2 ngIRCd - Next Generation IRC Server
4 (c)2001-2007 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 ngIRCd 0.10.2 (2007-06-08)
17 - Predefined channel configuration now allows specification of channel key
18 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
19 - When using the epoll() IO interface, compile in the select() interface as
20 well and fall back to it when epoll() isn't available on runtime.
21 - Added support for IO APIs "poll()" and "/dev/poll".
23 ngIRCd 0.10.1 (2006-12-17)
25 - Allow PASS syntax defined in RFC 1459 for server links, too.
26 - New configuration option "PredefChannelsOnly": if set, clients can only
27 join predefined channels.
29 ngIRCd 0.10.0 (2006-10-01)
31 ngIRCd 0.10.0-pre1 (2006-08-02)
32 - Enhanced DIE to accept a single parameter ("comment text") which is sent
33 to all locally connected clients before the server goes down.
34 - JOIN now supports more than one channel key at a time.
35 - Implemented numeric "333": Time and user name who set a channel topic.
36 - Channel topics are no longer limited to 127 characters: now the only limit
37 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
38 limits the topic to about 490 characters due to protocol overhead).
39 - Reverse DNS lookup code now checks the result by doing an additional
40 lookup to prevent spoofing.
41 - Added new IO layer which (optionally) supports epoll() and kqueue() in
42 addition to the select() interface.
44 ngIRCd 0.9.0 (2005-07-24)
46 - Never run with root privileges but always switch the user ID.
47 - Make "netsplit" messages RFC compliant.
48 - Implemented the IRC function "WHOWAS".
49 - New configuration option "OperServerMode" to enable a workaround needed
50 when running an network with ircd2 servers and "OperCanUseMode" enabled
51 to prevent the ircd2 daemon to drop mode changes of IRC operators.
52 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
53 - Implemented support for "secret channels" (channel mode "s").
54 - New configuration option "Mask" for [Operator] sections to limit OPER
55 commands to users with a specific IRC mask. Patch from Florian Westphal.
56 - New configuration variable "PidFile", section "[Global]": if defined,
57 the server writes its process ID (PID) to this file. Default: off.
58 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
59 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
60 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
61 API will be autodetected when you call "./configure --with-rendezvous".
63 ngIRCd 0.8.0 (2004-06-26)
65 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
66 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
67 its root and working directory to something "safe". MotdPhrase is used
68 to define an "MOTD string" instead of a whole file, useful if the
69 "real" MOTD file would be outside the "jail".
70 - INVITE- and BAN-lists become synchronized between IRC+ servers when
71 establishing new connections, if the peer supports this as well.
72 - The type of service (TOS) of all sockets is set to "interactive" now.
73 - Added short command line option "-t" as alternative to "--configtest".
74 - Added optional support for "IDENT" lookups on incoming connections. You
75 have to enable this function with the ./configure switch "--with-ident".
76 The default is not to do IDENT lookups.
78 ngIRCd 0.7.5 (2003-07-11)
80 - New configuration variable "MaxConnectionsIP" to limit the number of
81 simultaneous connections from a single IP that the server will accept.
82 This configuration options lowers the risk of denial of service attacks
83 (DoS), the default is 5 connections per client IP.
84 - Added new configuration variable "Listen" to bind all listening
85 sockets of the server to a single IP address.
87 ngIRCd 0.7.1 (2003-07-18)
89 - Added support for GNU/Hurd.
91 ngIRCd 0.7.0 (2003-05-01)
93 - New command CONNECT to enable and add server links. The syntax is not
94 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
95 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
96 to add a new server (ngIRCd tries to connect new servers only once!).
97 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
98 - New command TRACE (you can trace only servers at the moment).
99 - New command HELP that lists all understood commands.
100 - ngIRCd can register itself with Rendezvous: to enable support pass the
101 new switch "--with-rendezvous" to configure.
102 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
103 configure to enable it.
104 - Changed some configure options to use "--with"/"--without" as prefix
105 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
106 "--with-tcp-wrappers", and "--with-rendezvous".
107 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
108 - Documentation is now installed in $(datadir)/doc/ngircd.
111 Older news (sorry, only available in german language):
113 ngIRCd 0.6.0, 2002-12-24
115 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
116 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
117 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
118 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
119 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
120 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
121 Der Default ist -1, "unlimitiert".
122 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
123 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
124 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
125 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
126 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
127 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
128 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
129 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
130 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
131 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
132 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
133 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
134 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
135 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
136 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
137 miteinander ueber komprimiert Links kommunizieren.
138 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
139 der Channels, in denen ein User Mitglied sein kann, begrent werden.
140 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
142 ngIRCd 0.5.0, 20.09.2002
144 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
145 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
146 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
147 dem "nativen" (ggf. pre-ANSI) Compiler.
148 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
149 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
150 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
151 wenn kein User mehr im Channel ist.
152 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
153 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
154 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
155 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
156 "AdminInfo2" und "AdminEMail".
157 - Invite- und Ban-Lists implementiert.
158 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
159 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
160 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
162 ngIRCd 0.4.2, 29.04.2002
164 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
165 Regular Expressions (bis auf "*") unterstuetzt.
167 ngIRCd 0.4.0, 01.04.2002
169 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
170 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
171 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
172 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
173 zusaetzliche Informationen.
174 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
175 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
176 nicht, so wird der naechste probiert.
177 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
178 einen Hash-Wert gesucht: sollte deutlich schneller sein.
179 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
180 gelesen und die dann verwendeten Werte angezeigt.
181 - Client-Mode "s" (Server Notices) implementiert.
182 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
183 alternative Konfigurationsdatei angegeben werden.
184 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
185 zu einer anderen User-ID und Group-ID wechseln.
187 ngIRCd 0.3.0, 02.03.2002
189 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
190 er auf den IRC-Befehl RESTART reagiert.
191 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
192 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
193 Zum Debuggen manchmal ganz praktisch :-)
194 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
195 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
196 - AWAY (und der User-Mode 'a') ist nun implementiert.
197 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
198 - Channel- und Nicknames werden nun ordentlich validiert.
200 ngIRCd 0.2.0, 15.02.2002
202 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
203 Server versteht an User-Modes o und v, beachtet letzteres allerdings
204 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
205 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
206 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
207 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
209 ngIRCd 0.1.0, 29.01.2002
211 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
212 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
213 Chatten in Channels ist aber natuerlich moeglich ;-)
214 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
215 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
216 - FAQ.txt in doc/ begonnen.
218 ngIRCd 0.0.3, 16.01.2002
220 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
221 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
222 IRC-Netzwerk arbeiten.
223 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
224 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
225 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
226 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
227 - neue Befehle: LUSERS, LINKS.
229 ngIRCd 0.0.2, 06.01.2002
231 - neuer Aufbau der Konfigurationsdatei,
232 - mehrere IRC-Operatoren koennen konfiguriert werden,
233 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
234 nur "leafed server" sein, d.h. keine "Client-Server" haben.
236 ngIRCd 0.0.1, 31.12.2001
238 - erste oeffentliche Version von ngIRCd als "public preview" :-)
242 $Id: NEWS,v 1.80 2007/06/13 14:32:13 alex Exp $