2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - implement RFC 2812 handling of "0" argument to 'JOIN':
16 must be treated as if the user had sent PART commands
17 for all channels the user is a member of. (Dana Dahlstrom)
18 - allow NOTICEs to be sent to a channel. (Fabian Schlager)
20 ngIRCd 0.11.0 (2008-01-15)
22 - Add support for /STAT u (server uptime) command.
23 - New [Server] configuration Option "Bind" allows to specify
24 the source ip adress to use when connecting to remote server.
25 - New configuration option "MaxNickLength" to specify the allowed maximum
26 length of user nick names. Note: must be unique in an IRC network!
27 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
28 - Added new server configuration option "Passive" for "Server" blocks to
29 disable automatic outgoing connections (similar to -p option to ngircd,
30 but only for the specified server). (Tassilo Schweyer)
31 - Added support for the WALLOPS command. Usage is restricted to IRC
34 ngIRCd 0.10.2 (2007-06-08)
36 - Predefined channel configuration now allows specification of channel key
37 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
38 - When using the epoll() IO interface, compile in the select() interface as
39 well and fall back to it when epoll() isn't available on runtime.
40 - Added support for IO APIs "poll()" and "/dev/poll".
42 ngIRCd 0.10.1 (2006-12-17)
44 - Allow PASS syntax defined in RFC 1459 for server links, too.
45 - New configuration option "PredefChannelsOnly": if set, clients can only
46 join predefined channels.
48 ngIRCd 0.10.0 (2006-10-01)
50 ngIRCd 0.10.0-pre1 (2006-08-02)
51 - Enhanced DIE to accept a single parameter ("comment text") which is sent
52 to all locally connected clients before the server goes down.
53 - JOIN now supports more than one channel key at a time.
54 - Implemented numeric "333": Time and user name who set a channel topic.
55 - Channel topics are no longer limited to 127 characters: now the only limit
56 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
57 limits the topic to about 490 characters due to protocol overhead).
58 - Reverse DNS lookup code now checks the result by doing an additional
59 lookup to prevent spoofing.
60 - Added new IO layer which (optionally) supports epoll() and kqueue() in
61 addition to the select() interface.
63 ngIRCd 0.9.0 (2005-07-24)
65 - Never run with root privileges but always switch the user ID.
66 - Make "netsplit" messages RFC compliant.
67 - Implemented the IRC function "WHOWAS".
68 - New configuration option "OperServerMode" to enable a workaround needed
69 when running an network with ircd2 servers and "OperCanUseMode" enabled
70 to prevent the ircd2 daemon to drop mode changes of IRC operators.
71 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
72 - Implemented support for "secret channels" (channel mode "s").
73 - New configuration option "Mask" for [Operator] sections to limit OPER
74 commands to users with a specific IRC mask. Patch from Florian Westphal.
75 - New configuration variable "PidFile", section "[Global]": if defined,
76 the server writes its process ID (PID) to this file. Default: off.
77 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
78 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
79 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
80 API will be autodetected when you call "./configure --with-rendezvous".
82 ngIRCd 0.8.0 (2004-06-26)
84 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
85 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
86 its root and working directory to something "safe". MotdPhrase is used
87 to define an "MOTD string" instead of a whole file, useful if the
88 "real" MOTD file would be outside the "jail".
89 - INVITE- and BAN-lists become synchronized between IRC+ servers when
90 establishing new connections, if the peer supports this as well.
91 - The type of service (TOS) of all sockets is set to "interactive" now.
92 - Added short command line option "-t" as alternative to "--configtest".
93 - Added optional support for "IDENT" lookups on incoming connections. You
94 have to enable this function with the ./configure switch "--with-ident".
95 The default is not to do IDENT lookups.
97 ngIRCd 0.7.5 (2003-07-11)
99 - New configuration variable "MaxConnectionsIP" to limit the number of
100 simultaneous connections from a single IP that the server will accept.
101 This configuration options lowers the risk of denial of service attacks
102 (DoS), the default is 5 connections per client IP.
103 - Added new configuration variable "Listen" to bind all listening
104 sockets of the server to a single IP address.
106 ngIRCd 0.7.1 (2003-07-18)
108 - Added support for GNU/Hurd.
110 ngIRCd 0.7.0 (2003-05-01)
112 - New command CONNECT to enable and add server links. The syntax is not
113 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
114 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
115 to add a new server (ngIRCd tries to connect new servers only once!).
116 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
117 - New command TRACE (you can trace only servers at the moment).
118 - New command HELP that lists all understood commands.
119 - ngIRCd can register itself with Rendezvous: to enable support pass the
120 new switch "--with-rendezvous" to configure.
121 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
122 configure to enable it.
123 - Changed some configure options to use "--with"/"--without" as prefix
124 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
125 "--with-tcp-wrappers", and "--with-rendezvous".
126 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
127 - Documentation is now installed in $(datadir)/doc/ngircd.
130 Older news (sorry, only available in german language):
132 ngIRCd 0.6.0, 2002-12-24
134 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
135 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
136 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
137 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
138 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
139 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
140 Der Default ist -1, "unlimitiert".
141 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
142 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
143 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
144 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
145 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
146 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
147 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
148 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
149 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
150 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
151 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
152 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
153 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
154 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
155 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
156 miteinander ueber komprimiert Links kommunizieren.
157 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
158 der Channels, in denen ein User Mitglied sein kann, begrent werden.
159 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
161 ngIRCd 0.5.0, 20.09.2002
163 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
164 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
165 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
166 dem "nativen" (ggf. pre-ANSI) Compiler.
167 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
168 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
169 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
170 wenn kein User mehr im Channel ist.
171 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
172 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
173 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
174 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
175 "AdminInfo2" und "AdminEMail".
176 - Invite- und Ban-Lists implementiert.
177 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
178 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
179 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
181 ngIRCd 0.4.2, 29.04.2002
183 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
184 Regular Expressions (bis auf "*") unterstuetzt.
186 ngIRCd 0.4.0, 01.04.2002
188 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
189 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
190 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
191 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
192 zusaetzliche Informationen.
193 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
194 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
195 nicht, so wird der naechste probiert.
196 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
197 einen Hash-Wert gesucht: sollte deutlich schneller sein.
198 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
199 gelesen und die dann verwendeten Werte angezeigt.
200 - Client-Mode "s" (Server Notices) implementiert.
201 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
202 alternative Konfigurationsdatei angegeben werden.
203 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
204 zu einer anderen User-ID und Group-ID wechseln.
206 ngIRCd 0.3.0, 02.03.2002
208 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
209 er auf den IRC-Befehl RESTART reagiert.
210 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
211 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
212 Zum Debuggen manchmal ganz praktisch :-)
213 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
214 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
215 - AWAY (und der User-Mode 'a') ist nun implementiert.
216 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
217 - Channel- und Nicknames werden nun ordentlich validiert.
219 ngIRCd 0.2.0, 15.02.2002
221 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
222 Server versteht an User-Modes o und v, beachtet letzteres allerdings
223 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
224 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
225 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
226 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
228 ngIRCd 0.1.0, 29.01.2002
230 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
231 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
232 Chatten in Channels ist aber natuerlich moeglich ;-)
233 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
234 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
235 - FAQ.txt in doc/ begonnen.
237 ngIRCd 0.0.3, 16.01.2002
239 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
240 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
241 IRC-Netzwerk arbeiten.
242 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
243 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
244 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
245 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
246 - neue Befehle: LUSERS, LINKS.
248 ngIRCd 0.0.2, 06.01.2002
250 - neuer Aufbau der Konfigurationsdatei,
251 - mehrere IRC-Operatoren koennen konfiguriert werden,
252 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
253 nur "leafed server" sein, d.h. keine "Client-Server" haben.
255 ngIRCd 0.0.1, 31.12.2001
257 - erste oeffentliche Version von ngIRCd als "public preview" :-)
261 $Id: NEWS,v 1.85 2008/02/05 14:41:50 fw Exp $