X-Git-Url: https://arthur.barton.de/cgi-bin/gitweb.cgi?p=ngircd-alex.git;a=blobdiff_plain;f=ChangeLog;h=3246ef57ded6bdc44bfbfb3f22930cd38613933e;hp=8bb75083d81231dbddde630977256835817ee059;hb=0de11ead3663a1248ae0f0f97a2896845774a7d4;hpb=bc1ac7fbc57bb6341b0b553c29d2da82464fc866 diff --git a/ChangeLog b/ChangeLog index 8bb75083..3246ef57 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,16 +1,421 @@ ngIRCd - Next Generation IRC Server + http://ngircd.barton.de/ - (c)2001-2009 Alexander Barton, - alex@barton.de, http://www.barton.de/ - + (c)2001-2012 Alexander Barton and Contributors. ngIRCd is free software and published under the terms of the GNU General Public License. -- ChangeLog -- -ngIRCd Release 15 +ngIRCd Release 19.1 + + - Really include _all_ patchtes to build the Anope module into the + distribution archive ... ooops! + - getpid.sh: Fix testcase error for Debian using sbuild(1). + - Don't log "ngIRCd hello message" two times when starting up. + +ngIRCd Release 19 (2012-02-29) + + - Update build system: bump config.guess and config.sub files used by + GNU autoconf/automake to recent versions. + - Fix configuration file parser: don't accept "[SSL]" blocks in the + configuration file when no SSL support is built in ngIRCd. + - Fix building ngIRCd with old gcc versions (e. g. 2.7.2). + - Correctly re-open syslog logging after reading of configuration + file: Syslog logging has been initialized before reading the + configuraton, so ngIRCd always used the default facility and ignored + the "SyslogFacility" configuration option ... + Thanks to Patrik Schindler for reporting this issue! + + ngIRCd 19~rc1 (2012-02-12) + - Enhance command limits for server links: the limit now is dependent + on the number of users connected in the network and higher while + servers are joining the network to make the login of servers faster. + - Log more information about server synchronization. + - Update preliminary ngIRCd protocol module for Anope 1.9.6, which now + is the only supported version. + - New numeric RPL_WHOISHOST_MSG(378), which returns the DNS hostname + (if available) and the IP address of a client in the WHOIS reply. + Only the user itself and local IRC operators get this numeric. + - Implement channel exception list (mode 'e'). This allows a channel + operator to define exception masks that allow users to join the + channel even when a "ban" would match and prevent them from joining: + the exception list (e) overrides the ban list (b). + - PRIVMSG and NOTICE: Handle nick!user@host masks case-insensitive. + - Implement user mode 'C': If the target user of a PRIVMSG or NOTICE + command has the user mode 'C' set, it is required that both sender + and receiver are on the same channel. This prevents private flooding + by completely unknown clients. + - New RPL_WHOISREGNICK_MSG(307) numeric in WHOIS command replies: it + indicates if a nick name is registered (if user mode 'R' set). + - Limit channel invite, ban, and exception lists to 50 entries and fix + duplicate check and error messages when adding already listed entries + or deleting no (longer) existing ones. + - Fix both ERR_SUMMONDISABLED(445) and ERR_USERSDISABLED(446) replies. + - MODE command: correctly return ERR_UNKNOWNMODE(472) numeric for + unknown channel modes, instead of ERR_UMODEUNKNOWNFLAG(501). + - ISUPPORT(005) numeric: add "O", "R", and "z" modes to "CHANMODES", + add "EXCEPTS=e" and "INVEX=I", add "MAXLIST=beI:50". + - Limit the number of list items in the reply of LIST (100), WHO (25), + WHOIS (10), and WHOWAS (25) commands. + - LIST command: compare pattern case insensitive. + - Limit the MODE command to handle a maximum number of 5 channel modes + that require an argument (+Ibkl) per call and report this number + in the ISUPPORT(005) numeric: "MODES=5". + - Fix handling of channel mode sequence with/without arguments. + For example, don't generate wrong error messages when handling + "MODE #chan +IIIIItn *!aa@b *!bb@c *!cc@d *!dd@e *!ee@f". + - When sending data on a connection, only try to get the type of + the client if there still is one assigned. This could trigger an + assertion and end the daemon in some error paths. + - Don't try to close already closed/invalid sockets to forked child + processes. This could potentially crash the daemon in some cases + with IDENT lookups enabled. + - WHOIS command: make sure that the reply ends with RPL_ENDOFWHOIS, + don't answer queries for IRC servers, make sure mask matching is + case-insensitive, and that RPL_ENDOFWHOIS numeric is sent with the + unmodified mask (like it has been received from the client). + - LINKS command: support parameter to limit the reply. + - Add 1 second penalty for every further target on PRIVMSG/NOTICE + commands: this reduces the possibility of flooding channels with + commands like "PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit. + Problem noticed by Cahata, thanks! + - Display correct error message when "Server{UID|GID}" variabe in the + configuration file is invalid (not a number and no existing user). + - Update Copyright notices for 2012 :-) + - JOIN command: don't stop handling of channel lists when a single + channel cannot be joined (because of bad name, wrong key or channel + limit reached), but report an error and continue. And don't check + the channel limit and don't report with "too many channels" when + trying to join a channel that the client already is a member of. + - ISON command: reply with the correct upper-/lowercase nick names. + - New configuration option "PAMIsOptional": when set, clients not + sending a password are still allowed to connect: they won't become + "identified" and keep the "~" character prepended to their supplied + user name. See "man 5 ngircd.conf" for details. + - Fixed handling of WHO commands. This fixes two bugs: "WHO " + returned nothing at all if the user was "+i" (reported by Cahata, + thanks) and "WHO " returned channel names instead + of "*" when the user was member of a (visible) channel. + - Fixed some spelling errors in documentation and code comments + (Thanks to Christoph Biedl). + - contrib/Debian/control: Update and complete "Build-Depends" and + update our Debian package descriptions with "official" ones. + - Fixed typo in two error messages. + - LUSERS reply: only count channels that are visible to the requesting + client, so the existence of secret channels is no longer revealed by + using LUSERS. Reported by Cahata, thanks! + - Unknown user and channel modes no longer stop the mode parser, but + are simply ignored. Therefore modes after the unknown one are now + handled. This is how ircd2.10/ircd2.11/ircd-seven behave, at least. + Reported by Cahata, thanks! + - README: Update list of implemented commands. + - Log better error messages when rejecting clients. + - Implement IRC commands "GLINE" and "KLINE" to ban users. G-Lines are + synchronized between server on peering, K-Lines are local only. + If you use "*!@" or "*!*@" masks, these connections + are blocked even before the user is fully logged in (before PASS, + NICK, and USER commands have been processed) and before the child + processes for authentication are forked, so resource usage is smaller. + - Xcode: update project file for Xcode 4.2 and define HAVE_GAI_STRERROR + for Mac OS X Xcode builds. + - ./configure: Fix logic and quoting of poll() detection code: only use + poll() when poll.h exists as well. + - Suppress 'Can't create pre-defined channel: invalid name: ""' message. + - whois-test: handle local hostname = "localhost.localdomain" using the + pattern "localhost*" for valid local hostnames. + - sample-ngircd.conf: show correct default for "PAM" variable: The + default of "PAM" is "yes" when ngIRCd has been configured to use it, + so show the correct default value in the sample configuration file. + (Closes #119) + - Update GPL 2 license text to current version. + - Only close "unrelated" sockets in forked child processes: This fixes + the problem that ngIRCd can't do any IDENT lookups because of the + socket has already been closed in the child process. + The bug has been introduced starting with ngIRCd 17 ... :-( + (commit ID 6ebb31ab35e) + - Added doc/Modes.txt: document modes supported by ngIRCd. + - Implement user mode "R": indicates that the nick name of this user + is "registered". This mode isn't handled by ngIRCd itself, but must + be set and unset by IRC services like Anope. + - Implement channel mode "R": only registered users (having the user + mode "R" set) are allowed to join this channel. + - Test suite: bind to loopback (127.0.0.1) interface only. + - New 2nd message "Nickname too long" for error code 432. + - Xcode: Mac OS X config.h: support 10.5 as well as 10.6/10.7 SDK. + - Xcode: exclude more Xcode 4 specific directories in ".gitignore". + - Disconnect directly linked servers sending QUIT. Without this, + the server becomes removed from the network and the client list, + but the connection isn't shut down at all ... + - contrib/ngindent: detect "gindent" as GNU indent. + - Handle unknown user and channel modes: these modes are saved and + forwarded to other servers, but ignored otherwise. + - Handle channel user modes 'a', 'h', and 'q' from remote servers. + These channel user modes aren't used for anything at the moment, + but ngIRCd knows that these three modes are "channel user modes" + and not "channel modes", that is that these modes take an "nick name" + argument. Like unknown user and channel modes, these modes are saved + and forwarded to other servers, but ignored otherwise. + - Correctly inform clients when other servers change their user modes. + This is required for some services to work correctly. + - Test suite: make getpid.sh work even when run as root. + - Spoofed prefixes: close connection on non-server links only. + On server-links, spoofed prefixes can happen because of the + asynchronous nature of the IRC protocol. So don't break server- + links, only log a message and ignore the command. (Closes #113) + +ngIRCd Release 18 (2011-07-10) + + - Update timestamp of ngircd(8) manual page. + - Add preliminary ngIRCd protocol module for Anope 1.9 to contrib/Anope/. + - Don't register WHOWAS information when "MorePrivacy" option is in effect. + + ngIRCd 18~rc2 (2011-06-29) + - Update documentation, fix some wording, and use a spellchecker :-) + - ngircd.conf.5: strip "SSL" prefix from variables in [SSL] section. + - ngircd.8: document debugging options. + - GnuTLS: use 1024 bits as minimum size of the DH prime. This enables + ngIRCd to accept incoming connections from other servers and clients + that "only" use at least 1024 bits again, like ngIRCd 17 did (and no + longer requires 2048 bits for incoming connections). + + ngIRCd 18~rc1 (2011-06-27) + - PAM warning message: make clear which "Password" config option is ignored. + - New configuration option "MorePrivacy" to "censor" some user information. + When enabled, signon time and idle time is left out. Part and quit + messages are made to look the same. WHOWAS requests are silently dropped. + All of this is useful if one wish to conceal users that access the ngircd + servers from TOR or I2P. + - New configuration option "ScrubCTCP" to scrub incoming CTCP commands. If + activated, the server silently drops incoming CTCP requests from both + other servers and from users. The server that scrubs CTCP will not forward + the CTCP requests to other servers in the network either, which can spell + trouble if not every oper knows about the CTCP-scrubbing. Scrubbing CTCP + commands also means that it is not possible to send files between users. + There is one exception to the CTCP scrubbing performed: ACTION ("/me + commands") requests are not scrubbed. + - Display configuration errors more prominent on "--configtest". + - Restructure ngIRCd configuration file: introduce new [Limits], [Options], + and [SSL] sections. The intention of this restructuring is to make the + [Global] section much cleaner, so that it only contains variables that + most installations must adjust to the local requirements. All the optional + variables are moved to [Limits], for configurable limits and timers of + ngIRCd, and [Options], for optional features. All SSL-related variables + are moved to [SSL] and the "SSL"-prefix is stripped. The old variables in + the [Global] section are deprecated now, but are still recognized. + => Don't forget to check your configuration, use "ngircd --configtest"! + - New documentation "how to contribute": doc/Contributing.txt. + - Slightly fix error handling when connecting to remote servers. + - GnuTLS: bump DH-bitsize to 2048: this solves the problem that some clients + refuse to connect to severs that only offer 1024. For interoperability it + would be best to just use 4096 bits, but that takes minutes, even on + current hardware ... + - contrib/platformtest.sh: fix gcc version detection. + - Avoid needlessly scary 'buffer overflow' messages: When the write buffer + space grows too large, ngIRCd has to disconnect the client to avoid + wasting too much memory, which is logged with a scary 'write buffer + overflow' message. Change this to a more descriptive wording. + - Require server prefixes for most commands on RFC2812 links. RFC1459 links + (often used by services, for example) are not affected. + - Mac OS X: update installer functionality, texts, and add our logo :-) + - New configuration option "RequireAuthPing": PING-PONG on login. When + enabled, this configuration option lets ngIRCd send a PING with an numeric + "token" to clients logging in; and it will not become registered in the + network until the client responds with the correct PONG. + - New configuration option "NoticeAuth": send NOTICE AUTH on connect. When + active, ngircd will send "NOTICE AUTH" messages on client connect time + like e.g. snircd (QuakeNet) does. + - Generate WALLOPS message on SQUIT from IRC operators; so SQUIT now behaves + like CONNECT and DISCONNECT commands, when called by an IRC operator. + - Allow servers to send more commands in the first 10 seconds ("burst"). This + helps to speed up server login and network synchronization. + - Add support for up to 3 targets in WHOIS queries, also allow up to one + wildcard query from local hosts. Follows ircd 2.10 implementation rather + than RFC 2812. At most 10 entries are returned per wildcard expansion. + - ngircd.conf(5) manual page: describe types of configuration variables + (booleans, text strings, integer numbers) and add type information to each + variable description. + - Don't use "the.net" in sample-ngircd.conf, use "example.net". + - Terminate incoming connections on HTTP commands "GET" and "POST". + - New configuration option "CloakHost": when set, this hostname is used for + every client instead of the real DNS hostname (or IP address). + - New configuration option "CloakUserToNick": when enabled, ngIRCd sets + every clients' user name to their nick name and hides the user name + supplied by the IRC client. + - doc/Protocol.txt: Update description of the CHANINFO and WEBIRC commands. + - Doxygen'ify (document) much more source files; code cleanup ... + - Make write buffers bigger, but flush early. Before this change, a client + got disconnected if the buffer flushing at 4k failed, now regular clients + can store up to 32k and servers up 64k even if flushing is not possible at + the moment. This enhances reliability on slow links. + - Don't access possibly free'd CLIENT structure. Ooops. + - Allow "Port = 0" in [Server] blocks. Port number 0 marks remote servers + that try to connect to this daemon, but where this daemon never tries to + establish a connection on its own: only incoming connections are allowed. + - Configuration: fix 'Value of "..." is not a number!' for negative values. + - Enable WHOIS command to return information about services. + - Implement channel mode 'O': "IRC operators only". This channel mode is + used on DALnet (bahamut), for example. + - Remove support for ZeroConf/Bonjour/Rendezvous service registration + including the "[No]ZeroConf" configuration option. + - TOPIC command: test for channel admin rights correctly: this enables other + servers, services and IRC operators to change channel topics, even when + the client is not joined to this channel. + - Deprecate NoXX-Options in ngircd.conf and move new variants into our new + [Options] section: 'NoDNS=no' => 'DNS=yes', 'NoIdent=no' => 'Ident=yes', + 'NoPAM=no' => 'PAM=yes', and 'NoZeroConf=no' => 'ZeroConf=yes' (and + vice-versa). The defaults are adjusted accordingly and the old variables + in [Global] are still accepted, so there is no functional change. + - Fix confusing "adding to invite list" debug messages: adding entries to + ban list produced 'invite list' debug output ... + - Don't throttle services and servers being registered. + - Xcode: correctly sort files :-) + - Don't assert() when searching a client for an invalid server token (this is + only relevant when a trusted server on a server-server link sends invalid + commands). + +ngIRCd Release 17.1 (2010-12-19) + + - --configtest: remember if MOTD is configured by file or phrase + - Enhance log messages when establishing server links a little bit + - Reset ID of outgoing server link on DNS error correctly + - Don't log critical (or worse) messages to stderr + - Manual page ngircd(8): add SIGNALS section + - Manual pages: update and simplify AUTHORS section + - Remove "error file" when compiled with debug code enabled + - README: Updated list of implemented commands + - add doc/README-Interix.txt and doc/Bopm.txt to distribution tarball + - Merge branch 'numeric-329' + - add doc/PAM.txt to distribution tarball + - New numeric 329: get channel creation time on "MODE #chan" commands + - Save channel creation time; new function Channel_CreationTime() + +ngIRCd Release 17 (2010-11-07) + + - doc: change path names in sample-ngircd.conf depending on sysconfdir + - Fix up generation and distribution of sample-ngircd.conf + - contrib/ngircd-redhat.init: updated email address of Naoya Nakazawa + - contrib/platformtest.sh: make command name quoting consistent + + ngIRCd 17~rc3 (2010-10-27) + - Xcode builds: detect version number correctly, updateed project file + to use the Mac OS X 10.5.x SDK, disable pam_fail_delay() because it + is only available starting with Mac OS X 10.6, and generate a default + PAM configuration for the Mac OS X Installer.app package of ngIRCd. + - Debian: updated standards version to 3.9.1, added libpam0g-dev to the + dependencies, and install a default /etc/pam.d/ngircd allowing all logins. + - Make contrib/platformtest.sh more portable. + - Fix connect attempts to further IP addresses of outgoing server links. + + ngIRCd 17~rc2 (2010-10-25) + - ZeroConf: include header files missing since commit a988bbc86a. + - Generate ngIRCd version number from GIT tag. + - Make sourcecode compatible with ansi2knr again. This allows to compile + ngIRCd using a pre-ANSI K&R C compiler again. + - ./configure: check if C compiler can compile ISO Standard C. + - ./configure: check support for C prototypes again. + - Don't use PARAMS() macro for function implementations. + - Added m68k/apple/aux3.0.1 (gcc 2.7.2) to doc/Platforms.txt. + - Only try to set FD_CLOEXEC if this flag is defined. + - Only use "__attribute__ ((unused))" if GCC >=2.8 is used. + - doc/Makefile.am: don't set docdir, automake handles it already. + + ngIRCd 17~rc1 (2010-10-11) + - New configuration option "NoZeroConf" to disable service registration at + runtime even if ngIRCd is compiled with support for ZeroConf (e.g. using + Howl, Avahi or on Mac OS X). + - New configuration option "SyslogFacility" to define the syslog "facility" + (the "target"), to which ngIRCd should send its log messages. + Possible values are system dependant, but most probably "auth", "daemon", + "user" and "local1" through "local7" are possible values; see syslog(3). + Default is "local5" for historical reasons. + - Dump the "internal server state" (configured servers, established + connections and known clients) to the console or syslog when receiving + the SIGUSR2 signal and debug mode is enabled. + - Enable the daemon to disable and enable "debug mode" on runtime using + signal SIGUSR1, when debug code is compiled in, not only on startup + using the command line parameters. + - Signal handler: added new 'delayed' signal handlers, including fallback + to deprecated sysv API. And removed global NGIRCd_SignalRehash variable. + - IO: add io_cloexec() to set close-on-exec flag. + - ng_ipaddr.h: include required assert.h header. + - Conn_SyncServerStruct(): test all connections; and work case insensitive + - configure script: correctly indent IPv6 yes/no summary output. + - Don't reset My_Connections[Idx].lastping when reading data, so the + client lag debug-output is working again. + - Implement user mode "x": hostname cloaking (closes: #102). + - Make configure switch "--docdir" work (closes: #108). + - Reformat and update FAQ.txt a little bit. + - INSTALL: mention SSL, IPv6, and changed handling of MotdFile. + - Change MOTD file handling: ngIRCd now caches the contens of the MOTD + file, so the daemon now requires a HUP signal or REHASH command to + re-read the MOTD file when its content changed. + - Startup: open /dev/null before chroot'ing the daemon. + - Allow IRC ops to change channel modes even without OperServerMode set. + - Allow IRC operators to use MODE command on any channel (closes: #100). + - Added mailmap file for git-[short]log and git-blame. + - Authenticated users should be registered without the "~" mark. + - Set NoPAM=yes in configuration files used for the testsuite. + - New configuration option "NoPAM" to disable PAM. + - Implement asynchronous user authentication using PAM, please see the + file doc/PAM.txt for details. + - Resolver: Implement signal handler and catch TERM signals. + - Don't set a penalty time when doing DNS lookups. + - Add some documentation for using BOPM with ngIRCd, see doc/Bopm.txt. + - Implement user mode "c": receive connect/disconnect NOTICEs. Note that + this new mode requires the user to be an IRC operator. + - ngircd.init: require "$network" and "$remote_fs" when stopping ngircd. + - Show SSL status in WHOIS output, numeric 275. + - Include correct header files when testing for arpa/inet.h (Closes: #105). + - Don't access already freed memory in IRC_KILL(). + - Fix "beeing" typo ... + - SSL/TLS: fix bogus "socket closed" error message. + +ngIRCd Release 16 (2010-05-02) + + - doc/SSL: remove line continuation marker + + ngIRCd 16~rc2 (2010-04-25) + - Updated some more copyright notices, it's 2010 already :-) + - Only compile in Get_Error() if really needed + - Fix gcc warning "ignoring return value of ..." + - Include netinet/in_systm.h alongside netinet/ip.h + - Include netinet/{in.h, in_systm.h} when checking for netinet/ip.h + - Only include if it exists + - Updated doc/Platforms.txt + - Enhace connection statistics counters: display total number of served + connections on daemon shutdown and when a new client connects using + the new numeric RPL_STATSCONN (250). + + ngIRCd 16~rc1 (2010-03-25) + - Various fixes to the build system and code cleanups. + - contrib/platformtest.sh: Only show latest commit. + - Updatet doc/Platforms.txt, added new README-Interix.txt documenting + how to tun ngIRCd on Microsoft Services for UNIX (MS SFU, MS SUA). + - Updated links to the ngIRCd homepage (bug tracker, mailing list). + - Added missing modes to USERMODES #define + - Show our name (IRCD=ngIRCd) in ISUPPORT (005) numeric + - Quote received messages of ERROR commands in log output. + - ngircd.conf manual page: document missing "Password" variable. + - Implement WEBIRC command used by some Web-IRC frontends. The password + required to secure this command must be configured using the new + "WebircPassword" variable in the ngircd.conf file. + - Don't use port 6668 as example for both "Ports" and "SSLPorts". + - Remove limit on max number of configured irc operators. + - Only link "nsl" library when really needed. + - A new channel mode "secure connections only" (+z) has been implemented: + Only clients using a SSL encrypted connection to the server are allowed + to join such a channel. + But please note three things: a) already joined clients are not checked + when setting this mode, b) IRC operators are always allowed to join + every channel, and c) remote clients using a server not supporting this + mode are not checked either and therefore always allowed to join. + +ngIRCd Release 15 (2009-11-07) + + - "ngircd --configtest": print SSL configuration options even when unset. ngIRCd 15~rc1 (2009-10-15) - Do not add default listening port (6667) if SSL ports were specified, so @@ -549,7 +954,7 @@ ngIRCd 0.6.0, 2002-12-24 werden (beide Server versuchen sich dann gegenseitig zu connectieren). - Test-Suite und Dokumentation an A/UX angepasst. - unter HP-UX definiert das configure-Script nun _XOPEN_SOURCE_EXTENDED. - - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das + - Server identifizieren sich nun mit asynchronen Passwoertern, d.h. das Passwort, welches A an B schickt, kann ein anderes sein als das, welches B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server", wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt. @@ -679,7 +1084,7 @@ ngIRCd 0.5.0, 20.09.2002 - Protokoll- und Server-ID bei PASS-Befehlen auf neues Format umgestellt; bei empfangenen PASS-Befehlen werden diese zudem nun auch ausgewertet. Die unterstuetzten Flags sind in doc/Protocol.txt beschrieben. - - mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+- + - mit dem neuen Befehl CHANINFO synchronisieren Server, die das IRC+- Protokoll unterstuetzen, Channel-Modes und Topics. - neue Option "--disable-ircplus" fuer das configure-Script, um das IRC+-Protokoll abzuschalten (per Default ist es aktiviert). @@ -784,7 +1189,7 @@ ngIRCd 0.3.0, 02.03.2002 - PRIVMSG beachtet nun die Channel-Modes "n" und "m". - AWAY implementiert. PRIVMSG, MODE, USERHOST und WHOIS angepasst. - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl). - - ausgehende Server-Verbindungen werden nun asyncron connectiert und + - ausgehende Server-Verbindungen werden nun asynchron connectiert und blockieren nicht mehr den ganzen Server, wenn die Gegenseite nicht erreicht werden kann (bis zum Timeout konnten Minuten vergehen!). - Wert der Konfigurations-Variable "ConnectRetry" wird besser beachtet. @@ -863,7 +1268,7 @@ ngIRCd 0.0.2, 06.01.2002 - NICK kann nun die Gross- und Kleinschreibung eines Nicks aendern. - ein Server-Passwort ist nun konfigurierbar. - neue Befehle: ERROR, SERVER, NJOIN (nur als "Fake"), SQUIT. - - Asyncroner Resolver Hostname->IP implementiert. + - Asynchroner Resolver Hostname->IP implementiert. - Server-Links teilweise implementiert: bisher kann der ngIRCd jedoch nur "leafed server" sein, d.h. keine "Client-Server" haben. Einige Befehle sind auch noch nicht (optimal) angepasst: PRIVMSG funktioniert