2 ngIRCd - Next Generation IRC Server
4 (c)2001-2010 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 ngIRCd 16~rc2 (2010-04-25)
16 - Enhace connection statistics counters: display total number of served
17 connections on daemon shutdown and when a new client connects using
18 the new numeric RPL_STATSCONN (250).
20 ngIRCd 16~rc1 (2010-03-25)
21 - Implement WEBIRC command used by some Web-IRC frontends. The password
22 required to secure this command must be configured using the new
23 "WebircPassword" variable in the ngircd.conf file.
24 - Remove limit on max number of configured irc operators.
25 - A new channel mode "secure connections only" (+z) has been implemented:
26 Only clients using a SSL encrypted connection to the server are allowed
27 to join such a channel.
28 But please note three things: a) already joined clients are not checked
29 when setting this mode, b) IRC operators are always allowed to join
30 every channel, and c) remote clients using a server not supporting this
31 mode are not checked either and therefore always allowed to join.
33 ngIRCd Release 15 (2009-11-07)
35 ngIRCd 15~rc1 (2009-10-15)
36 - Do not add default listening port (6667) if SSL ports were specified, so
37 ngIRCd can be configured to only accept SSL-encrypted connections now.
38 - Enable IRC operators to use the IRC command SQUIT (insted of the already
39 implemented but non-standard DISCONNECT command).
40 - New configuration option "AllowRemoteOper" (disabled by default) that
41 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
43 - Enforce upper limit on maximum number of handled commands. This implements
44 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
45 per second before a one second pause is enforced.
47 ngIRCd Release 14.1 (2009-05-05)
49 - Security: fix remotely triggerable crash in SSL/TLS code.
50 - Debian: build ngircd-full-dbg package.
51 - Allow ping timeout quit messages to show the timeout value.
53 ngIRCd Release 14 (2009-04-20)
55 ngIRCd 14~rc1 (2009-03-29)
56 - Allow creation of persistent modeless channels.
57 - The INFO command reports the compile time now (if available).
58 - Support individual channel keys for pre-defined channels: introduce
59 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
60 here a file can be configured for each pre-defined channel which contains
61 individual channel keys for different users.
62 - Remove limit on maximum number of predefined channels in ngircd.conf.
64 ngIRCd Release 13 (2008-12-25)
66 ngIRCd 13~rc1 (2008-11-21):
67 - New version number scheme :-)
68 - Initial support for IRC services, using a RFC1459 style interface,
69 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
70 For this to work, ngIRCd now supports server-server links conforming
71 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
72 - Support for SSL-encrypted server-server and client-server links using
73 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
74 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
75 SSLCertFile, SSLDHFile, and SSLConnect.
76 - Server local channels have been implemented, prefix "&", that are only
77 visible to users of the same server and are not visible in the network.
78 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
79 all the messages to it that a user with mode +s receives.
80 - New make target "osxpkg" to build a Mac OS X installer package.
81 - New configuration option "NoIdent" to disable IDENT lookups even if the
82 daemon is compiled with IDENT support.
84 ngIRCd 0.12.1 (2008-07-09)
86 - Add option aliases -V (for --version) and -h (for --help).
87 - Make Listen parameter a comma-separated list of addresses. This also
88 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
89 is treated as Listen="::,0.0.0.0".
90 Note: ListenIPv4 and ListenIPv6 options are still recognized,
91 but ngircd will print a warning if they are used in the config file.
93 ngIRCd 0.12.0 (2008-05-13)
95 ngIRCd 0.12.0-pre2 (2008-04-29)
96 - IPv6: Add config options to disable ipv4/ipv6 support.
98 ngIRCd 0.12.0-pre1 (2008-04-20)
100 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
101 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
102 enhanced test suite to check these commands. (Dana Dahlstrom)
103 - IRC_WHO now supports search patterns and will test this against user
104 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
105 (reported by Dana Dahlstrom)
106 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
107 as if the user had sent PART commands for all channels the user is a
108 member of. (Dana Dahlstrom)
109 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
111 ngIRCd 0.11.0 (2008-01-15)
113 - Add support for /STAT u (server uptime) command.
114 - New [Server] configuration Option "Bind" allows to specify
115 the source IP address to use when connecting to remote server.
116 - New configuration option "MaxNickLength" to specify the allowed maximum
117 length of user nick names. Note: must be unique in an IRC network!
118 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
119 - Added new server configuration option "Passive" for "Server" blocks to
120 disable automatic outgoing connections (similar to -p option to ngircd,
121 but only for the specified server). (Tassilo Schweyer)
122 - Added support for the WALLOPS command. Usage is restricted to IRC
125 ngIRCd 0.10.2 (2007-06-08)
127 - Predefined channel configuration now allows specification of channel key
128 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
129 - When using the epoll() IO interface, compile in the select() interface as
130 well and fall back to it when epoll() isn't available on runtime.
131 - Added support for IO APIs "poll()" and "/dev/poll".
133 ngIRCd 0.10.1 (2006-12-17)
135 - Allow PASS syntax defined in RFC 1459 for server links, too.
136 - New configuration option "PredefChannelsOnly": if set, clients can only
137 join predefined channels.
139 ngIRCd 0.10.0 (2006-10-01)
141 ngIRCd 0.10.0-pre1 (2006-08-02)
142 - Enhanced DIE to accept a single parameter ("comment text") which is sent
143 to all locally connected clients before the server goes down.
144 - JOIN now supports more than one channel key at a time.
145 - Implemented numeric "333": Time and user name who set a channel topic.
146 - Channel topics are no longer limited to 127 characters: now the only limit
147 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
148 limits the topic to about 490 characters due to protocol overhead).
149 - Reverse DNS lookup code now checks the result by doing an additional
150 lookup to prevent spoofing.
151 - Added new IO layer which (optionally) supports epoll() and kqueue() in
152 addition to the select() interface.
154 ngIRCd 0.9.0 (2005-07-24)
156 - Never run with root privileges but always switch the user ID.
157 - Make "netsplit" messages RFC compliant.
158 - Implemented the IRC function "WHOWAS".
159 - New configuration option "OperServerMode" to enable a workaround needed
160 when running an network with ircd2 servers and "OperCanUseMode" enabled
161 to prevent the ircd2 daemon to drop mode changes of IRC operators.
162 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
163 - Implemented support for "secret channels" (channel mode "s").
164 - New configuration option "Mask" for [Operator] sections to limit OPER
165 commands to users with a specific IRC mask. Patch from Florian Westphal.
166 - New configuration variable "PidFile", section "[Global]": if defined,
167 the server writes its process ID (PID) to this file. Default: off.
168 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
169 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
170 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
171 API will be autodetected when you call "./configure --with-rendezvous".
173 ngIRCd 0.8.0 (2004-06-26)
175 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
176 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
177 its root and working directory to something "safe". MotdPhrase is used
178 to define an "MOTD string" instead of a whole file, useful if the
179 "real" MOTD file would be outside the "jail".
180 - INVITE- and BAN-lists become synchronized between IRC+ servers when
181 establishing new connections, if the peer supports this as well.
182 - The type of service (TOS) of all sockets is set to "interactive" now.
183 - Added short command line option "-t" as alternative to "--configtest".
184 - Added optional support for "IDENT" lookups on incoming connections. You
185 have to enable this function with the ./configure switch "--with-ident".
186 The default is not to do IDENT lookups.
188 ngIRCd 0.7.5 (2003-07-11)
190 - New configuration variable "MaxConnectionsIP" to limit the number of
191 simultaneous connections from a single IP that the server will accept.
192 This configuration options lowers the risk of denial of service attacks
193 (DoS), the default is 5 connections per client IP.
194 - Added new configuration variable "Listen" to bind all listening
195 sockets of the server to a single IP address.
197 ngIRCd 0.7.1 (2003-07-18)
199 - Added support for GNU/Hurd.
201 ngIRCd 0.7.0 (2003-05-01)
203 - New command CONNECT to enable and add server links. The syntax is not
204 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
205 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
206 to add a new server (ngIRCd tries to connect new servers only once!).
207 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
208 - New command TRACE (you can trace only servers at the moment).
209 - New command HELP that lists all understood commands.
210 - ngIRCd can register itself with Rendezvous: to enable support pass the
211 new switch "--with-rendezvous" to configure.
212 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
213 configure to enable it.
214 - Changed some configure options to use "--with"/"--without" as prefix
215 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
216 "--with-tcp-wrappers", and "--with-rendezvous".
217 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
218 - Documentation is now installed in $(datadir)/doc/ngircd.
221 Older news (sorry, only available in german language):
223 ngIRCd 0.6.0, 2002-12-24
225 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
226 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
227 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
228 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
229 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
230 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
231 Der Default ist -1, "unlimitiert".
232 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
233 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
234 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
235 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
236 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
237 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
238 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
239 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
240 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
241 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
242 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
243 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
244 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
245 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
246 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
247 miteinander ueber komprimiert Links kommunizieren.
248 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
249 der Channels, in denen ein User Mitglied sein kann, begrent werden.
250 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
252 ngIRCd 0.5.0, 20.09.2002
254 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
255 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
256 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
257 dem "nativen" (ggf. pre-ANSI) Compiler.
258 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
259 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
260 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
261 wenn kein User mehr im Channel ist.
262 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
263 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
264 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
265 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
266 "AdminInfo2" und "AdminEMail".
267 - Invite- und Ban-Lists implementiert.
268 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
269 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
270 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
272 ngIRCd 0.4.2, 29.04.2002
274 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
275 Regular Expressions (bis auf "*") unterstuetzt.
277 ngIRCd 0.4.0, 01.04.2002
279 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
280 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
281 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
282 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
283 zusaetzliche Informationen.
284 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
285 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
286 nicht, so wird der naechste probiert.
287 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
288 einen Hash-Wert gesucht: sollte deutlich schneller sein.
289 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
290 gelesen und die dann verwendeten Werte angezeigt.
291 - Client-Mode "s" (Server Notices) implementiert.
292 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
293 alternative Konfigurationsdatei angegeben werden.
294 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
295 zu einer anderen User-ID und Group-ID wechseln.
297 ngIRCd 0.3.0, 02.03.2002
299 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
300 er auf den IRC-Befehl RESTART reagiert.
301 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
302 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
303 Zum Debuggen manchmal ganz praktisch :-)
304 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
305 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
306 - AWAY (und der User-Mode 'a') ist nun implementiert.
307 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
308 - Channel- und Nicknames werden nun ordentlich validiert.
310 ngIRCd 0.2.0, 15.02.2002
312 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
313 Server versteht an User-Modes o und v, beachtet letzteres allerdings
314 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
315 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
316 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
317 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
319 ngIRCd 0.1.0, 29.01.2002
321 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
322 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
323 Chatten in Channels ist aber natuerlich moeglich ;-)
324 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
325 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
326 - FAQ.txt in doc/ begonnen.
328 ngIRCd 0.0.3, 16.01.2002
330 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
331 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
332 IRC-Netzwerk arbeiten.
333 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
334 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
335 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
336 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
337 - neue Befehle: LUSERS, LINKS.
339 ngIRCd 0.0.2, 06.01.2002
341 - neuer Aufbau der Konfigurationsdatei,
342 - mehrere IRC-Operatoren koennen konfiguriert werden,
343 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
344 nur "leafed server" sein, d.h. keine "Client-Server" haben.
346 ngIRCd 0.0.1, 31.12.2001
348 - erste oeffentliche Version von ngIRCd als "public preview" :-)
352 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $