-# $Id: sample-ngircd.conf,v 1.5 2002/03/12 16:08:31 alex Exp $
-
#
-# Das ist eine Beispiel-Konfiguration fuer den ngIRCd, die an die
-# jeweiligen Beduerfnisse angepasst werden kann/muss.
+# This is a sample configuration file for the ngIRCd IRC daemon, which must
+# be customized to the local preferences and needs.
+#
+# Comments are started with "#" or ";".
+#
+# A lot of configuration options in this file start with a ";". You have
+# to remove the ";" in front of each variable to actually set a value!
+# The disabled variables are shown with example values for completeness only
+# and the daemon is using compiled-in default settings.
+#
+# Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the
+# server interprets the configuration file as expected!
#
-# Kommentare werden mit "#" oder ";" eingeleitet.
+# Please see ngircd.conf(5) for a complete list of configuration options.
#
[Global]
+ # The [Global] section of this file is used to define the main
+ # configuration of the server, like the server name and the ports
+ # on which the server should be listening.
- #
- # Im [Global]-Abschnitt der Konfigurationsdatei wird der Server
- # "an sich" konfiguriert.
- #
-
- # Servername im IRC-Netz
+ # Server name in the IRC network, must contain at least one dot
+ # (".") and be unique in the IRC network. Required!
Name = irc.the.net
- # Info-Text des Servers
+ # Info text of the server. This will be shown by WHOIS and
+ # LINKS requests for example.
Info = Server Info Text
- # Ports, auf denen Verbindungen angenommen werden sollen. Es koennen
- # mehrere Ports mit "," getrennt angegeben werden.
- Ports = 6667, 6668, 6669
+ # Global password for all users needed to connect to the server.
+ # (Default: not set)
+ ;Password = abc
- # Textdatei mit der "Message of the Day" (MOTD)
- MotdFile = /usr/local/etc/ngircd.motd
+ # Password required for using the WEBIRC command used by some
+ # Web-to-IRC gateways. If not set/empty, the WEBIRC command can't
+ # be used. (Default: not set)
+ ;WebircPassword = xyz
- # Nach <PingTimeout> Sekunden verschickt der Server bei Inaktivitaet
- # von einem Client diesem ein PING.
- PingTimeout = 120
+ # Information about the server and the administrator, used by the
+ # ADMIN command. Not required by server but by RFC!
+ ;AdminInfo1 = Description
+ ;AdminInfo2 = Location
+ ;AdminEMail = admin@irc.server
+
+ # Ports on which the server should listen. There may be more than
+ # one port, separated with ",". (Default: 6667)
+ ;Ports = 6667, 6668, 6669
- # Antwortet ein Client, der ein PING bekam, nicht innerhalb von
- # <PongTimeout> Sekunden mit einem PONG, so wird er disconnectiert.
- PongTimeout = 10
+ # Additional Listen Ports that expect SSL/TLS encrypted connections
+ ;SSLPorts = 6697, 9999
- # Der Server versucht alle <ConnectRetry> Sekunden, noch nicht bzw.
- # nicht mehr connectierte Server-Links aufzubauen.
- ConnectRetry = 60
+ # SSL Server Key
+ ;SSLKeyFile = /usr/local/etc/ngircd/ssl/server-key.pem
+ # password to decrypt SSLKeyFile (OpenSSL only)
+ ;SSLKeyFilePassword = secret
-[Operator]
+ # SSL Server Key Certificate
+ ;SSLCertFile = /usr/local/etc/ngircd/ssl/server-cert.pem
- #
- # Mit einem [Operator]-Block wird der Name und das Passwort eines
- # IRC-Operators konfiguriert. Es darf mehrere [Operator]-Bloecke
- # geben (fuer jeden Operator einen).
- #
+ # Diffie-Hellman parameters
+ ;SSLDHFile = /usr/local/etc/ngircd/ssl/dhparams.pem
+
+ # comma separated list of IP addresses on which the server should
+ # listen. Default values are:
+ # "0.0.0.0" or (if compiled with IPv6 support) "::,0.0.0.0"
+ # so the server listens on all IP addresses of the system by default.
+ ;Listen = 127.0.0.1,192.168.0.1
+
+ # Syslog "facility" to which ngIRCd should send log messages.
+ # Possible values are system dependant, but most probably auth, daemon,
+ # user and local1 through local7 are possible values; see syslog(3).
+ # Default is "local5" for historical reasons, you probably want to
+ # change this to "daemon", for example.
+ SyslogFacility = local1
+
+ # Text file with the "message of the day" (MOTD). This message will
+ # be shown to all users connecting to the server:
+ ;MotdFile = /usr/local/etc/ngircd.motd
+
+ # A simple Phrase (<256 chars) if you don't want to use a motd file.
+ ;MotdPhrase = "Hello world!"
+
+ # User ID under which the server should run; you can use the name
+ # of the user or the numerical ID. ATTENTION: For this to work the
+ # server must have been started with root privileges! In addition,
+ # the configuration and MOTD files must be readable by this user,
+ # otherwise RESTART and REHASH won't work!
+ ;ServerUID = 65534
+
+ # Group ID under which the ngircd should run; you can use the name
+ # of the group or the numerical ID. ATTENTION: For this to work the
+ # server must have been started with root privileges!
+ ;ServerGID = 65534
+
+ # A directory to chroot in when everything is initialized. It
+ # doesn't need to be populated if ngIRCd is compiled as a static
+ # binary. By default ngIRCd won't use the chroot() feature.
+ # ATTENTION: For this to work the server must have been started
+ # with root privileges!
+ ;ChrootDir = /var/empty
+
+ # This tells ngircd to write its current process id to a file.
+ # Note that the pidfile is written AFTER chroot and switching uid,
+ # i. e. the Directory the pidfile resides in must be writeable by
+ # the ngircd user and exist in the chroot directory.
+ ;PidFile = /var/run/ngircd/ngircd.pid
+
+ # After <PingTimeout> seconds of inactivity the server will send a
+ # PING to the peer to test whether it is alive or not.
+ ;PingTimeout = 120
+
+ # If a client fails to answer a PING with a PONG within <PongTimeout>
+ # seconds, it will be disconnected by the server.
+ ;PongTimeout = 20
+
+ # The server tries every <ConnectRetry> seconds to establish a link
+ # to not yet (or no longer) connected servers.
+ ;ConnectRetry = 60
+
+ # Should IRC Operators be allowed to use the MODE command even if
+ # they are not(!) channel-operators?
+ ;OperCanUseMode = no
+
+ # Mask IRC Operator mode requests as if they were coming from the
+ # server? (This is a compatibility hack for ircd-irc2 servers)
+ ;OperServerMode = no
+
+ # Are remote IRC operators allowed to control this server, e. g.
+ # use commands like CONNECT, SQUIT, DIE, ...?
+ ;AllowRemoteOper = no
+
+ # Allow Pre-Defined Channels only (see Section [Channels])
+ ;PredefChannelsOnly = no
+
+ # Don't do any DNS lookups when a client connects to the server.
+ ;NoDNS = no
+
+ # Don't do any IDENT lookups, even if ngIRCd has been compiled
+ # with support for it.
+ ;NoIdent = no
+
+ # Don't use PAM, even if ngIRCd has been compiled with support for it.
+ ;NoPAM = no
+
+ # Don't use ZeroConf service registration, even if ngIRCd has been
+ # compiled with support for it (e.g. Howl, Avahi, Mac OS X).
+ ;NoZeroConf = no
- # ID des IRC-Operators (muss nicht mit dem Nick identisch sein).
+ # try to connect to other irc servers using ipv4 and ipv6, if possible
+ ;ConnectIPv6 = yes
+ ;ConnectIPv4 = yes
+
+ # Maximum number of simultaneous in- and outbound connections the
+ # server is allowed to accept (0: unlimited):
+ ;MaxConnections = 0
+
+ # Maximum number of simultaneous connections from a single IP address
+ # the server will accept (0: unlimited):
+ ;MaxConnectionsIP = 5
+
+ # Maximum number of channels a user can be member of (0: no limit):
+ ;MaxJoins = 10
+
+ # Maximum length of an user nick name (Default: 9, as in RFC 2812).
+ # Please note that all servers in an IRC network MUST use the same
+ # maximum nick name length!
+ ;MaxNickLength = 9
+
+[Operator]
+ # [Operator] sections are used to define IRC Operators. There may be
+ # more than one [Operator] block, one for each local operator.
+
+ # ID of the operator (may be different of the nick name)
;Name = TheOper
- # Passwort des IRC-Operators
+ # Password of the IRC operator
;Password = ThePwd
+ # Optional Mask from which /OPER will be accepted
+ ;Mask = *!ident@somewhere.example.com
-[Server]
+[Operator]
+ # More [Operator] sections, if you like ...
+[Server]
+ # Other servers are configured in [Server] sections. If you
+ # configure a port for the connection, then this ngircd tries to
+ # connect to to the other server on the given port; if not it waits
+ # for the other server to connect.
+ # There may be more than one server block, one for each server.
#
- # In [Server]-Bloecken werden Server konfiguriert, zu denen dieser
- # Server sich verbinden soll bzw. von denen Verbindungen angekommen
- # werden duerfen.
- # Es koennen mehrere Server konfiguriert werden, d.h. [Server]-
- # Bloecke koennen mehrfach vorkommen.
- # Ist fuer einen Server ein Port konfiguriert, so versucht dieser
- # Server die Gegenseite zu connectieren. Ist kein Port vorgegeben,
- # so wartet dieser Server auf eine Verbindung der Gegenseite.
- #
- # Server-Gruppen:
- # Fuer jeden Server kann (optinal!) eine Gruppe konfiguriert werden,
- # zu der er gehoert (wird nur beachtet, wenn ein Port konfiguriert
- # ist!): eine solche Server-Gruppe wird quasi als ein Server ange-
- # sehen, der ngIRCd baut also nur eine Verbindung auf. Schlaegt die
- # Verbindung zu einem Server in einer Gruppe fehl, so wird der
- # naechste Server in der Gruppe probiert.
- #
+ # Server Groups:
+ # The ngIRCd allows "server groups": You can assign an "ID" to every
+ # server with which you want this ngIRCd to link. If a server of a
+ # group won't answer, the ngIRCd tries to connect to the next server
+ # in the given group. But the ngircd never tries to connect to two
+ # servers with the same group ID.
- # Hostname des Servers
+ # IRC name of the remote server, must match the "Name" variable in
+ # the [Global] section of the other server (when using ngIRCd).
+ ;Name = irc2.the.net
+
+ # Internet host name or IP address of the peer (only required when
+ # this server should establish the connection).
;Host = connect-to-host.the.net
- # IRC-Name des Servers
- ;Name = irc2.the.net
+ # IP address to use as _source_ address for the connection. if
+ # unspecified, ngircd will let the operating system pick an address.
+ ;Bind = 10.0.0.1
- # Port, zu dem dieser Server eine Verbindung herstellen soll. Wird
- # kein Port angegeben, so wird auf eine Verbindung der Gegenseite
- # gewartet.
- ;Port = 6666
+ # Port of the server to which the ngIRCd should connect. If you
+ # assign no port the ngIRCd waits for incoming connections.
+ ;Port = 6667
- # Passwort fuer diese Verbindung
- ;Password = ThePwd1
+ # Own password for the connection. This password has to be configured
+ # as "PeerPassword" on the other server.
+ ;MyPassword = MySecret
- # Gruppe, zu der dieser Server gehoert (optional).
+ # Foreign password for this connection. This password has to be
+ # configured as "MyPassword" on the other server.
+ ;PeerPassword = PeerSecret
+
+ # Group of this server (optional)
;Group = 123
+ # Set the "Passive" option to "yes" if you don't want this ngIRCd to
+ # connect to the configured peer (same as leaving the "Port" variable
+ # empty). The advantage of this option is that you can actually
+ # configure a port an use the IRC command CONNECT more easily to
+ # manually connect this specific server later.
+ ;Passive = no
+
+ # Connect to the remote server using TLS/SSL (Default: false)
+ ;SSLConnect = yes
+
+ # Define a (case insensitive) mask matching nick names that should be
+ # treated as IRC services when introduced via this remote server.
+ # REGULAR SERVERS DON'T NEED this parameter, so leave it empty
+ # (which is the default).
+ # When you are connecting IRC services which mask as a IRC server
+ # and which use "virtual users" to communicate with, for example
+ # "NickServ" and "ChanServ", you should set this parameter to
+ # something like "*Serv".
+ ;ServiceMask = *Serv
+
+[Server]
+ # More [Server] sections, if you like ...
+
+[Channel]
+ # Pre-defined channels can be configured in [Channel] sections.
+ # Such channels are created by the server when starting up and even
+ # persist when there are no more members left.
+ # Persistent channels are marked with the mode 'P', which can be set
+ # and unset by IRC operators like other modes on the fly.
+ # There may be more than one [Channel] block, one for each channel.
+
+ # Name of the channel
+ ;Name = #TheName
+
+ # Topic for this channel
+ ;Topic = a great topic
+
+ # Initial channel modes
+ ;Modes = tnk
+
+ # initial channel password (mode k)
+ ;Key = Secret
+
+ # Key file, syntax for each line: "<user>:<nick>:<key>".
+ # Default: none.
+ ;KeyFile = /etc/ngircd/#chan.key
+
+ # maximum users per channel (mode l)
+ ;MaxUsers = 23
+
+[Channel]
+ # More [Channel] sections, if you like ...
+
# -eof-
projects / ngircd-alex.git / blobdiff