2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
13 ngIRCd Release 13 (2008-12-25)
15 ngIRCd 13~rc1 (2008-11-21):
16 - New version number scheme :-)
17 - Initial support for IRC services, using a RFC1459 style interface,
18 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
19 For this to work, ngIRCd now supports server-server links conforming
20 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
21 - Support for SSL-encrypted server-server and client-server links using
22 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
23 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
24 SSLCertFile, SSLDHFile, and SSLConnect.
25 - Server local channels have been implemented, prefix "&", that are only
26 visible to users of the same server and are not visible in the network.
27 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
28 all the messages to it that a user with mode +s receives.
29 - New make target "osxpkg" to build a Mac OS X installer package.
30 - New configuration option "NoIdent" to disable IDENT lookups even if the
31 daemon is compiled with IDENT support.
33 ngIRCd 0.12.1 (2008-07-09)
35 - Add option aliases -V (for --version) and -h (for --help).
36 - Make Listen parameter a comma-separated list of addresses. This also
37 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
38 is treated as Listen="::,0.0.0.0".
39 Note: ListenIPv4 and ListenIPv6 options are still recognized,
40 but ngircd will print a warning if they are used in the config file.
42 ngIRCd 0.12.0 (2008-05-13)
44 ngIRCd 0.12.0-pre2 (2008-04-29)
45 - IPv6: Add config options to disable ipv4/ipv6 support.
47 ngIRCd 0.12.0-pre1 (2008-04-20)
49 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
50 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
51 enhanced test suite to check these commands. (Dana Dahlstrom)
52 - IRC_WHO now supports search patterns and will test this against user
53 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
54 (reported by Dana Dahlstrom)
55 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
56 as if the user had sent PART commands for all channels the user is a
57 member of. (Dana Dahlstrom)
58 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
60 ngIRCd 0.11.0 (2008-01-15)
62 - Add support for /STAT u (server uptime) command.
63 - New [Server] configuration Option "Bind" allows to specify
64 the source IP address to use when connecting to remote server.
65 - New configuration option "MaxNickLength" to specify the allowed maximum
66 length of user nick names. Note: must be unique in an IRC network!
67 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
68 - Added new server configuration option "Passive" for "Server" blocks to
69 disable automatic outgoing connections (similar to -p option to ngircd,
70 but only for the specified server). (Tassilo Schweyer)
71 - Added support for the WALLOPS command. Usage is restricted to IRC
74 ngIRCd 0.10.2 (2007-06-08)
76 - Predefined channel configuration now allows specification of channel key
77 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
78 - When using the epoll() IO interface, compile in the select() interface as
79 well and fall back to it when epoll() isn't available on runtime.
80 - Added support for IO APIs "poll()" and "/dev/poll".
82 ngIRCd 0.10.1 (2006-12-17)
84 - Allow PASS syntax defined in RFC 1459 for server links, too.
85 - New configuration option "PredefChannelsOnly": if set, clients can only
86 join predefined channels.
88 ngIRCd 0.10.0 (2006-10-01)
90 ngIRCd 0.10.0-pre1 (2006-08-02)
91 - Enhanced DIE to accept a single parameter ("comment text") which is sent
92 to all locally connected clients before the server goes down.
93 - JOIN now supports more than one channel key at a time.
94 - Implemented numeric "333": Time and user name who set a channel topic.
95 - Channel topics are no longer limited to 127 characters: now the only limit
96 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
97 limits the topic to about 490 characters due to protocol overhead).
98 - Reverse DNS lookup code now checks the result by doing an additional
99 lookup to prevent spoofing.
100 - Added new IO layer which (optionally) supports epoll() and kqueue() in
101 addition to the select() interface.
103 ngIRCd 0.9.0 (2005-07-24)
105 - Never run with root privileges but always switch the user ID.
106 - Make "netsplit" messages RFC compliant.
107 - Implemented the IRC function "WHOWAS".
108 - New configuration option "OperServerMode" to enable a workaround needed
109 when running an network with ircd2 servers and "OperCanUseMode" enabled
110 to prevent the ircd2 daemon to drop mode changes of IRC operators.
111 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
112 - Implemented support for "secret channels" (channel mode "s").
113 - New configuration option "Mask" for [Operator] sections to limit OPER
114 commands to users with a specific IRC mask. Patch from Florian Westphal.
115 - New configuration variable "PidFile", section "[Global]": if defined,
116 the server writes its process ID (PID) to this file. Default: off.
117 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
118 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
119 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
120 API will be autodetected when you call "./configure --with-rendezvous".
122 ngIRCd 0.8.0 (2004-06-26)
124 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
125 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
126 its root and working directory to something "safe". MotdPhrase is used
127 to define an "MOTD string" instead of a whole file, useful if the
128 "real" MOTD file would be outside the "jail".
129 - INVITE- and BAN-lists become synchronized between IRC+ servers when
130 establishing new connections, if the peer supports this as well.
131 - The type of service (TOS) of all sockets is set to "interactive" now.
132 - Added short command line option "-t" as alternative to "--configtest".
133 - Added optional support for "IDENT" lookups on incoming connections. You
134 have to enable this function with the ./configure switch "--with-ident".
135 The default is not to do IDENT lookups.
137 ngIRCd 0.7.5 (2003-07-11)
139 - New configuration variable "MaxConnectionsIP" to limit the number of
140 simultaneous connections from a single IP that the server will accept.
141 This configuration options lowers the risk of denial of service attacks
142 (DoS), the default is 5 connections per client IP.
143 - Added new configuration variable "Listen" to bind all listening
144 sockets of the server to a single IP address.
146 ngIRCd 0.7.1 (2003-07-18)
148 - Added support for GNU/Hurd.
150 ngIRCd 0.7.0 (2003-05-01)
152 - New command CONNECT to enable and add server links. The syntax is not
153 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
154 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
155 to add a new server (ngIRCd tries to connect new servers only once!).
156 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
157 - New command TRACE (you can trace only servers at the moment).
158 - New command HELP that lists all understood commands.
159 - ngIRCd can register itself with Rendezvous: to enable support pass the
160 new switch "--with-rendezvous" to configure.
161 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
162 configure to enable it.
163 - Changed some configure options to use "--with"/"--without" as prefix
164 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
165 "--with-tcp-wrappers", and "--with-rendezvous".
166 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
167 - Documentation is now installed in $(datadir)/doc/ngircd.
170 Older news (sorry, only available in german language):
172 ngIRCd 0.6.0, 2002-12-24
174 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
175 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
176 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
177 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
178 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
179 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
180 Der Default ist -1, "unlimitiert".
181 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
182 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
183 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
184 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
185 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
186 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
187 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
188 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
189 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
190 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
191 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
192 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
193 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
194 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
195 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
196 miteinander ueber komprimiert Links kommunizieren.
197 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
198 der Channels, in denen ein User Mitglied sein kann, begrent werden.
199 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
201 ngIRCd 0.5.0, 20.09.2002
203 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
204 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
205 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
206 dem "nativen" (ggf. pre-ANSI) Compiler.
207 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
208 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
209 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
210 wenn kein User mehr im Channel ist.
211 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
212 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
213 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
214 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
215 "AdminInfo2" und "AdminEMail".
216 - Invite- und Ban-Lists implementiert.
217 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
218 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
219 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
221 ngIRCd 0.4.2, 29.04.2002
223 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
224 Regular Expressions (bis auf "*") unterstuetzt.
226 ngIRCd 0.4.0, 01.04.2002
228 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
229 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
230 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
231 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
232 zusaetzliche Informationen.
233 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
234 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
235 nicht, so wird der naechste probiert.
236 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
237 einen Hash-Wert gesucht: sollte deutlich schneller sein.
238 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
239 gelesen und die dann verwendeten Werte angezeigt.
240 - Client-Mode "s" (Server Notices) implementiert.
241 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
242 alternative Konfigurationsdatei angegeben werden.
243 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
244 zu einer anderen User-ID und Group-ID wechseln.
246 ngIRCd 0.3.0, 02.03.2002
248 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
249 er auf den IRC-Befehl RESTART reagiert.
250 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
251 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
252 Zum Debuggen manchmal ganz praktisch :-)
253 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
254 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
255 - AWAY (und der User-Mode 'a') ist nun implementiert.
256 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
257 - Channel- und Nicknames werden nun ordentlich validiert.
259 ngIRCd 0.2.0, 15.02.2002
261 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
262 Server versteht an User-Modes o und v, beachtet letzteres allerdings
263 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
264 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
265 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
266 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
268 ngIRCd 0.1.0, 29.01.2002
270 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
271 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
272 Chatten in Channels ist aber natuerlich moeglich ;-)
273 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
274 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
275 - FAQ.txt in doc/ begonnen.
277 ngIRCd 0.0.3, 16.01.2002
279 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
280 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
281 IRC-Netzwerk arbeiten.
282 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
283 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
284 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
285 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
286 - neue Befehle: LUSERS, LINKS.
288 ngIRCd 0.0.2, 06.01.2002
290 - neuer Aufbau der Konfigurationsdatei,
291 - mehrere IRC-Operatoren koennen konfiguriert werden,
292 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
293 nur "leafed server" sein, d.h. keine "Client-Server" haben.
295 ngIRCd 0.0.1, 31.12.2001
297 - erste oeffentliche Version von ngIRCd als "public preview" :-)
301 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $