.\"
.\" ngircd.conf(5) manual page template
.\"
-.TH ngircd.conf 5 "Oct 2014" ngIRCd "ngIRCd Manual"
+.TH ngircd.conf 5 "Sep 2023" ngIRCd "ngIRCd Manual"
.SH NAME
ngircd.conf \- configuration file of ngIRCd
.SH SYNOPSIS
.PP
There can be more than one [Operator], [Server] and [Channel] section per
configuration file, one for each operator, server, and channel. [Global],
-[Limits], [Options], and [SSL] sections can occure multiple times, too, but
+[Limits], [Options], and [SSL] sections can occur multiple times, too, but
each variable overwrites itself, only the last assignment is relevant.
.SH [GLOBAL]
The
These settings depend on your personal preferences, so you should make sure
that they correspond to your installation and setup!
.TP
-\fBName\fR (string; required)
+\fBName\fR (string)
Server name in the IRC network. This is an individual name of the IRC
server, it is not related to the DNS host name. It must be unique in the
-IRC network and must contain at least one dot (".") character.
+IRC network and must contain at least one dot (".") character. When not set,
+ngIRCd tries to deduce a valid IRC server name from the local host name.
.TP
\fBAdminInfo1\fR, \fBAdminInfo2\fR, \fBAdminEMail\fR (string)
Information about the server and the administrator, used by the ADMIN
Text file which contains the ngIRCd help text. This file is required
to display help texts when using the "HELP <cmd>" command.
Please note: Changes made to this file take effect when ngircd starts up
-or is instructed to re-read its configuration file.
+or is instructed to re-read its configuration file. Default: a built-in
+standard path.
.TP
\fBInfo\fR (string)
Info text of the server. This will be shown by WHOIS and LINKS requests for
-example.
+example. Set to the server software name and version by default.
.TP
\fBListen\fR (list of strings)
A comma separated list of IP address on which the server should listen.
Text file with the "message of the day" (MOTD). This message will be shown to
all users connecting to the server. Please note: Changes made to this file
take effect when ngircd starts up or is instructed to re-read its
-configuration file.
+configuration file. Default: a built-in standard path.
.TP
\fBMotdPhrase\fR (string)
-A simple Phrase (<256 chars) if you don't want to use a MOTD file.
+A simple Phrase (<127 chars) if you don't want to use a MOTD file.
.TP
\fBNetwork\fR (string)
The name of the IRC network to which this server belongs. This name is
note that all servers in an IRC network MUST use the same maximum nickname
length!
.TP
+\fBMaxPenaltyTime\fR (number)
+Maximum penalty time increase in seconds, per penalty event. Set to -1 for no
+limit (the default), 0 to disable penalties altogether. ngIRCd doesn't use
+penalty increases higher than 2 seconds during normal operation, so values
+greater than 1 rarely make sense.
+.TP
\fBMaxListSize\fR (number)
Maximum number of channels returned in response to a LIST command. Default: 100.
.TP
\fBIncludeDir\fR (string)
Directory containing configuration snippets (*.conf), that should be read in
after parsing the current configuration file.
-Default: none.
+Default: a built-in directory name when no configuration file was explicitly
+given on the command line (check "ngircd --configtest"), none (empty)
+otherwise.
+.PP
+.RS
+This way no default include directory is used when a possibly non-default
+configuration file was explicitly specified using "--config"/"-f" on the
+command line which (intentionally) did not specify an
+.I "IncludeDir"
+directive.
+.RE
.TP
\fBMorePrivacy\fR (boolean)
This will cause ngIRCd to censor user idle time, logon time as well as the
too easy to collect statistics on the users.
Default: no.
.TP
-\fBNoticeAuth\fR (boolean)
+\fBNoticeBeforeRegistration\fR (boolean)
Normally ngIRCd doesn't send any messages to a client until it is registered.
-Enable this option to let the daemon send "NOTICE AUTH" messages to clients
+Enable this option to let the daemon send "NOTICE *" messages to clients
while connecting. Default: no.
.TP
\fBOperCanUseMode\fR (boolean)
don't have a "~" character prepended to their respective user names!
Default: no.
.TP
+\fBPAMServiceName\fR (string)
+When PAM is enabled, this value determines the used PAM configuration.
+This setting allows running multiple ngIRCd instances with different
+PAM configurations on each instance. If you set it to "ngircd-foo",
+PAM will use /etc/pam.d/ngircd-foo instead of the default
+/etc/pam.d/ngircd.
+Default: ngircd.
+.TP
\fBRequireAuthPing\fR (boolean)
Let ngIRCd send an "authentication PING" when a new client connects, and
register this client only after receiving the corresponding "PONG" reply.
section. Please note that this whole section is only recognized by ngIRCd
when it is compiled with support for SSL using OpenSSL or GnuTLS!
.TP
+\fBCAFile\fR (string)
+Filename pointing to the Trusted CA Certificates. This is required for
+verifying peer certificates.
+.TP
\fBCertFile\fR (string)
SSL Certificate file of the private server key.
.TP
Please see 'man 1ssl ciphers' (OpenSSL) and 'man 3 gnutls_priority_init'
(GnuTLS) for details.
.TP
+\fBCRLFile\fR (string)
+Filename of Certificate Revocation List.
+.TP
\fBDHFile\fR (string)
Name of the Diffie-Hellman Parameter file. Can be created with GnuTLS
"certtool \-\-generate-dh-params" or "openssl dhparam". If this file is not
Other servers are configured in
.I [Server]
sections. If you configure a port for the connection, then this ngIRCd
-tries to connect to to the other server on the given port (active);
+tries to connect to the other server on the given port (active);
if not, it waits for the other server to connect (passive).
.PP
ngIRCd supports "server groups": You can assign an "ID" to every server
\fBSSLConnect\fR (boolean)
Connect to the remote server using TLS/SSL. Default: false.
.TP
+\fBSSLVerify\fR (boolean)
+Verify the TLS certificate presented by the remote server. Default: yes.
+.TP
\fBServiceMask\fR (string)
Define a (case insensitive) list of masks matching nicknames that should be
treated as IRC services when introduced via this remote server, separated
Topic for this channel.
.TP
\fBModes\fR (string)
-Initial channel modes.
+Initial channel modes, as used in "MODE" commands. Modifying lists (ban list,
+invite list, exception list) is supported.
+.PP
+.RS
+This option can be specified multiple times, evaluated top to bottom.
+.RE
.TP
-\fBKey\fR (string)
-Sets initial channel key (only relevant if channel mode "k" is set).
+\fBAutojoin\fR (boolean)
+Should ngIRCd automatically join ("autojoin") all users to this channel on
+connect? Note: The users must have permissions to access the channel, otherwise
+joining them will fail!
.TP
\fBKeyFile\fR (string)
Path and file name of a "key file" containing individual channel keys for
without problems, but moving or deleting the file will have not effect until
the daemon re-reads its configuration!
.RE
-.TP
-\fBMaxUsers\fR (number)
-Set maximum user limit for this channel (only relevant if channel mode "l"
-is set).
.SH HINTS
It's wise to use "ngircd \-\-configtest" to validate the configuration file
after changing it. See
projects / ngircd-alex.git / blobdiff