+++ /dev/null
-#
-# This is a sample configuration file for the ngIRCd IRC daemon, which must
-# be customized to the local preferences and needs.
-#
-# Comments are started with "#" or ";".
-#
-# A lot of configuration options in this file start with a ";". You have
-# to remove the ";" in front of each variable to actually set a value!
-# The disabled variables are shown with example values for completeness only
-# and the daemon is using compiled-in default settings.
-#
-# Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the
-# server interprets the configuration file as expected!
-#
-# Please see ngircd.conf(5) for a complete list of configuration options.
-#
-
-[Global]
- # The [Global] section of this file is used to define the main
- # configuration of the server, like the server name and the ports
- # on which the server should be listening.
-
- # Server name in the IRC network, must contain at least one dot
- # (".") and be unique in the IRC network. Required!
- Name = irc.the.net
-
- # Info text of the server. This will be shown by WHOIS and
- # LINKS requests for example.
- Info = Server Info Text
-
- # Global password for all users needed to connect to the server.
- # (Default: not set)
- ;Password = abc
-
- # Password required for using the WEBIRC command used by some
- # Web-to-IRC gateways. If not set/empty, the WEBIRC command can't
- # be used. (Default: not set)
- ;WebircPassword = xyz
-
- # Information about the server and the administrator, used by the
- # ADMIN command. Not required by server but by RFC!
- ;AdminInfo1 = Description
- ;AdminInfo2 = Location
- ;AdminEMail = admin@irc.server
-
- # Ports on which the server should listen. There may be more than
- # one port, separated with ",". (Default: 6667)
- ;Ports = 6667, 6668, 6669
-
- # Additional Listen Ports that expect SSL/TLS encrypted connections
- ;SSLPorts = 6697, 9999
-
- # SSL Server Key
- ;SSLKeyFile = /usr/local/etc/ngircd/ssl/server-key.pem
-
- # password to decrypt SSLKeyFile (OpenSSL only)
- ;SSLKeyFilePassword = secret
-
- # SSL Server Key Certificate
- ;SSLCertFile = /usr/local/etc/ngircd/ssl/server-cert.pem
-
- # Diffie-Hellman parameters
- ;SSLDHFile = /usr/local/etc/ngircd/ssl/dhparams.pem
-
- # comma separated list of IP addresses on which the server should
- # listen. Default values are:
- # "0.0.0.0" or (if compiled with IPv6 support) "::,0.0.0.0"
- # so the server listens on all IP addresses of the system by default.
- ;Listen = 127.0.0.1,192.168.0.1
-
- # Syslog "facility" to which ngIRCd should send log messages.
- # Possible values are system dependant, but most probably auth, daemon,
- # user and local1 through local7 are possible values; see syslog(3).
- # Default is "local5" for historical reasons, you probably want to
- # change this to "daemon", for example.
- SyslogFacility = local1
-
- # Text file with the "message of the day" (MOTD). This message will
- # be shown to all users connecting to the server:
- ;MotdFile = /usr/local/etc/ngircd.motd
-
- # A simple Phrase (<256 chars) if you don't want to use a motd file.
- ;MotdPhrase = "Hello world!"
-
- # User ID under which the server should run; you can use the name
- # of the user or the numerical ID. ATTENTION: For this to work the
- # server must have been started with root privileges! In addition,
- # the configuration and MOTD files must be readable by this user,
- # otherwise RESTART and REHASH won't work!
- ;ServerUID = 65534
-
- # Group ID under which the ngircd should run; you can use the name
- # of the group or the numerical ID. ATTENTION: For this to work the
- # server must have been started with root privileges!
- ;ServerGID = 65534
-
- # A directory to chroot in when everything is initialized. It
- # doesn't need to be populated if ngIRCd is compiled as a static
- # binary. By default ngIRCd won't use the chroot() feature.
- # ATTENTION: For this to work the server must have been started
- # with root privileges!
- ;ChrootDir = /var/empty
-
- # This tells ngircd to write its current process id to a file.
- # Note that the pidfile is written AFTER chroot and switching uid,
- # i. e. the Directory the pidfile resides in must be writeable by
- # the ngircd user and exist in the chroot directory.
- ;PidFile = /var/run/ngircd/ngircd.pid
-
- # After <PingTimeout> seconds of inactivity the server will send a
- # PING to the peer to test whether it is alive or not.
- ;PingTimeout = 120
-
- # If a client fails to answer a PING with a PONG within <PongTimeout>
- # seconds, it will be disconnected by the server.
- ;PongTimeout = 20
-
- # The server tries every <ConnectRetry> seconds to establish a link
- # to not yet (or no longer) connected servers.
- ;ConnectRetry = 60
-
- # Should IRC Operators be allowed to use the MODE command even if
- # they are not(!) channel-operators?
- ;OperCanUseMode = no
-
- # Mask IRC Operator mode requests as if they were coming from the
- # server? (This is a compatibility hack for ircd-irc2 servers)
- ;OperServerMode = no
-
- # Are remote IRC operators allowed to control this server, e. g.
- # use commands like CONNECT, SQUIT, DIE, ...?
- ;AllowRemoteOper = no
-
- # Allow Pre-Defined Channels only (see Section [Channels])
- ;PredefChannelsOnly = no
-
- # Don't do any DNS lookups when a client connects to the server.
- ;NoDNS = no
-
- # Don't do any IDENT lookups, even if ngIRCd has been compiled
- # with support for it.
- ;NoIdent = no
-
- # Don't use PAM, even if ngIRCd has been compiled with support for it.
- ;NoPAM = no
-
- # Don't use ZeroConf service registration, even if ngIRCd has been
- # compiled with support for it (e.g. Howl, Avahi, Mac OS X).
- ;NoZeroConf = no
-
- # try to connect to other irc servers using ipv4 and ipv6, if possible
- ;ConnectIPv6 = yes
- ;ConnectIPv4 = yes
-
- # Maximum number of simultaneous in- and outbound connections the
- # server is allowed to accept (0: unlimited):
- ;MaxConnections = 0
-
- # Maximum number of simultaneous connections from a single IP address
- # the server will accept (0: unlimited):
- ;MaxConnectionsIP = 5
-
- # Maximum number of channels a user can be member of (0: no limit):
- ;MaxJoins = 10
-
- # Maximum length of an user nick name (Default: 9, as in RFC 2812).
- # Please note that all servers in an IRC network MUST use the same
- # maximum nick name length!
- ;MaxNickLength = 9
-
-[Operator]
- # [Operator] sections are used to define IRC Operators. There may be
- # more than one [Operator] block, one for each local operator.
-
- # ID of the operator (may be different of the nick name)
- ;Name = TheOper
-
- # Password of the IRC operator
- ;Password = ThePwd
-
- # Optional Mask from which /OPER will be accepted
- ;Mask = *!ident@somewhere.example.com
-
-[Operator]
- # More [Operator] sections, if you like ...
-
-[Server]
- # Other servers are configured in [Server] sections. If you
- # configure a port for the connection, then this ngircd tries to
- # connect to to the other server on the given port; if not it waits
- # for the other server to connect.
- # There may be more than one server block, one for each server.
- #
- # Server Groups:
- # The ngIRCd allows "server groups": You can assign an "ID" to every
- # server with which you want this ngIRCd to link. If a server of a
- # group won't answer, the ngIRCd tries to connect to the next server
- # in the given group. But the ngircd never tries to connect to two
- # servers with the same group ID.
-
- # IRC name of the remote server, must match the "Name" variable in
- # the [Global] section of the other server (when using ngIRCd).
- ;Name = irc2.the.net
-
- # Internet host name or IP address of the peer (only required when
- # this server should establish the connection).
- ;Host = connect-to-host.the.net
-
- # IP address to use as _source_ address for the connection. if
- # unspecified, ngircd will let the operating system pick an address.
- ;Bind = 10.0.0.1
-
- # Port of the server to which the ngIRCd should connect. If you
- # assign no port the ngIRCd waits for incoming connections.
- ;Port = 6667
-
- # Own password for the connection. This password has to be configured
- # as "PeerPassword" on the other server.
- ;MyPassword = MySecret
-
- # Foreign password for this connection. This password has to be
- # configured as "MyPassword" on the other server.
- ;PeerPassword = PeerSecret
-
- # Group of this server (optional)
- ;Group = 123
-
- # Set the "Passive" option to "yes" if you don't want this ngIRCd to
- # connect to the configured peer (same as leaving the "Port" variable
- # empty). The advantage of this option is that you can actually
- # configure a port an use the IRC command CONNECT more easily to
- # manually connect this specific server later.
- ;Passive = no
-
- # Connect to the remote server using TLS/SSL (Default: false)
- ;SSLConnect = yes
-
- # Define a (case insensitive) mask matching nick names that should be
- # treated as IRC services when introduced via this remote server.
- # REGULAR SERVERS DON'T NEED this parameter, so leave it empty
- # (which is the default).
- # When you are connecting IRC services which mask as a IRC server
- # and which use "virtual users" to communicate with, for example
- # "NickServ" and "ChanServ", you should set this parameter to
- # something like "*Serv".
- ;ServiceMask = *Serv
-
-[Server]
- # More [Server] sections, if you like ...
-
-[Channel]
- # Pre-defined channels can be configured in [Channel] sections.
- # Such channels are created by the server when starting up and even
- # persist when there are no more members left.
- # Persistent channels are marked with the mode 'P', which can be set
- # and unset by IRC operators like other modes on the fly.
- # There may be more than one [Channel] block, one for each channel.
-
- # Name of the channel
- ;Name = #TheName
-
- # Topic for this channel
- ;Topic = a great topic
-
- # Initial channel modes
- ;Modes = tnk
-
- # initial channel password (mode k)
- ;Key = Secret
-
- # Key file, syntax for each line: "<user>:<nick>:<key>".
- # Default: none.
- ;KeyFile = /etc/ngircd/#chan.key
-
- # maximum users per channel (mode l)
- ;MaxUsers = 23
-
-[Channel]
- # More [Channel] sections, if you like ...
-
-# -eof-
projects / ngircd-alex.git / blobdiff