+ Thanks for reporting this on IRC, luca!
+
+ ngIRCd 27~rc1 (2024-04-13)
+ - Validate certificates on server links. Up to now, ngIRCd optionally used
+ SSL/TLS encrypted server-server links but never checked and validated any
+ certificates. Now ngIRCd validates SSL/TLS certificates on outgoing
+ server-server links by default and drops(!) connections when the remote
+ certificate is invalid (for example self-signed, expired, not matching the
+ host name, ...). Therefore you have to make sure that all relevant
+ *certificates are valid* (or to disable certificate validation on this
+ connection using the new `SSLVerify = false` setting in the affected
+ `[Server]` block, where the remote certificate is not valid and you can not
+ fix this issue).
+ The original patch for OpenSSL dates back to 2009 and was written by Florian
+ Westphal and was extended for GnuTLS in 2014 by Christoph Biedl. But it took
+ us another 10 years to bring it to life ... oh my! Many thanks to both
+ Florian and Christoph!
+ Closes #120.
+ - Add support for the "sd_notify" protocol of systemd(8): Periodically
+ "ping" the service manager (every 3 seconds) and set a status message
+ showing current connection statistics which then is included in "systemctl
+ status ngircd.service" output. In addition, this enables using the
+ systemd(8) watchdog functionality ("WatchdogSec") for the "ngircd.service"
+ unit and allows it to use the "notify" service type, which results in
+ better status tracking by the service manager.
+ - Try to set file descriptor limit to its maximum and show info on startup:
+ The number of possible parallel connections is limited by the file
+ descriptor limit of the process (among other things). Therefore try to
+ upgrade the current "soft" limit to its "hard" maximum (but limited to
+ 100000 instead of "infinite"), and show an information or even warning when
+ the limit is still less than the configured "MaxConnections" setting. Please
+ note that ngIRCd and its linked libraries (like PAM) need file descriptors
+ not only for incoming and outgoing IRC connections, but for reading files
+ and inter-process communication, too! Therefore the actual connection limit
+ is less(!) than the file descriptor limit!
+ - Update and fix the logcheck(8) rules file.
+ - METADATA: Fix unsetting the "cloakhost" hostname, which did not result in
+ the original hostname being restored, but actually resulted in an empty
+ string being used as the client hostname -- which is a protocol violation.
+ - Update the "rpm" make target to use the rpmbuild(8) command.
+ - Add a "Docker file" (contrib/Dockerfile) and corresponding documentation
+ (doc/Container.md) to the project. The resulting container is based on the
+ latest Debian "stable-slim" container and built using a "build container".
+ - Remove outdated, unsupported and broken support for splint(1).
+ - Don't show the default config file name on config errors: The configuration
+ can be set in drop-in files in the include directory, too, so it is not
+ clear in which file it is actually missing.
+ - No longer use a default built-in value for the "IncludeDir" directive when
+ a configuration file was explicitly specified on the command line using
+ "--config"/"-f": This way no default include directory is scanned when a
+ possibly non-default configuration file is used which (intentionally) did
+ not specify an "IncludeDir" directive. So now you can use "-f /dev/null"
+ for checking all built-in defaults, regardless of any local configuration
+ files in the default drop-in directory (which would have been read in
+ until this change).
+ - No longer log channel keys ("passwords") for predefined channels.
+ - The server "Name" in the "[Global]" section of the configuration file no
+ longer needs to be set: When not set (or empty), ngIRCd now tries to
+ deduce a valid IRC server name from the local host name ("node name"),
+ possibly adding a ".host" extension when the host name does not contain a
+ dot (".") which is required in an IRC server name ("ID").
+ This new behavior, with all configuration parameters now being optional,
+ allows running ngIRCd without any configuration file at all.
+ - Silence some compiler warnings.
+ - autogen.sh: Prefer automake 1.11 over other releases because this is the
+ last release supporting "de-ANSI-fication" using the included ansi2knr tool.
+ And because we _want_ to support old K&R platforms, we try hard to use this
+ release of automake when available to generate our build system.
+ Note: This is only relevant for you if you are building from Git sources.
+ - Autodetect support for IPv6 by default: Until now, IPv6 support was disabled
+ by default, which seems a bit outdated in 2024. Note: You still can pass
+ "--enable-ipv6"/"--disable-ipv6" to the ./configure script to forcefully
+ activate or deactivate IPv6 support.
+ - Do IDENT requests even when DNS lookups are disabled: Up to now disabling
+ DNS in the configuration disabled IDENT lookups as well (for no good
+ reason). Now you can activate/deactivate DNS lookups and IDENT requests
+ completely separately. Thanks for reporting this, Miniontoby!
+ Closes #291.
+ - Update config.guess (2023-08-22) and config.sub (2023-09-19) files.
+ - Fix Channel Admins being able to to set Channel Owner status! "Sarah"
+ reported this back in April 2021 and proposed a patch, thanks a lot!
+ - Test suite: Update for OpenSSL 3.x, some command outputs changed, clean up
+ shell scripts and make the getpid.sh script more robust.
+ - Allow SSL client-only configurations without keys/certificates: You don't
+ need to configure certificates/keys as long as you don't configure
+ SSL-enabled listening ports. This can make sense when you want to only link
+ your local daemon to an uplink server using SSL and only have clients on
+ your local host or in your fully trusted network, where SSL is not required.
+ - Remove the unmaintained contrib/MacOSX/ folder: this includes the Xcode
+ project as well as the outdated macOS "Package Maker" configuration. The
+ sample launchd(8) configuration properties list file was moved to
+ "contrib/de.barton.ngircd.plist" and kept.
+ - Fix showing the "Ident" option in "--configtest" output which was never
+ shown because of a coding error. Whoops!
+ - Change GnuTLS "slot handling" messages to debug level: Those messages are
+ about an internal implementation detail, not relevant for an administrator
+ of ngIRCd.
+ - Enlarge buffer for log messages: For example, SSL/TLS certificate
+ information can easily get longer than 256 characters. So enlarge the log
+ buffer to 1 KB to avoid cutting off relevant information.
+ - Respect "SSLConnect" option for incoming connections and do not accept
+ incoming plain-text ("non SSL") server connections for servers configured
+ with "SSLConnect" enabled. This change prevents an authenticated
+ client-server being able to force the server-server to send its password
+ on a plain-text connection when SSL/TLS was intended.
+ - Always try to close a connection with errors immediately, but try hard
+ to avoid too much recursion. Without this patch, an outgoing server
+ connection could get stuck in an "endless" state trying to write out data
+ over and over again.
+ - Add "hopm.service" to "Wants" and "Before" dependencies in the sample
+ systemd unit file (Hopm is the successor of Bopm).
+ - Update Debian package configuration using current "dh_make", package
+ dependencies and build rules. And no longer build 3 different versions,
+ only build "ngircd" which now includes support for IDENT, PAM (disabled in
+ the ngircd.conf installed by the package), SSL (OpenSSL), ZLib and IPv6.
+ - Return ERR_NOTEXTTOSEND on empty PRIVMSG content, which matches the
+ behavior of other servers.
+ - Add a new option "Autojoin" to [Channel] blocks: When it is set, ngIRCd
+ automatically joins all local users to this channel on connect. Note: The
+ users must have permissions to access the channel, otherwise joining them
+ will fail!
+ Thanks Ivan Agarkov <i_agarkov@wargaming.net> for the initial patch!
+ - Hide invisible (+i) users on "WHOIS <pattern>": Let's behave like most(?)
+ other IRC daemons (at least ircd2.11) and hide all +i users when WHOIS is
+ used with a pattern. Otherwise privacy of this users is not guaranteed and
+ the +i mode a bit useless ...
+ Reported by Cahata on #ngircd, thanks!
+ - Update the final "closing connection" message: Add some more information
+ like nick name, user name, host name and bring it in line with some other
+ implementations (at least ircd2.11 and Hybrid).
+ - Fix RPL_INVITING message: All numeric replies must originate from an IRC
+ server, never from a client. Thanks "tommyrot" for reporting this!
+ Closes #307.
+ - Enhance some log messages, for example for errors when accepting new
+ connections.
+ - Make the debug log level ("--debug"/-"d" command line option) always
+ available, not only when ./configure'd with "--enable-debug": the latter
+ now only enables additional checks (like the tests done using assert(2))
+ and is signalled by adding "+DEBUG" to the version "feature string". This
+ change enables everyone to get even more detailed logging when required.
+ - Always report an error when a parameter is missing in a channel "MODE +k"
+ or "MODE +l" command, and better validate their parameters: return the new
+ numeric ERR_INVALIDMODEPARAM_MSG(696) on errors.
+ Thanks Val Lorentz for reporting this!
+ Closes #290.
+ - Allow IRC Operators to use the WHO command on any channel.
+ - Add configuration for "ngIRCd CI" GitHub Action, no longer use Travis-CI.
+ - Send the NAMES list and channel topic to users "forcefully" joined to a
+ channel using NJOIN, like they joined on their own using JOIN, and
+ streamline the order of NAMES list and channel topic messages.
+ Closes #288.
+ - Fix (invalid) error messages when setting modes on local channels which
+ are defined in the configuration file.
+ - Fix handling of G-Lines/K-Lines with cloaked host names.
+ - Streamline logging of debug messages.
+ - Added a new command line option "-y"/"--syslog", with which logging to
+ syslog can be activated/deactivated separately from running on the console
+ (using "--nodaemon") or in the background.
+ Thanks Katherine Peeters for the patch and pull request!
+ Closes #294.
+ - Fix a possible race condition while introducing new clients in the network.
+ - Update, enhance and extend our documentation in README.md, INSTALL.md,
+ doc/HowToRelease.txt and the manual pages ngircd(8) and ngircd.conf(5), add
+ a new doc/QuickStart.md document, and convert some more documentation files
+ to Markdown (AUTHORS.md, contrib/README.md, doc/FAQ.md, doc/SSL.md).
+
+ngIRCd 26.1 (2021-01-02)
+
+ - Fix a "format string" compiler warning (detected on OpenBSD).
+ - No longer set "AI_ADDRCONFIG" when resolving host names, even when it
+ exists: with this option set, on an IPv6-only host, we prevent 127.0.0.1
+ to get translated properly, even when the loopback interface has this
+ address configured! And as the test suite uses 127.0.0.1, it was broken
+ on IPv6-only hosts.
+ The drawback is that the resolver possibly returns more addresses now,
+ even of an unsupported/not connected address family; but this shouldn't
+ do much harm in practice, as ngIRCd iterates over all returned addresses
+ while trying to establish an outgoing connection.
+ Closes #281.
+ - Revert "Show allowed channel types in ISUPPORT(005) numeric only", which
+ was introduced in 26~rc1: This lead to some IRC clients assuming "oh, no
+ channel prefix characters at all, so no channels at all, so no PRIVMSG can
+ go to any channel" when "AllowedChannelTypes" was set to the empty string
+ ("") -- which is not the case when there are pre-defined channel set up or
+ other servers still having channels!
+ So "allowed channel types" != "supported channel types", and we always have
+ to list all supported ones in the ISUPPORT(005) numeric!
+ Closes #285.
+ - Test suite: Wait 2 seconds after reloading the daemon, which is required
+ because on reload, all listening ports are closed, configuration updated,
+ and then opened again. This lead to subsequent tests running while the
+ daemon isn't listening on any ports, and that's why some tests could fail.
+ Closes #280.
+ - platformtest.sh: Try to mangle CLang name more intelligently.
+ - Documentation: Fixed URLs of Atheme IRC services, updated all mentions
+ from CVS to Git, and updated Platforms.txt -- Oh, and it is 2021 now! ;-)
+
+ngIRCd 26 (2020-06-20)
+
+ ngIRCd 26~rc2 (2020-06-11)
+ - Add AppStream metadata file (contrib/de.barton.ngircd.metainfo.xml).
+ - Don't send invalid CHANINFO commands when a channel has mode +k set but no
+ key is known to the server. This can happen with a misconfigured predefined
+ channel, for example, and looked like this: "CHANINFO #test +Pk 0 :" --
+ note the unset key represented by the two spaces. Fix this by sending a
+ "*" in this case and update the CHANINFO documentation, too.
+ - ngircd.spec: Fix names of README.md and INSTALL.md, add ".md" extension.
+ - Update description texts in the README.md file, the RPM and Debian package
+ files and the manual page: bring them in line with the updated homepage.
+ - Server-Server protocol: Fix use-after-free when unregistering a directly
+ connected server sending a SQUIT for itself.
+ - Server-Server protocol: Detect bogus SERVER commands lacking a prefix.
+ Thanks Hilko Bengen (hillu) for finding & reporting this as well for the
+ patch & pull request (even if fixed differently).
+ Closes #275.
+ - Fix the PING-PONG logic: In ngIRCd 26~rc1 this was completely broken (while
+ trying to fix timeouts during server handshakes in bigger networks): the
+ daemon never disconnected any stale peers but kept sending out PINGs over
+ and over again ...
+ - Test suite: Add missing files needed to test SSL support to "EXTRA_DIST",
+ so that they are included in distribution archives: in rc1, "make check"
+ fails when using sources from an archive and enabling SSL support.
+ Thanks to Hilko Bengen <bengen@hilluzination.de> for the patch!
+
+ ngIRCd 26~rc1 (2020-05-10)
+ - Tweak & update doc/HowToRelease.txt, .mailmap and AUTHORS files.
+ - Allow up to 512 characters per line in MOTD and help text files (but keep
+ in mind that lines can't get that long, because they have to be prefixed
+ before being sent to the client). But this allows for more fancy MOTDs :-)
+ Closes #271.
+ - Show the actually allowed channel types in the ISUPPORT(005) numeric which
+ are configured by the "AllowedChannelTypes" configuration variable.
+ Closes #273.
+ - Handle commands in the read buffer before reading more data and don't wait
+ for the network in this case: If there are more bytes in the read buffer
+ already than a single valid IRC command can get long (513 bytes), wait for
+ this/those command(s) to be handled first and don't try to read even more
+ data from the network (which most probably would overflow the read buffer
+ of this connection soon).
+ - Update Travis-CI configuration, "sudo" is deprecated.
+ - Log G-/K-Line changes only when not initiated by a server: this prevents
+ the log from becoming spammed during "net bursts".
+ - Update test suite to include SSL tests, including checking for reloading
+ certificates during runtime.
+ - Makefile.am: Replace "make" with "${MAKE}". This fixes warnings like this:
+ "warning: jobserver unavailable: using -j1. Add `+' to parent make rule."
+ Thanks to Sam James (sam_c) <sam@cmpct.info>!
+ Closes #270.
+ - Add support for GnuTLS certificate reload, which is quite handy when using
+ Let's Encrypt, for example. Until now this was only supported when linked
+ with OpenSSL. Thanks a lot, Hilko Bengen <bengen@hilluzination.de>!
+ - Remove deprecated legacy configuration options and related functions that
+ have been marked for removal for quite some time:
+ - PredefChannelsOnly (v22)
+ - NoticeAuth (v24)
+ - NoXXX (v19)
+ - Old '[GLOBAL]' section handling (v19)
+ Thanks to Michi <michi+ngircd@dataswamp.org> for the patch!
+ - Fix recursion bug on write errors: Depending on the stack size, too many
+ clients on the same channel quitting at the same time would trigger a crash
+ due to too many recursive calls to Conn_Close(). Thanks to Michi
+ <michi+ngircd@dataswamp.org> for the patch!
+ - Fix builds using GCC option -fno-common, which is the default starting with
+ GCC 10. Thanks to Michi <michi+ngircd@dataswamp.org> for the patch!
+ Closes #266.
+ - Convert INSTALL and README files to Markdown.
+ - Allow setting arbitrary channel modes in the configuration file by handling
+ them like in MODE commands, and allow multiple "Modes =" lines per [Channel]
+ section. Thanks to Michi <michi+ngircd@dataswamp.org>!
+ Closes #55.
+ - Add "FNC" (forced nick changes) to ISUPPORT(005) numeric. Most probably
+ this doesn't make any difference to any client, but it seems correct.
+ See <http://www.irc.org/tech_docs/005.html> for details.
+ - Reuse old SSL key if loading a new one failed.
+ - Remove outdated OpenBSD/NetBSD systrace.policy.
+ - Enhance handling of command line errors, and return with exit code 0 ("no
+ error") when "--help" or "--version" is used (which resulted in exit code 1,
+ "error" before). Exit with code 2 ("command line error") for all other
+ invalid command line options, and show the error message itself on stderr
+ (instead of stdout and exit code 1, "generic error", as before).
+ This new behavior is more in line with the GNU "coding standards",
+ see <https://www.gnu.org/prep/standards/html_node/_002d_002dhelp.html>.
+ - Fix and update Xcode project: Reference correct contrib/Makefile.am file,
+ correctly sort contrib/nglog.sh and add "ORGANIZATIONNAME" setting.
+ - contrib/ngindent.sh: Add more GNU indent options for better results, and
+ add the ".sh" suffix to bring this script in line with the others in the
+ contrib/ folder.
+ - Add ./contrib/nglog.sh: This script parses the log output of ngircd(8),
+ and colorizes the messages according to their log level. Example usage:
+ ngircd -f $PWD/doc/sample-ngircd.conf -np | ./contrib/nglog.sh
+ - Log received signals with their names using strsignal(3), when available.
+ - Make test suite compatible with Haiku OS.
+ - Fix host mask cloaking bug, don't cloak multiple times: Previously, each
+ server would cloak every user's host mask. The problem is that if a network
+ has more than one server, then a user's host mask would get cloaked twice.
+ This patch ensures that a server only cloaks the host mask if it has not yet
+ been cloaked (the period indicates it's still an IP address). Thanks to
+ JRMU <jrmu@lecturify.com> for the patch!
+ Closes #228.
+ - Enlarge buffers of info texts to 128 bytes. This includes:
+ - "Real name" of a client (4th filed of the USER command).
+ - Server info text ("Info" configuration option).
+ - Admin info texts and email address ("AdminInfo1", "AdminInfo2" and
+ "AdminEmail" configuration options).
+ - Network name ("Network" configuration option).
+ The limit was 64 bytes before ...
+ Closes #258.
+ - Streamline handling of invalid and unset server name: Don't exit during
+ runtime (REHASH command, HUP signal), because the server name can't be
+ changed in this case anyway and the new invalid name will be ignored.
+ - Fix and extend documentation: Fix some typos, fix syntax of LINKS and LIST
+ commands, whitespace and spelling fixes, update dependencies and add some
+ more information about IRCv3 support.
+ Thanks to Thanks Windree, Étienne Mollier <etienne.mollier@mailoo.org> and
+ Christoph Biedl <debian.axhn@manchmal.in-ulm.de>.
+ Closes #264.
+ - Slightly reorder startup steps, and enhance logging:
+ - Show name of configuration file at the beginning of start up.
+ - Add a message when ngIRCd is ready, including its host name.
+ - Show name of configuration file on REHASH (SIGHUP), too.
+ - Change level of "done message" to NOTICE, like "starting" & "ready".
+ - Initialize IO functions before channels, connections, clients, ...
+ - configure.ng: OpenSSL can depends on lz or latomic so use pkg-config to
+ find those dependencies and fallback to existing mechanism.
+ Closes #256.
+ - ngircd.conf.5: Fix wording as suggested by lintian.
+
+ngIRCd 25 (2019-01-23)
+
+ - Fix documentation of MotdPhrase length, which actually is 126 characters:
+ update sample configuration file as well as the man page. Thanks to
+ shankari <shankari@eecs.berkeley.edu>.
+ Closes #254.
+ - Implement new configuration option "MaxPenaltyTime", which configures the
+ maximum penalty time increase in seconds, per penalty event. Set to -1 for
+ no limit (the default), 0 to disable penalties altogether. ngIRCd doesn't
+ use penalty increases higher than 2 seconds during normal operation, so
+ values higher than 1 rarely make sense.
+ Disabling (or reducing) penalties can greatly speed up "make check" runs
+ for example, see below, but are mostly a debugging feature and normally
+ not meant to be used on production systems!
+ Some example timings running "make check" from my macOS workstation:
+ - MaxPenaltyTime not set: 4:41,79s
+ - "MaxPenaltyTime = 1": 3:14,71s
+ - "MaxPenaltyTime = 0": 25,46s
+ Closes #249 and #251.
+ - Fix compilation without deprecated OpenSSL APIs. Thanks to Rosen Penev
+ <rosenp@gmail.com> for the patch!
+ Closes #252.
+ - Update Xcode project for latest Xcode version (10.0)
+ - Fix some compiler warnings of Apple Xcode/Clang
+ - Allow a 5th parameter in WEBIRC. Thanks to "ItsOnlyBinary".
+ Closes #247.
+ - Update some more documentation files and source code comments.
+ - Platforms.txt: Add and update systems.
+
+ ngIRCd 25~rc1 (2018-08-11)
+ - Update config.guess (2018-03-08) and config.sub (2018-03-08) files.
+ - Correctly retry to establish an outgoing connections when forking of the
+ resolver sub-process failed (for example because of lack of free memory).
+ Until now, such a connection was never retried once this error was hit.
+ Thanks to Robert Obermeier for reporting this bug!
+ Closes #243.
+ - Fix a "use after free" bug which can be triggered on a newly established
+ connection when the daemon handles an ERROR command received from the peer
+ during client login. Thanks a lot to Joseph Bisch <joseph.bisch@gmail.com>
+ for discovering and reporting this issue!
+ - Only send TOPIC updates to a channel when the topic actually changed:
+ This prevents the channel from becoming flooded by unnecessary TOPIC update
+ messages, that can happen when IRC services try to enforce a certain topic
+ but which is already set (at least on the local server), for example.
+ Therefore still forward it to all servers, but don't inform local clients
+ (still update setter and timestamp information, though).
+ - Update Xcode project for latest Xcode version (9.2). This includes adding
+ missing and deleting obsolete file references.
+ - Handle user mode "C" ("Only users that share a channel are allowed to send
+ messages") like user mode "b" ("block private messages and notices"): allow
+ messages from servers, services, and IRC Operators, too. Change proposed by
+ "wowaname" back in 2015 in #ngircd, thanks!
+ - Fix some compiler warnings.
+ - Add contrib/ngircd.logcheck: Some sample logcheck(8) rules.
+ - Allow IRC Ops and remote servers to KILL service clients: such clients
+ behave like regular users, therefore IRC operators and servers should be
+ able to KILL them: for example to resolve nick collisions.
+ Closes #242.
+ - Don't forward KILLs to other servers if they've been blocked locally:
+ This prevents clients from killing IRC services, for example.
+ Closes #238 and #239.
+ - Fix a cross-compiler issue related to the Get_Error() function.
+ Closes #240 and #241.
+ - Update ./doc/Services.txt, enhance configuration examples.
+
+ngIRCd 24 (2017-01-20)
+
+ - Make sure that ./contrib/platformtest.sh aborts when ./autogen.sh fails.
+ - Update config.guess (2016-10-02) and config.sub (2016-11-04) files.
+ - Build Debian packages with OpenSSL instead of GnuTLS: OpenSSL allows
+ to reload used certificates on runtime for example (which is very
+ useful when using Let's Encrypt), and therefore is preferred. And
+ explicitly specify the "source format".
+ - Fix handling of connection pool allocation and enlargement: up to now,
+ the daemon only enlarged its connection pool when accepting new incoming
+ client or server connections, not when establishing new outgoing server
+ links, which could lead to problems when hitting the configured limit,
+ see "MaxConnections". Thanks to Lukas Braun (k00mi) for reporting this!
+ Closes #231.
+
+ ngIRCd 24~rc1 (2017-01-07)
+ - Enhance systemd service file, and install it in Debian package.
+ - Update configuration of Debian package.
+ - Log privilege violations and failed OPER request with log level "error"
+ and send it to the "&SERVER" channel, too.
+ - Immediately shut down connection when receiving an "ERROR" command,
+ don't wait for the peer to close the connection. This allows the daemon
+ to forward the received "ERROR" message in the network, instead of the
+ very generic "client closed connection" message.
+ - Fix sending of entry duration (no negative values!) when synchronizing
+ "x-lines" (G-LINES).
+ - List expiration (G-LINES): use same log level as when setting, and log
+ this event to the &SERVER channel, too.
+ - Explicitly forbid remote servers to modify "x-lines" (G-LINES) when the
+ "AllowRemoteOper" configuration option isn't set, even when the command
+ seems to originate from the remote server itself: this prevents GLINE's
+ to become set during server handshake in this case (what wouldn't be
+ possible during regular runtime when a remote IRC Op sends the command)
+ and what can't be undone by IRC Ops later on (because of the missing
+ "AllowRemoteOper" option) ...
+ - Make scripts and init-files in ./contrib executable.
+ - Fix building ngIRCd with OpenSSL 1.1. Thanks to Christoph Biedl
+ <ngircd.anoy@manchmal.in-ulm.de> for the patch!
+ - Fix code indentation warnings of gcc 6.2.
+ - Update config.guess (2016-04-02) and config.sub (2016-03-30) files.
+ - Fix warnings of the "shellcheck" linter in autogen.sh, contrib/ngindent
+ and contrib/platformtest.sh.
+ - Update Xcode project for latest Xcode version (8.0), and fix "duplicate
+ symbols" error messages when building (linking) the binary.
+ - Add "Documentation" variables to systemd configuration files.
+ - Make sure that SYSCONFDIR is always set, which can be handy when
+ using source code linters when ./configure hasn't been run already.
+ - Add the new "PAMServiceName" configuration option to specify the name
+ used as PAM service name. This setting allows to run multiple ngIRCd
+ instances with different PAM configurations for each instance.
+ Thanks to Christian Aistleitner <christian@quelltextlich.at> for the
+ patch, closes #226.
+ - Add an ".editorconfig" file to the project.
+ - Travis-CI: use "container-based infrastructure".
+ - Limit the number of message targets, and suppress duplicates: This
+ prevents an user from flooding the server using commands like this:
+ "PRIVMSG nick1,nick1,nick1,...".
+ Duplicate targets are suppressed silently (channels and clients).
+ In addition, the maximum number of targets per PRIVMSG, NOTICE, ...
+ command are limited to MAX_HNDL_TARGETS (25). If there are more, the
+ daemon sends the new 407 (ERR_TOOMANYTARGETS_MSG) numeric, containing
+ the first target that hasn't been handled any more. Closes #187.
+ - Test suite: Add new test for server-server logins.
+ - contrib/ngindent: Fix shebang line.
+ - Make contrib/platformtest.sh script more portable, and only show
+ "runs=Y" when the test suite really has been passed successfully.
+ - Code cleanup in the NJOIN handler and the function killing clients as
+ well as the function sending messages to a "mask" (cleaner code, more
+ fault tolerant, better code comments).
+ - Update and enhance documentation: README file, doc/Platforms.txt,
+ doc/Modes.txt, doc/Commands.txt, doc/PAM.txt.
+ - Fix NJOIN not propagating "half ops" status: ngIRCd tested for the wrong
+ prefix of "half ops" when processing NJOIN commands and therefore never
+ classified a remote user as "half op".
+ Thanks to wowaname for pointing this out on #ngircd!
+
+ngIRCd 23 (2015-11-16)
+
+ - Explicitly cast time_t to long when printing it out: this prevents
+ wrong sized data types on platforms where time_t doesn't equal a
+ long any more, for example on OpenBSD (which would result in garbled
+ output on those platforms).
+ - contrib/Debian/changelog: Fix email address.
+ - Documentation: Spelling fixes; update doc/Platforms.txt.
+
+ ngIRCd 23~rc1 (2015-09-06)
+ - Add ".clang_complete" file, which is used by the "linter-clang" package
+ of the Atom editor, for example.
+ - Make server-to-server protocol more robust: ngIRCd now catches more
+ errors on the server-to-server (S2S) protocol that could crash the
+ daemon before. This hasn't been a real problem because the IRC S2S
+ protocol is "trusted" by design, but the behavior is much better now.
+ Thanks to wowaname on #ngircd for pointing this out!
+ - Make platformtest.sh, autogen.sh, and ngircd.init more portable.
+ - Enables "reproducible builds" for ngIRCd: Use the optional BIRTHTIME
+ constant while building ngIRCd, which contains a time stamp for the
+ "Birth Date" information, in seconds since the epoch.
+ See <https://wiki.debian.org/ReproducibleBuilds>.
+ - Update "contrib/ngircd.service" file for systemd.
+ - INSTALL: Add deprecation notice for "PredefChannelsOnly" variable.
+ - Use "NOTICE *" before registration instead of "NOTICE AUTH". "AUTH" is
+ a valid nickname so sending notices to it is probably not a good idea.
+ Use "*" as the target instead as done with numerics when the nick is not
+ available. This mimics the behavior in Charybdis, IRCD-Hybrid, InspIRCd
+ 2.2, Plexus 4, etc. Closes #217.
+ The "NoticeAuth" configuration variable (ngircd.conf) has been renamed
+ to "NoticeBeforeRegistration" accordingly, but the old name is still
+ supported for compatibility reasons.
+ - Implement new channel mode "N" (regular users can't change their nick
+ name while on this channel). Closes #214.
+ - README, AUTHORS: Update mailing list and issue tracker URLs.
+ - Remove doc/GIT.txt (it is outdated), update doc/Contributing.txt:
+ ngIRCd uses GitHub, and Git itself is quite common today. So don't
+ include an own Git "mini HowTo" any longer.
+ - Specify session context for OpenSSL clients. This enables some OpenSSL
+ clients, including Pidgin and stunnel 5.06, to reuse a session.
+ Patch by Tom Ryder <tom@sanctum.geek.nz>, thanks! Closes #182.
+ - Keep track of who placed bans, invites, and excepts.
+ Idea and implementation by LucentW, Thanks! Closes #203.
+ - Make setgroups(3) function optional: For example, Interix is missing
+ this function, which prevented ngIRCd to build on this platform. When
+ setgroups(3) isn't available, a warning message is issued on startup.
+ - Implement numeric RPL_LISTSTART(321). lightIRC and other clients
+ expecting RPL_LISTSTART should now behave correctly.
+ Idea and implementation by LucentW, Thanks! Closes #207.
+ - Update ngircd.conf.5: "CloakUserToNick" hides user _and_ real name.
+ This closes #208.
+ - Fix case insensitive pattern matching: Up to now, only the input
+ string became lowercased and was then compared to the pattern -- which
+ failed when the pattern itself wasn't all lowercase!
+ - Streamline the effect of "MorePrivacy" option: Update documentation
+ in ngircd.conf(5); don't hide channels for IRC Ops on LIST and don't
+ hide IP addresses/hostnames on WHOIS when "MorePrivacy" is in effect.
+ This closes #198.
+ - IRC operators now can kick anyone when "OperCanMode" is set.
+ Idea and implementation by LucentW, Thanks! Closes #202.
+ - Implement user mode "I": Hide channels on WHOIS: this mode prevents
+ ngIRCd from showing channels on WHOIS (IRC Operators can always see
+ the channel list).
+ Idea and implementation by LucentW, Thanks! Closes #197.
+ - INVITE command: Implement ERR_USERNOTONSERV(504) numeric and make sure
+ that the target user is on the same server when inviting other users
+ to local ("&") channels.
+ Idea by Cahata, thanks! Closes #183.
+ - INVITE command: Enforce 1 second penalty time, which prevents flooding
+ of the target client.
+ This closes #186. Reported by Cahata, thanks!
+ - MODE command: Always report channel creation time. Up to now when
+ receiving a MODE command, ngIRCd only reported the channel creation
+ time to clients that were members of the channel. This patch reports
+ the channel creation time to all clients, regardless if they are joined
+ to that channel or not. At least ircd-seven behaves like this.
+ This closes #188. Reported by Cahata, thanks!
+ - Update Xcode project for latest Xcode version (6.3).
+
+ngIRCd 22.1 (2015-04-06)
+
+ - Update doc/Platforms.txt and doc/FAQ.txt.
+ - Fix spelling of RPL_WHOISBOT message text.
+ - Don't send nick name as default PART reason: No other IRC daemon seems
+ to do this (today?). Closes #185.
+ Reported by Cahata in #ngircd, thanks!
+ - Fix "WHO #<chan>" showing invisible users and hiding all visible, the
+ logic was reversed! This bug has been introduced by commit c74115f2,
+ "Simplify mode checking on channels and users within a channel", ngIRCd
+ releases 21, 21.1, and 22 are affected :-( Problem reported by Cahata
+ in #ngircd, Thanks!
+ - Fix typo in src/testsuite/README
+ - Auth PING: Fix our information text for manual sending of "PONG". Up to
+ now, ngIRCd doesn't send a valid IRC command at all, oops!
+ - Auth PING: Fix internal time stamp conversion and don't send a prefix in
+ our PING command. The prefix confuses WeeChat, at least, which doesn't
+ send an appropriate PONG in the case ...
+ Debugging and patch by "wowaname" on #ngircd, thanks!
+ - Fix syntax of ERR_LISTFULL_MSG(478) numeric. Pointed out by "wowaname"
+ in #ngircd, thanks!
+ - Enhance debug messages while sending CHANINFO commands.
+ - Reset "last try" timer when enabling a passive server. This results in
+ a new connection attempt as soon as possible.
+ - Change log message for "Can't resolve address" and for IP address
+ forgeries.
+ - doc/HowToRelease.txt: Add note about the bug tracker.
+ - Update "CipherList" to not enable SSLv3 by default. Idea, initial patch,
+ and testing by Christoph Biedl <ngircd.anoy@manchmal.in-ulm.de>.
+ - Change ngIRCd test suite not to use DNS lookups: Different operating
+ systems do behave quite differently when doing DNS lookups, for example
+ "127.0.0.1" sometimes resolves to "localhost" and sometimes to
+ "localhost.localdomain" (for example OpenBSD). And other OS resolve
+ "localhost" to the real host name (for example Cygwin). So not using
+ DNS at all makes the test site much more portable.
+
+ngIRCd 22 (2014-10-11)
+
+ - Match all list patterns case-insensitive: this affects the invite-,
+ ban-, and except lists, as well as G-Lines an K-Lines.
+ Problem pointed out by "wowaname" on #ngircd, thanks!
+
+ ngIRCd 22~rc1 (2014-09-29)
+ - Sync "except lists" between servers: Up to now, ban, invite, and G-Line
+ lists have been synced between servers while linking -- but obviously
+ nobody noticed that except list have been missing ever since. Until now.
+ Thanks to "j4jackj", who reported this issue in #ngircd.
+ - Allow longer user names (up to 63 characters) for authentication.
+ - Correctly check that a server has a valid hostname and port, thanks to
+ David Binderman <dcb314@hotmail.com> who reported this bug.
+ - Fix the function which generates complete "IRC masks" from user input,
+ don't destroy the source buffer and use all provided parts (nick, user,
+ host name). This fixes GLINEs/KLINEs from not working in some situations.
+ - Increase MAX_SERVERS from 16 to 64: There are installations out there
+ that would like to configure more than 16 links per server, so increase
+ this limit. Best would be to get rid of MAX_SERVERS altogether and make
+ if fully dynamic, but start with this quick and dirty hack ...
+ - Debian: Don't adjust path names that are correct by default and correctly
+ set and use "docdir".
+ - Update config.guess and config.sub to recent versions.
+ - Test suite/platformtest.sh: Detect when tests have been skipped.
+ - doc/Bopm.txt: Update "connregex" and "kline" for current ngIRCd.
+ - Allow "DefaultUserModes" to set all possible modes, including modes only
+ settable by IRC Operators.
+ - Spoofed prefixes: Really kill connection on non-server links.
+ - Implement user mode "F": "relaxed flood protection". Clients with mode
+ "F" set are allowed to rapidly send data to the daemon. This mode is only
+ settable by IRC Operators and can cause problems in the network -- so be
+ careful and only set it on "trusted" clients!
+ User mode "F" is used by Bahamut for this purpose, for example.
+ - Handle "throttling" in a single function: ngIRCd implements "command
+ throttling" and "bps throttling" (bytes per second). The states are
+ detected in different functions, Conn_Handler() and Read_Request(), but
+ handle the actual "throttling" in a common function: this enables us to
+ guarantee consistent behavior and to disable throttling for special
+ connections in only one place
+ - Use server password when PAM is compiled in but disabled.
+ - Streamline punctuation of log messages.
+ - Return ISUPPORT(005) numerics on "VERSION". This is how ircd-seven,
+ Charybdis, Hybrid, and InspIRCd behave, for example.
+ - configure: Only link "contrib/Debian" if it exists, which isn't the case
+ on "VPATH builds", for example.
+ - Show the account name in WHOIS. This uses the same numeric as Charybdis
+ and ircu families: WHOISLOGGEDIN(330).
+ - Pattern matching: Remove "range matching" in our pattern matching code
+ using the "[...]" syntax, because [ and ] are valid characters in nick
+ names and one has to quote them currently using the "\" character, which
+ is quite unexpected for users.
+ - platformtest.sh: New option "-x", don't regenerate build system and
+ allow using separate source and build trees.
+ - Test suite: explicitly enable glibc memory checking.
+ - Make "MODE -k" handling more robust and compatible, send "fake '*' key"
+ in all replies.
+ - Update configure.ng: ngIRCd requires GNU autoconf 2.61 for generating its
+ build system, so update the build system accordingly and implement all
+ changes that autoupdate(1) suggests: Update AC_PREREQ and AC_INIT, use
+ AC_LINK_IFELSE, AC_RUN_IFELSE, and AC_COMPILE_IFELSE, and remove
+ AC_TYPE_SIGNAL (we don't use RETSIGTYPE).
+ - portabtest: Actually test the functions snprintf(), strlcpy(), strlcat(),
+ and vsnprintf() for correctness, not only existence (which was quite
+ useless, because if they weren't available, the program could not have
+ been linked at all ...).
+ - Implement new configuration option "Network": it is used to set the
+ (completely optional) "network name", to which this instance of the
+ daemon belongs. When set, this name is used in the ISUPPORT(005) numeric
+ which is sent to all clients connecting to the server after logging in.
+ - Update doc/Platforms.txt.
+ - Various code cleanups, remove unused code, streamline error handling.
+ Remove all imp.h and exp.h header files, support non-standard vsnprintf()
+ return codes, and fix some K&R C portability issues. Streamline
+ DEBUG_ARRAY, DEBUG_BUFFER, DEBUG_IO, DEBUG_ZIP definitions.
+ - Increase penalty time to 10 seconds when handling OPER commands with an
+ invalid password.
+
+ngIRCd 21.1 (2014-03-25)
+
+ - Don't ignore but use the server password when PAM is compiled in but
+ disabled. Thanks to Roy Sindre Norangshol <roy.sindre@norangshol.no>!
+ - doc/Platforms.txt: Update from master branch.
+ - Really kill connections that send "spoofed prefixes" on non-server links.
+ This fixes commit 6cbe1308 which only killed the connection when the
+ spoofed prefix itself belonged to a non-server client.
+ - CHARCONV command: Fix handling conversion errors, don't overwrite already
+ converted text!
+ - doc/Services.txt: Update information for Anope 2.x.
+ - Correctly use cloaked IRC masks on "INVITE nickname": The cloaked IRC mask
+ of a user is his visible mask, so the daemon has to use it for generating
+ the "one time" entries for the invite list of the given channel, and not
+ the "real" mask which will never match while the target client is "+x", and
+ even worse, will disclose the real mask on "MODE #channel +I" commands :-/
+ Bug reported by Cahata on #ngircd, thanks!
+ - configure: Only link "contrib/Debian" if it exists. This isn't the case on
+ "VPATH builds", for example.
+ - Use $(MKDIR_P) instead of $(mkinstalldirs) in Makefile's and test for
+ "mkdir -p" using AC_PROG_MKDIR_P in "configure".
+ - Fix configure script and "make check" for TCP Wrappers (problems spotted on
+ OpenBSD): add missing #include's and static variables, and add libwrap at
+ the end of the configure run because if libwrap becomes added earlier,
+ other tests may fail.
+ - configure: add support for the LDFLAGS_END and LIBS_END variables to add
+ linker flags and libraries at the end of the configure run (CFLAGS_END has
+ been implemented already).
+ - platformtest.sh and Makefile.am: Don't use "test -e", it isn't portable.
+ - Update Copyright notices for 2014 :-)
+ - Fix permanent {G|K}LINES (with a timeout of 0 seconds).
+ - WEBIRC: Don't set the hostname received by the WEBIRC command when DNS
+ lookups are disabled, but use the IP address instead.
+ Reported by Toni Spets <toni.spets@iki.fi>, thanks!
+ - Check for working getaddrinfo() function: At least AIX 4.3.3 and 5.1 have a
+ broken implementation of getaddrinfo() which doesn't handle "0" as numeric
+ service correctly. This patch adds a configure check for this case and
+ changes all calling functions to only use getaddrinfo() if it "works".
+ See <http://www.stacken.kth.se/lists/heimdal-discuss/2004-05/msg00059.html>
+ - Only use the unsetenv() function when it is available (AIX 4.3 doesn't
+ support it, for example).
+ - Make sure that the source code is still compatible with the "ansi2knr" tool
+ and builds using non-ANSI K&R C compilers. Tested with Apple C on A/UX.
+ - Fix building ngIRCd without support for ZLIB compression. Reported by
+ "der_baer" on #ngircd, thanks!
+
+ngIRCd 21 (2013-10-30)
+
+ - ./contrib/Debian/ngircd.init: Make sure no stale PID file is left over
+ when (re-)starting ngIRCd.
+ - Change ./contrib/platformtest.sh and update ./doc/Platforms.txt to
+ allow user names up to 8 characters.
+ - Call arc4random_stir() in forked subprocesses, when available. This
+ is required by FreeBSD <10 and current NetBSD at least to correctly
+ initialize the "arc4" random number generator on these platforms.
+ - Update our own Debian package configuration and fix the default path
+ of the "HelpFile" of the "full" package variants.
+
+ ngIRCd 21~rc2 (2013-10-20)
+ - Report the correct configuration file name on configuration errors,
+ support longer configuration lines, and warn when lines are truncated.
+ - Use arc4random() function to generate "random" numbers, when available.
+ - platformtest.sh: Detect clang compiler, and clean up GIT source tree
+ before building (when possible).
+ - Update (date of) manual pages.
+ - Update "Upgrade Information" in INSTALL file, add more systems to
+ doc/Platforms.txt, and fix spelling in NEWS and ChangeLog files =:)
+ - Fix remaining compiler warnings on OpenBSD.
+
+ ngIRCd 21~rc1 (2013-10-05)
+ - Actually KILL clients on GLINE/KLINE. (Closes bug #156)
+ - Adjust log messages for invalid and spoofed prefixes, which cleans up
+ logging of commands related to already KILL'ed clients. And don't
+ forward KILL commands for (already) unknown clients any more to prevent
+ unnecessary duplicates.
+ - Add support to show all user links using the "STATS L" (uppercase)
+ command (restricted to IRC Operators).
+ - Fixed blocking of server reconnects in some error configurations.
+ - Don't ignore SSL-related errors during startup any more: abort startup
+ when SSL is requested by the configuration but can't be initialized and
+ don't continue only listening on plain text communication ports.
+ (Closes bug #163)
+ - Implement configurable SSL cipher list selection for GnuTLS and OpenSSL
+ using the new configuration option "CipherList". In addition, this
+ changes the defaults to more secure values: "HIGH:!aNULL:@STRENGTH" for
+ OpenSSL, and "SECURE128" for GnuTLS.
+ - Fix "TRACE": Correctly return ERR_NEEDMOREPARAMS(461) (which basically
+ is "syntax error") when there are too many parameters.
+ - Clean up lots of permission and parameter checks in functions handling
+ IRC commands; and more consistently add penalty times on errors.
+ - Fix error numeric of WHOIS when no nick name has been provided:
+ as per RFC it should be ERR_NONICKNAMEGIVEN(431).
+ - Only log "IDENT ... no result" messages when an IDENT looked took place
+ and didn't return any data, not when IDENT has been disabled.
+ - Show connection flag "s" (SSL) in RPL_TRACE{LINK|SERVER} messages: now
+ you can check if a server-to-server link is SSL-encrypted or not using
+ the IRC "TRACE" command.
+ - Correctly discard supplementary groups on server startup.
+ - Save client IP address text for "WebIRC" users and correctly display
+ it on WHOIS, for example. (Closes bug #159)
+ - Implement the new configuration option "DefaultUserModes" which lists
+ user modes that become automatically set on new local clients right
+ after login. Please note that only modes can be set that the client
+ could set on itself, so you can't set "a" (away) or "o" (IRC Op),
+ for example! User modes "i" (invisible) or "x" (cloaked) etc. are
+ "interesting", though. (Closes bug #160)
+ - Add support for the new METADATA "account" property, which allows
+ services to automatically identify users after netsplits and across
+ service restarts.
+ - Enforce "penalty times" on error conditions more consistently and in
+ more places. Now most error codes sent back from the IRC server to the
+ client should result in a 2 second "penalty".
+ - Implement a new configuration option "AllowedChannelTypes" that lists
+ all allowed channel types (channel prefixes) for newly created channels
+ on the local server. By default, all supported channel types are allowed.
+ If set to the empty string, local clients can't create new channels at
+ all, which equals the old "PredefChannelsOnly = yes" setting.
+ This change deprecates the "PredefChannelsOnly" variable, too, but it is
+ still supported and translated to the appropriate "AllowedChannelTypes"
+ setting. When the old "PredefChannelsOnly" variable is processed, a
+ warning message is logged. (Closes bug #152)
+ - Add support for "client certificate fingerprinting". When a client
+ passes an SSL certificate to the server, the "fingerprint" will be
+ forwarded in the network which enables IRC services to identify the
+ user using this certificate and not using passwords.
+ - IRC Operator names, as defined in ngircd.conf, are logged now when
+ handling successful OPER commands.
+ - Some error conditions while handling IRC commands, like "permission
+ denied" or "need more parameters", result in more penalty times.
+ - The numeric replies of some commands became split too early which
+ resulted in more numeric reply lines than necessary.
+ - Implement a new configuration option "IncludeDir" in the "[Options]"
+ section that can be used to specify a directory which can contain
+ further configuration files and configuration file snippets matching
+ the pattern "*.conf". These files are read in after the main server
+ configuration file ("ngircd.conf" by default) has been read in and
+ parsed. The default is "$SYSCONFDIR/ngircd.conf.d", so that it is
+ possible to adjust the configuration only by placing additional files
+ into this directory. (Closes bug #157)
+ - Fix use-after-free in the Lists_CheckReason() function, which is used
+ to check if a client is a member of a particular ban/invite/... list.
+ - Xcode: fix detection of host OS, vendor, and CPU type, and update
+ project settings for Xcode 5.
+ - OS X PackageMaker: use relative path names in project files and package
+ with correct file permissions (requires root privileges on "make").
+ - Add Travis-CI configuration file (".travis.yml") to project.
+ - Look for possible cloaked Masks in Lists. Users with +x user mode can
+ be banned with their cloaked hostname now.
+ - Don't read SSL client data before DNS resolver is finished which could
+ have resulted in discarding the resolved client hostname and IDENT
+ reply afterwards, because in some situations (timing dependent) the
+ NICK and USER commands could have already been read in from the client,
+ stored in the buffer, and been processed.
+ Thanks to Julian Brost for reporting the issue and testing, and to
+ Federico G. Schwindt <fgsch@lodoss.net> for helping to debug it!
+ - Increase password length limit to 64 characters. (Closes bug #154)
+ - doc/Services.txt: Update Anope status and URL.
+ - Clean up Xcode project file, remove outdated files, add missing ones.
+ - Update Doxygen configuration file.
+ - configure: search for iconv_open as well as libiconv_open, because
+ on some installations iconv_open() is actually libiconv_open().
+ iconv_open() is the glibc version while libiconv_open() is the
+ libiconv version, now both variants are supported. (Closes bug #151)
+ - ngIRCd now accepts user names including "@" characters, saves the
+ unmodified name for authentication but stores only the part in front
+ of the "@" character as "IRC user name". And the latter is how
+ ircd2.11, Bahamut, and irc-seven behave as well. (Closes bug #155)
+ - Lots of IRC "information functions" like ADMIN, INFO, ... now accept
+ server masks and names of connected users (in addition to server names)
+ for specifying the target server of the command. (Closes bug #153)
+ - Implement a new configuration option "IdleTimeout" in the "[Limits]"
+ section of the configuration file which can be used to set a timeout
+ in seconds after which the whole daemon will shutdown when no more
+ connections are left active after handling at least one client.
+ The default is 0, "never".
+ This can be useful for testing or when ngIRCd is started using "socket
+ activation" with systemd(8), for example.
+ - Implement support for systemd(8) "socket activation".
+ - contrib/README: add description for more files.
+ - Enable WHOIS to display information about IRC Services using the new
+ numeric 310(RPL_WHOISSERVICE) This numeric is used for this purpose by
+ InspIRCd, for example -- but as usual, other numerics are in use, too,
+ like 613 in UltimateIRCd ...
+ Please note that neither the Operator (+o) not the "bot status" (+B)
+ of an IRC service is displayed in the output.
+ - Exit message: use singular & plural :-)
+ - autogen.sh: Check for autoconf/automake wrapper scripts
+ - Add missing punctuation marks in log messages, adjust some severity
+ levels, and make SSL-related messages more readable.
+ - AUTHORS file: Update list of contributors.
+ - Update systemd(8) example configuration files in ./contrib/ directory:
+ the "ngircd.service" file now uses the "forking" service type which
+ enhances the log messages shown by "systemctl status ngircd.service",
+ and the new "ngircd.socket" file configures a systemd socket that
+ configures a socket for ngIRCd and launches the daemon on demand.
+ - Enhance help system and the HELP command: now a "help text file" can be
+ set using the new configuration option "HelpFile" ("global" section),
+ which is read in and parsed on server startup and configuration reload,
+ and then is used to output individual help texts to specific topics.
+ Please see the file ./doc/Commands.txt for details.
+
+ngIRCd 20.3 (2013-08-23)
+
+ - Security: Fix a denial of service bug (server crash) which could happen
+ when the configuration option "NoticeAuth" is enabled (which is NOT the
+ default) and ngIRCd failed to send the "notice auth" messages to new
+ clients connecting to the server (CVE-2013-5580).
+
+ngIRCd 20.2 (2013-02-15)
+
+ - Security: Fix a denial of service bug in the function handling KICK
+ commands that could be used by arbitrary users to crash the daemon
+ (CVE-2013-1747).
+ - WHO command: Use the currently "displayed hostname" (which can be cloaked!)
+ for hostname matching, not the real one. In other words: don't display all
+ the cloaked users on a specific real hostname!
+ - configure: The header file "netinet/in_systm.h" already is optional in
+ ngIRCd, so don't require it in the configure script. Now ngIRCd can be
+ built on Minix 3 again :-)
+ - Return better "Connection not registered as server link" errors: Now ngIRCd
+ returns a more specific error message for numeric ERR_NOTREGISTERED(451)
+ when a regular user tries to use a command that isn't allowed for users but
+ for servers.
+ - Don't report ERR_NEEDMOREPARAMS(461) when a MDOE command with more modes
+ than nicknames is handled, as well as for channel limit and key changes
+ without specifying the limit or key parameters.
+ This is how a lot (all?) other IRC servers behave, including ircd2.11,
+ InspIRCd, and ircd-seven. And because of clients (tested with Textual and
+ mIRC) sending bogus MODE commands like "MODE -ooo nick", end-users got the
+ expected result as well as correct but misleading error messages ...
+ - Correctly detect when SSL subsystem must be initialized and take
+ outgoing connections (server links!) into account, too.
+ - autogen.sh: Enforce serial test harness on GNU automake >=1.13. The
+ new parallel test harness which is enabled by default starting with
+ automake 1.13 isn't compatible with our test suite.
+ And don't use "egrep -o", instead use "sed", because it isn't portable
+ and not available on OpenBSD, for example.
+
+ngIRCd 20.1 (2013-01-02)
+
+ - Allow ERROR command on server and service links only, ignore them and
+ add a penalty time on all other link types.
+ - Enforced mode setting by IRC Operators: Only check the channel user
+ modes of the initiator if he is joined to the channel and not an IRC
+ operator enforcing modes (which requires the configuration option
+ "OperCanUseMode" to be enabled), because trying to check channel user
+ modes of a non-member results in an assertion when running with debug
+ code or could crash the daemon otherwise. This closes bug #147, thanks
+ to James Kirwill <james.kirwill@bk.ru> for tracking this down!
+ - Fix build system to cope with spaces in path names.
+ - Code cleanups, mostly to fix build warnings on Cygwin.
+
+ngIRCd 20 (2012-12-17)
+
+ - Allow user names ("INDENT") up to 20 characters when ngIRCd has not
+ been configured for "strict RFC mode". This is useful if you are using
+ external (PAM) authentication mechanisms that require longer user names.
+ Patch suggested by Brett Smith <brett@w3.org>, see
+ <http://arthur.barton.de/pipermail/ngircd-ml/2012-October/000579.html>.
+
+ ngIRCd 20~rc2 (2012-12-02)
+ - Rework cloaked hostname handling and implement the "METADATA cloakhost"
+ subcommand: Now ngIRCd uses two fields internally, one to store the
+ "real" hostname and one to save the "cloaked" hostname. This allows
+ "foreign servers" (aka "IRC services") to alter the real and cloaked
+ hostnames of clients without problems, even when the user itself issues
+ additional "MODE +x" and "MODE -x" commands.
+ - RPL_UMODEIS: send correct target name, even on server links.
+ - Update platformtest.sh to follow autoconf changes and only generate
+ the "configure" script when it is missing.
+ - Fix the test suite to correctly execute test scripts even when stdout
+ is redirected.
+ - Fix some compiler warnings on NetBSD and OpenBSD.
+
+ ngIRCd 20~rc1 (2012-11-11)
+ - Update doc/Services.txt: describe the upcoming version of Anope 1.9.8,
+ then including a protocol module for ngIRCd. And remove our own patches
+ in ./contrib/Anope because they aren't supported any more ...
+ - Implement new "METADATA" command which can be used by remote servers
+ and IRC services to update client metadata like the client info text
+ ("real name"), user name, and hostname, and use this command to
+ configure an cloaked hostname (user mode "+x") on remote servers:
+ This prevents "double cloaking" of hostnames and even cloaked
+ hostnames are in sync on all servers supporting "METADATA" now.
+ - Fix error message when trying to join non-predefined channels and the
+ "PredefChannelsOnly" configuration option is set.
+ - Implement new IRC "SVSNICK" command to allow remote servers (and IRC
+ services) to change nicknames of already registered users. The SVSNICK
+ command itself doesn't change the nickname, but it becomes forwarded
+ to the server to which the user is connected to. And then this server
+ initiates the real nickname changing using regular NICK commands.
+ This allows to run mixed networks with old servers not supporting the
+ SVSNICK command, because SVSNICK commands for nicknames on such servers
+ are silently ignored and don't cause a desynchronization of the network.
+ - Make server reconnect time a little bit more random, so that two
+ servers trying to connect to each other asynchronously don't try this
+ in exactly the same time periods and kick each other off ...
+ - Don't accept connections for servers already being linked: there was a
+ time frame that could result in one connection overwriting the other,
+ e. g. the incoming connection overwriting the status of the outgoing
+ one. And this could lead to all kind of weirdness (even crashes!) later
+ on: now such incoming connections are dropped.
+ - New configuration option "MaxListSize" to configure the maximum number
+ of channels returned by a LIST command. The default is 100, as before.
+ - Implement user mode "b", "block messages": when a user has set mode "b",
+ all private messages and notices to this user are blocked if they don't
+ originate from a registered user, an IRC Op, server or service. The
+ originator gets an error numeric sent back in this case,
+ ERR_NONONREG_MSG (486), which is used by UnrealIRCd, too. (Closes #144)
+ - WHOIS: Not only show RPL_WHOISHOST_MSG to local IRC operators, but show
+ it to all IRC operators in the network. And don't show it to anybody if
+ the "more privacy" configuration option is enabled. (Closes #134)
+ - Test suite: make expect scripts more verbose displaying dots for each
+ reply of the server that it is waiting for.
+ - WHOIS: Implement numeric RPL_WHOISMODES_MSG (379) and show user modes in
+ the reply of the WHOIS command for the user himself or, if MorePrivacy
+ isn't set, for request initiated by an IRC operator. (Closes #129)
+ - Implement channel mode "V" (invite disallow): If the new channel mode
+ "V" is set, the INVITE command becomes invalid and all clients get the
+ new ERR_NOINVITE_MSG (518) reply. (Closes #143)
+ - KICK-protect IRC services.
+ - Implement channel mode "Q" and user mode "q": Both modes protect users
+ from channel kicks: only IRC operators and servers can kick users having
+ mode "q" or in channels with mode "Q". (Closes #141)
+ - Debian: require "telnet" or "telnet-ssl" for building and enable
+ CHARCONV in ngircd-full[-dbg] variants.
+ - Send RPL_REHASHING (382) numeric if a REHASH command was accepted.
+ - Fix spelling and variable names in some log messages.
+ - Allow users to "cloak" their hostname only when the configuration
+ variable "CloakHostModeX" (introduced in 19.2) is set. Otherwise, only
+ IRC operators, other servers, and services are allowed to set the user
+ mode "+x": this prevents regular users from changing their hostmask to
+ the name of the IRC server itself, which confused quite a few people ;-)
+ (Closes #133)
+ - New configuration option "OperChanPAutoOp": If disabled, IRC operators
+ don't become channel operators in persistent channels when joining.
+ Enabled by default, which has been the behavior of ngIRCd up to this
+ patch. (Closes #135)
+ - Allow IRC operators to see secret (+s) channels in LIST command as long
+ as the "MorePrivacy" configuration option isn't enabled in the
+ configuration file. (Closes #136)
+ - Enhance build system: Support new (>=1.12) and old (<=1.11) GNU automake
+ versions, update checks for required and optional features, enable
+ colored test output of automake (if available), rename configure.in to
+ more modern configure.ac, include .mailmap and all build-system files in
+ distribution archives and no longer require a GIT tree to detect the
+ correct version string.
+ - Update documentation: add doc/Contributing.txt and include version
+ numbers in doc/Modes.txt.
+ - Free all listen ports on initialization: now listen ports can be
+ reconfigured on runtime using a configuration reload.
+ - Initialize SSL when needed only, and disable SSL on errors.
+ - Implement new (optional) IRC+ "CHARCONV" command to set a client
+ character set that the server translates all messages to/from UTF-8.
+ This feature requires the "libiconv" library and must be enabled using
+ the new "--with-iconv" option of the ./configure script. See
+ doc/Protocol.txt for details. (Closes #109)
+ - Allow limited punctuation in usernames, for better PAM integration.
+ - Correctly re-initialize signal handlers on RESTART commands.
+ - Show a warning on startup if the configuration file is not a full path:
+ ngIRCd is a long-running process and changes its working directory to
+ "/" to not block mounted filesystems and the like when running as daemon
+ ("not in the foreground"); therefore the path to the configuration file
+ must be relative to "/" (or the chroot() directory), which basically is
+ "not relative", to ensure that "kill -HUP" and the "REHASH" command work
+ as expected later on. (Closes #127)
+ - Make the "&SERVER" channel definable in a [Channel] configuration block,
+ which enables server operators to overwrite the built-in topic and
+ channel modes. (Closes #131)
+ - Don't limit list size of "WHO #channel" commands, because it makes no
+ sense to not return all the users in that channel, so I removed the
+ check. But if there are more than MAX_RPL_WHO(25) replies, the client
+ requesting the list will be "penalized" one second more, then 2 in
+ total. (Closes #125)
+ - Make ngIRCd buildable using the kqueue() IO interface on FreeBSD 4.x.
+ - Fix the "NoticeAuth" configuration option when using SSL connections and
+ enhance the message to show the hostname and IDENT reply of the client.
+ - Introduce numeric RPL_HOSTHIDDEN_MSG (396): This numeric is sent to the
+ client each time it changes its displayed hostname using "MODE +/-x",
+ and if "CloakHost" is set right after the MOTD has been sent.
+ - Fix USERHOST not displaying the correctly cloaked hostname.
+ - Implement user mode "B" ("Bot flag"): it is settable and unsettable by
+ every (non-restricted) client. This is how Unreal and InspIRCd do
+ behave, and so do we :-)
+ - Dynamically allocate memory for connection passwords: This a) saves
+ memory for clients not using passwords at all and b) allows for
+ "arbitrarily" long passwords.
+ - Implement channel mode "M": Only the server, identified users and IRC
+ operators are able to talk in such a channel.
+ - Block nicknames that are reserved for services and are defined using the
+ configuration variable "ServiceMask" in "Server" blocks; And this
+ variable now can handle more than one mask separated by commas.
+ - Now "make uninstall" removes the installed "ngircd.conf" file, if it is
+ still equal to our "sample-ngircd.conf" file and therefore hasn't been
+ modified by the user. If it has been modified, it isn't removed and a
+ notice is displayed to the user. And "make install" now displays a
+ message when no ngircd.conf file exists and the "sample-ngircd.conf"
+ file will be installed as a starting point.
+ - Add contrib/ngircd.service, a systemd service file for ngircd.
+ - Implemented XOP channel user modes: "Half Op" ("+h", prefix "%") can set
+ the channel modes +imntvIbek and kick all +v and normal users; "Admin"
+ ("+a", prefix "&") can set channel modes +imntvIbekoRsz and kick all +o,
+ +h, +v and normal users; and "Owner" ("+q", prefix "~") can set channel
+ modes +imntvIbekoRsz and kick all +a, +o, +h, +v and normal users.
+ - Implement hashed cloaked hostnames for both the "CloakHost" and
+ "CloakHostModeX" configuration options: now the admin can use the new
+ '%x' placeholder to insert a hashed version of the clients hostname,
+ and the new configuration option "CloakHostSalt" defines the salt for
+ the hash function. When "CloakHostSalt" is not set (the default), a
+ random salt will be generated after each server restart. (Closes #133)
+
+ngIRCd 19.2 (2012-06-19)
+
+ - doc/Capabilities.txt: document "multi-prefix" capability
+
+ ngIRCd 19.2~rc1 (2012-06-13)
+ - New configuration option "CloakHostModeX" to configure the hostname
+ that gets used for IRC clients which have user mode "+x" enabled.
+ Up to now, the name of the IRC server itself has been used for this,
+ which still is the default when "CloakHostModeX" isn't set.
+ - Correctly handle asynchronously re-established server links: a race
+ condition could let the daemon loose track of an already re-established
+ incoming server link while preparing its own outgoing connection.
+ Peers that both try to connect each other could have been affected.
+ - Log a debug message when SIGUSR2 is handled in debug mode.
+ - Only allow alphanumeric characters in user-supplied user names of
+ USER command and IDENT replies.
+ - Change wording of "TLS initialized" message to make it more consistent.
+ - Don't leak file descriptors on error path when creating "PID files".
+ - Add missing mode "r" to CHANMODES in 005 "ISUPPORT" numeric.
+ - Update doc/Modes.txt and doc/Platforms.txt documents.
+ - contrib/platformtest.sh: correctly detect Open64 C compiler and handle
+ "CC=xxx MAKE=yyy ./platformtest.sh" calling convention.
+ - Add instructions for setting up Atheme IRC services.
+ - Implement support for IRC capability handling, the new "CAP" command,
+ and capability "multi-prefix" which allows both the NAME and WHO command
+ handlers to return more than one "class prefix" to the client.
+ - Update Xcode project files: reference missing documentation files.
+ - Fix: Don't ignore "permission denied" errors when enabling chroot.
+ - FAQ: enhance description of chroot setup.
+
+ngIRCd 19.1 (2012-03-19)
+
+ - Fix gcc warning (v4.6.3), initialize "list" variable to NULL.
+ - Fix typos: "recieved" -> "received", "Please not" -> "Please note",
+ and fix lintian(1) warning ""hyphen-used-as-minus-sign", too.
+ - Really include _all_ patches to build the Anope module into the
+ distribution archive ... ooops!
+ - getpid.sh: Fix test case error for Debian using sbuild(1).
+ - Don't log "ngIRCd hello message" two times when starting up.
+
+ngIRCd 19 (2012-02-29)
+
+ - Update build system: bump config.guess and config.sub files used by
+ GNU autoconf/automake to recent versions.
+ - Fix configuration file parser: don't accept "[SSL]" blocks in the
+ configuration file when no SSL support is built in ngIRCd.
+ - Fix building ngIRCd with old gcc versions (e. g. 2.7.2).
+ - Correctly re-open syslog logging after reading of configuration
+ file: Syslog logging has been initialized before reading the
+ configuration, so ngIRCd always used the default facility and ignored
+ the "SyslogFacility" configuration option ...
+ Thanks to Patrik Schindler for reporting this issue!
+
+ ngIRCd 19~rc1 (2012-02-12)
+ - Enhance command limits for server links: the limit now is dependent
+ on the number of users connected in the network and higher while
+ servers are joining the network to make the login of servers faster.
+ - Log more information about server synchronization.
+ - Update preliminary ngIRCd protocol module for Anope 1.9.6, which now
+ is the only supported version.
+ - New numeric RPL_WHOISHOST_MSG(378), which returns the DNS host name
+ (if available) and the IP address of a client in the WHOIS reply.
+ Only the user itself and local IRC operators get this numeric.
+ - Implement channel exception list (mode 'e'). This allows a channel
+ operator to define exception masks that allow users to join the
+ channel even when a "ban" would match and prevent them from joining:
+ the exception list (e) overrides the ban list (b).
+ - PRIVMSG and NOTICE: Handle nick!user@host masks case-insensitive.
+ - Implement user mode 'C': If the target user of a PRIVMSG or NOTICE
+ command has the user mode 'C' set, it is required that both sender
+ and receiver are on the same channel. This prevents private flooding
+ by completely unknown clients.
+ - New RPL_WHOISREGNICK_MSG(307) numeric in WHOIS command replies: it
+ indicates if a nickname is registered (if user mode 'R' set).
+ - Limit channel invite, ban, and exception lists to 50 entries and fix
+ duplicate check and error messages when adding already listed entries
+ or deleting no (longer) existing ones.
+ - Fix both ERR_SUMMONDISABLED(445) and ERR_USERSDISABLED(446) replies.
+ - MODE command: correctly return ERR_UNKNOWNMODE(472) numeric for
+ unknown channel modes, instead of ERR_UMODEUNKNOWNFLAG(501).
+ - ISUPPORT(005) numeric: add "O", "R", and "z" modes to "CHANMODES",
+ add "EXCEPTS=e" and "INVEX=I", add "MAXLIST=beI:50".
+ - Limit the number of list items in the reply of LIST (100), WHO (25),
+ WHOIS (10), and WHOWAS (25) commands.
+ - LIST command: compare pattern case insensitive.
+ - Limit the MODE command to handle a maximum number of 5 channel modes
+ that require an argument (+Ibkl) per call and report this number
+ in the ISUPPORT(005) numeric: "MODES=5".
+ - Fix handling of channel mode sequence with/without arguments.
+ For example, don't generate wrong error messages when handling
+ "MODE #chan +IIIIItn *!aa@b *!bb@c *!cc@d *!dd@e *!ee@f".
+ - When sending data on a connection, only try to get the type of
+ the client if there still is one assigned. This could trigger an
+ assertion and end the daemon in some error paths.
+ - Don't try to close already closed/invalid sockets to forked child
+ processes. This could potentially crash the daemon in some cases
+ with IDENT lookups enabled.
+ - WHOIS command: make sure that the reply ends with RPL_ENDOFWHOIS,
+ don't answer queries for IRC servers, make sure mask matching is
+ case-insensitive, and that RPL_ENDOFWHOIS numeric is sent with the
+ unmodified mask (like it has been received from the client).
+ - LINKS command: support <mask> parameter to limit the reply.
+ - Add 1 second penalty for every further target on PRIVMSG/NOTICE
+ commands: this reduces the possibility of flooding channels with
+ commands like "PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
+ Problem noticed by Cahata, thanks!
+ - Display correct error message when "Server{UID|GID}" variable in the
+ configuration file is invalid (not a number and no existing user).
+ - Update Copyright notices for 2012 :-)
+ - JOIN command: don't stop handling of channel lists when a single
+ channel cannot be joined (because of bad name, wrong key or channel
+ limit reached), but report an error and continue. And don't check
+ the channel limit and don't report with "too many channels" when
+ trying to join a channel that the client already is a member of.
+ - ISON command: reply with the correct upper-/lowercase nicknames.
+ - New configuration option "PAMIsOptional": when set, clients not
+ sending a password are still allowed to connect: they won't become
+ "identified" and keep the "~" character prepended to their supplied
+ user name. See "man 5 ngircd.conf" for details.
+ - Fixed handling of WHO commands. This fixes two bugs: "WHO <nick>"
+ returned nothing at all if the user was "+i" (reported by Cahata,
+ thanks) and "WHO <nick|nickmask>" returned channel names instead
+ of "*" when the user was member of a (visible) channel.
+ - Fixed some spelling errors in documentation and code comments
+ (Thanks to Christoph Biedl).
+ - contrib/Debian/control: Update and complete "Build-Depends" and
+ update our Debian package descriptions with "official" ones.
+ - Fixed typo in two error messages.
+ - LUSERS reply: only count channels that are visible to the requesting
+ client, so the existence of secret channels is no longer revealed by
+ using LUSERS. Reported by Cahata, thanks!
+ - Unknown user and channel modes no longer stop the mode parser, but
+ are simply ignored. Therefore modes after the unknown one are now
+ handled. This is how ircd2.10/ircd2.11/ircd-seven behave, at least.
+ Reported by Cahata, thanks!
+ - README: Update list of implemented commands.
+ - Log better error messages when rejecting clients.
+ - Implement IRC commands "GLINE" and "KLINE" to ban users. G-Lines are
+ synchronized between server on peering, K-Lines are local only.
+ If you use "*!<user>@<host>" or "*!*@<host>" masks, these connections
+ are blocked even before the user is fully logged in (before PASS,
+ NICK, and USER commands have been processed) and before the child
+ processes for authentication are forked, so resource usage is smaller.
+ - Xcode: update project file for Xcode 4.2 and define HAVE_GAI_STRERROR
+ for Mac OS X Xcode builds.
+ - ./configure: Fix logic and quoting of poll() detection code: only use
+ poll() when poll.h exists as well.
+ - Suppress 'Can't create pre-defined channel: invalid name: ""' message.
+ - whois-test: handle local host name = "localhost.localdomain" using the
+ pattern "localhost*" for valid local host names.
+ - sample-ngircd.conf: show correct default for "PAM" variable: The
+ default of "PAM" is "yes" when ngIRCd has been configured to use it,
+ so show the correct default value in the sample configuration file.
+ (Closes #119)
+ - Update GPL 2 license text to current version.
+ - Only close "unrelated" sockets in forked child processes: This fixes
+ the problem that ngIRCd can't do any IDENT lookups because of the
+ socket has already been closed in the child process.
+ The bug has been introduced starting with ngIRCd 17 ... :-(
+ (commit ID 6ebb31ab35e)
+ - Added doc/Modes.txt: document modes supported by ngIRCd.
+ - Implement user mode "R": indicates that the nickname of this user
+ is "registered". This mode isn't handled by ngIRCd itself, but must
+ be set and unset by IRC services like Anope.
+ - Implement channel mode "R": only registered users (having the user
+ mode "R" set) are allowed to join this channel.
+ - Test suite: bind to loopback (127.0.0.1) interface only.
+ - New 2nd message "Nickname too long" for error code 432.
+ - Xcode: Mac OS X config.h: support 10.5 as well as 10.6/10.7 SDK.
+ - Xcode: exclude more Xcode 4 specific directories in ".gitignore".
+ - Disconnect directly linked servers sending QUIT. Without this,
+ the server becomes removed from the network and the client list,
+ but the connection isn't shut down at all ...
+ - contrib/ngindent: detect "gindent" as GNU indent.
+ - Handle unknown user and channel modes: these modes are saved and
+ forwarded to other servers, but ignored otherwise.
+ - Handle channel user modes 'a', 'h', and 'q' from remote servers.
+ These channel user modes aren't used for anything at the moment,
+ but ngIRCd knows that these three modes are "channel user modes"
+ and not "channel modes", that is that these modes take an "nickname"
+ argument. Like unknown user and channel modes, these modes are saved
+ and forwarded to other servers, but ignored otherwise.
+ - Correctly inform clients when other servers change their user modes.
+ This is required for some services to work correctly.
+ - Test suite: make getpid.sh work even when run as root.
+ - Spoofed prefixes: close connection on non-server links only.
+ On server-links, spoofed prefixes can happen because of the
+ asynchronous nature of the IRC protocol. So don't break server-
+ links, only log a message and ignore the command. (Closes #113)
+
+ngIRCd 18 (2011-07-10)
- Update timestamp of ngircd(8) manual page.
- Add preliminary ngIRCd protocol module for Anope 1.9 to contrib/Anope/.
variable description.
- Don't use "the.net" in sample-ngircd.conf, use "example.net".
- Terminate incoming connections on HTTP commands "GET" and "POST".
- - New configuration option "CloakHost": when set, this hostname is used for
- every client instead of the real DNS hostname (or IP address).
+ - New configuration option "CloakHost": when set, this host name is used for
+ every client instead of the real DNS host name (or IP address).
- New configuration option "CloakUserToNick": when enabled, ngIRCd sets
- every clients' user name to their nick name and hides the user name
+ every clients' user name to their nickname and hides the user name
supplied by the IRC client.
- doc/Protocol.txt: Update description of the CHANINFO and WEBIRC commands.
- Doxygen'ify (document) much more source files; code cleanup ...
only relevant when a trusted server on a server-server link sends invalid
commands).
-ngIRCd Release 17.1 (2010-12-19)
+ngIRCd 17.1 (2010-12-19)
- --configtest: remember if MOTD is configured by file or phrase
- Enhance log messages when establishing server links a little bit
- New numeric 329: get channel creation time on "MODE #chan" commands
- Save channel creation time; new function Channel_CreationTime()
-ngIRCd Release 17 (2010-11-07)
+ngIRCd 17 (2010-11-07)
- doc: change path names in sample-ngircd.conf depending on sysconfdir
- Fix up generation and distribution of sample-ngircd.conf
- contrib/platformtest.sh: make command name quoting consistent
ngIRCd 17~rc3 (2010-10-27)
- - Xcode builds: detect version number correctly, updateed project file
+ - Xcode builds: detect version number correctly, updated project file
to use the Mac OS X 10.5.x SDK, disable pam_fail_delay() because it
is only available starting with Mac OS X 10.6, and generate a default
PAM configuration for the Mac OS X Installer.app package of ngIRCd.
ngIRCd 17~rc2 (2010-10-25)
- ZeroConf: include header files missing since commit a988bbc86a.
- Generate ngIRCd version number from GIT tag.
- - Make sourcecode compatible with ansi2knr again. This allows to compile
+ - Make source code compatible with ansi2knr again. This allows to compile
ngIRCd using a pre-ANSI K&R C compiler again.
- ./configure: check if C compiler can compile ISO Standard C.
- ./configure: check support for C prototypes again.
Howl, Avahi or on Mac OS X).
- New configuration option "SyslogFacility" to define the syslog "facility"
(the "target"), to which ngIRCd should send its log messages.
- Possible values are system dependant, but most probably "auth", "daemon",
+ Possible values are system dependent, but most probably "auth", "daemon",
"user" and "local1" through "local7" are possible values; see syslog(3).
Default is "local5" for historical reasons.
- Dump the "internal server state" (configured servers, established
- configure script: correctly indent IPv6 yes/no summary output.
- Don't reset My_Connections[Idx].lastping when reading data, so the
client lag debug-output is working again.
- - Implement user mode "x": hostname cloaking (closes: #102).
+ - Implement user mode "x": host name cloaking (closes: #102).
- Make configure switch "--docdir" work (closes: #108).
- Reformat and update FAQ.txt a little bit.
- INSTALL: mention SSL, IPv6, and changed handling of MotdFile.
- - Change MOTD file handling: ngIRCd now caches the contens of the MOTD
+ - Change MOTD file handling: ngIRCd now caches the contents of the MOTD
file, so the daemon now requires a HUP signal or REHASH command to
re-read the MOTD file when its content changed.
- Startup: open /dev/null before chroot'ing the daemon.
- Fix "beeing" typo ...
- SSL/TLS: fix bogus "socket closed" error message.
-ngIRCd Release 16 (2010-05-02)
+ngIRCd 16 (2010-05-02)
- doc/SSL: remove line continuation marker
- Include netinet/{in.h, in_systm.h} when checking for netinet/ip.h
- Only include <netinet/in_systm.h> if it exists
- Updated doc/Platforms.txt
- - Enhace connection statistics counters: display total number of served
+ - Enhance connection statistics counters: display total number of served
connections on daemon shutdown and when a new client connects using
the new numeric RPL_STATSCONN (250).
ngIRCd 16~rc1 (2010-03-25)
- Various fixes to the build system and code cleanups.
- contrib/platformtest.sh: Only show latest commit.
- - Updatet doc/Platforms.txt, added new README-Interix.txt documenting
+ - Updated doc/Platforms.txt, added new README-Interix.txt documenting
how to tun ngIRCd on Microsoft Services for UNIX (MS SFU, MS SUA).
- Updated links to the ngIRCd homepage (bug tracker, mailing list).
- Added missing modes to USERMODES #define
every channel, and c) remote clients using a server not supporting this
mode are not checked either and therefore always allowed to join.
-ngIRCd Release 15 (2009-11-07)
+ngIRCd 15 (2009-11-07)
- "ngircd --configtest": print SSL configuration options even when unset.
ngIRCd 15~rc1 (2009-10-15)
- Do not add default listening port (6667) if SSL ports were specified, so
ngIRCd can be configured to only accept SSL-encrypted connections now.
- - Enable IRC operators to use the IRC command SQUIT (insted of the already
+ - Enable IRC operators to use the IRC command SQUIT (instead of the already
implemented but non-standard DISCONNECT command).
- New configuration option "AllowRemoteOper" (disabled by default) that
enables remote IRC operators to use the IRC commands SQUIT and CONNECT
- Fix a few error handling glitches for SSL/TLS connections.
- Minor fixes to manual pages and documentation.
-ngIRCd Release 14.1 (2009-05-05)
+ngIRCd 14.1 (2009-05-05)
- Security: fix remotely triggerable crash in SSL/TLS code.
- BSD start script contrib/ngircd.sh has been renamed to ngircd-bsd.sh.
- Allow ping timeout quit messages to show the timeout value.
- Fix error handling on compressed links.
- Fix server list announcement.
- - Do not remove hostnames from info text.
+ - Do not remove host names from info text.
-ngIRCd Release 14 (2009-04-20)
+ngIRCd 14 (2009-04-20)
- Display IPv6 addresses as "[<addr>]" when accepting connections.
- Fix memory leak when a encrypted and compressed server link goes down.
(closes bug #95, reported by Christoph, fiesh@fiesh.homeip.net)
- Fix handling of channels containing dots.
- (closes ug #93, reported by Gonosz Csiga)
+ (closes bug #93, reported by Gonosz Csiga)
-ngIRCd Release 13 (2008-12-25)
+ngIRCd 13 (2008-12-25)
- Updated documentation, especially doc/Services.txt and doc/SSL.txt.
- Make the test suite work on OpenSolaris.
- RPL_WHOREPLY messages generated by IRC_WHO didn't include flags (*,@,+).
(Dana Dahlstrom)
- IRC_WHO now supports search patterns and will test this against user
- nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
+ nickname/server name/host name, etc. as required by RFC 2812, Section 3.6.1.
(reported by Dana Dahlstrom)
- Add test cases for "WHO" command. (Dana Dahlstrom)
- Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
ngIRCd 0.11.0-pre2 (2008-01-07)
- SECURITY: IRC_PART could reference invalid memory, causing
ngircd to crash [from HEAD]. (CVE-2008-0285)
-
+
ngIRCd 0.11.0-pre1 (2008-01-02)
- - Use dotted-decimal IP address if hostname is >= 64.
+ - Use dotted-decimal IP address if host name is >= 64.
- Add support for /STAT u (server uptime) command.
- New [Server] configuration Option "Bind" allows to specify
the source IP address to use when connecting to remote server.
- New configuration option "MaxNickLength" to specify the allowed maximum
- length of user nick names. Note: must be unique in an IRC network!
+ length of user nicknames. Note: must be unique in an IRC network!
- Enhanced the IRC+ protocol to support an enhanced "server handshake" and
enable server to recognize numeric 005 (ISUPPORT) and 376 (ENDOFMOTD).
See doc/Protocol.txt for details.
- SECURITY: IRC_PART could reference invalid memory, causing
ngircd to crash [from HEAD]. (CVE-2008-0285)
-
+
ngIRCd 0.10.3 (2007-08-01)
- SECURITY: Fixed a severe bug in handling JOIN commands, which could
- Fixed ./configure test for TCP Wrappers: now it runs on Mac OS X as well.
- Enhanced configure script: now you can pass an (optional) search path
to all --with-XXX parameters, e. g. "--with-ident=/opt/ident".
- - Removed typedefs for the native C datatypes.
+ - Removed typedefs for the native C data types.
Use stdbool.h / inttypes.h if available.
- New configuration option "OperServerMode" to enable a workaround needed
when running an network with ircd2 servers and "OperCanUseMode" enabled
original ircd exactly: the unnecessary but missing ":" before the last
parameter has been added.
- Fixed TRACE: don't output "Serv" lines for ourself; display more info.
- - Results of the resolver (hostnames and IDENT names) are discarded after
+ - Results of the resolver (host names and IDENT names) are discarded after
the client is successfully registered with the server.
- Better logging while establishing and shutting down connections.
- The type of service (TOS) of all sockets is set to "interactive" now.
to add a new server (ngIRCd tries to connect new servers only once!).
- Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
- Restructured the documentation: Now the main language is English. The
- german documentation has been removed (until there is a maintainer).
+ German documentation has been removed (until there is a maintainer).
- Enhanced killing of users caused by a nickname collision.
- Better error detection for status code ("numerics") forwarding.
- Moved tool functions to own library: "libngtool".
- Documentation is now installed in $(datadir)/doc/ngircd.
- Enhanced handling of NJOIN in case of nick collisions.
-ngIRCd 0.6.1, 2003-01-21
+ngIRCd 0.6.1 (2003-01-21)
- Fixed KILL: you can't crash the server by killing yourself any more,
ngIRCd no longer sends a QUIT to other servers after the KILL, and you
member when changing his channel user modes which could crash ngIRCd.
-Older changes (sorry, only available in german language):
+Older changes (sorry, only available in German language):
-ngIRCd 0.6.0, 2002-12-24
+ngIRCd 0.6.0, 24.12.2002
- ngIRCd 0.6.0-pre2, 2002-12-23
+ ngIRCd 0.6.0-pre2, 23.12.2002
- neuer Numeric 005 ("Features") beim Connect.
- LUSERS erweitert: nun wird die maximale Anzahl der lokalen und globalen
Clients, die dem Server bzw. im Netzwerk seit dem letzten (Re-)Start
dem Server gleichzeitig bekannt waren, angezeigt.
- ngIRCd 0.6.0-pre1, 2002-12-18
+ ngIRCd 0.6.0-pre1, 18.12.2002
- beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
- der Server wartet bei einer eingehenden Verbindung nun laenger auf den
werden (beide Server versuchen sich dann gegenseitig zu connectieren).
- Test-Suite und Dokumentation an A/UX angepasst.
- unter HP-UX definiert das configure-Script nun _XOPEN_SOURCE_EXTENDED.
- - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
+ - Server identifizieren sich nun mit asynchronen Passwoertern, d.h. das
Passwort, welches A an B schickt, kann ein anderes sein als das, welches
B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
ngIRCd 0.5.4, 24.11.2002
- - Fehler-Handling von connect() gefixed: der Server kann sich nun auch
+ - Fehler-Handling von connect() gefixed: der Server kann sich nun auch
unter A/UX wieder zu anderen verbinden.
- in den Konfigurationsvariablen ServerUID und ServerGID kann nun nicht
nur die numerische ID, sondern auch der Name des Users bzw. der Gruppe
- Protokoll- und Server-ID bei PASS-Befehlen auf neues Format umgestellt;
bei empfangenen PASS-Befehlen werden diese zudem nun auch ausgewertet.
Die unterstuetzten Flags sind in doc/Protocol.txt beschrieben.
- - mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
+ - mit dem neuen Befehl CHANINFO synchronisieren Server, die das IRC+-
Protokoll unterstuetzen, Channel-Modes und Topics.
- neue Option "--disable-ircplus" fuer das configure-Script, um das
IRC+-Protokoll abzuschalten (per Default ist es aktiviert).
- ADMIN-Befehl implementiert. Die Daten hierzu werden in der Konfig-Datei
im [Global]-Abschnitt mit den Variablen "AdminInfo1", "AdminInfo2" und
"AdminEMail" konfiguriert.
-
+
ngIRCd 0.4.3, 11.06.2002
- Bei PRIVMSG und NOTICE hat der ngIRCd nicht ueberpruft, ob das Ziel
- PRIVMSG beachtet nun die Channel-Modes "n" und "m".
- AWAY implementiert. PRIVMSG, MODE, USERHOST und WHOIS angepasst.
- der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
- - ausgehende Server-Verbindungen werden nun asyncron connectiert und
+ - ausgehende Server-Verbindungen werden nun asynchron connectiert und
blockieren nicht mehr den ganzen Server, wenn die Gegenseite nicht
erreicht werden kann (bis zum Timeout konnten Minuten vergehen!).
- Wert der Konfigurations-Variable "ConnectRetry" wird besser beachtet.
- NICK kann nun die Gross- und Kleinschreibung eines Nicks aendern.
- ein Server-Passwort ist nun konfigurierbar.
- neue Befehle: ERROR, SERVER, NJOIN (nur als "Fake"), SQUIT.
- - Asyncroner Resolver Hostname->IP implementiert.
+ - Asynchroner Resolver Hostname->IP implementiert.
- Server-Links teilweise implementiert: bisher kann der ngIRCd jedoch
nur "leafed server" sein, d.h. keine "Client-Server" haben. Einige
Befehle sind auch noch nicht (optimal) angepasst: PRIVMSG funktioniert