ngIRCd - Next Generation IRC Server
+ http://ngircd.barton.de/
- (c)2001-2007 Alexander Barton,
- alex@barton.de, http://www.barton.de/
-
+ (c)2001-2011 Alexander Barton and Contributors.
ngIRCd is free software and published under the
terms of the GNU General Public License.
-- NEWS --
-ngIRCd HEAD
-
+ngIRCd
+
+ - Deprecate NoXX-Options in ngircd.conf: 'NoDNS=no' => 'DNS=yes',
+ 'NoIdent=no' => 'Ident=yes', 'NoPAM=no' => 'PAM=yes', and
+ 'NoZeroConf=no' => 'ZeroConf=yes' (and vice-versa).
+ The defaults are adjusted accordingly and the old variables are still
+ accepted, so there is no functional change.
+ - Don't throttle services and servers beeing registered.
+
+ngIRCd Release 17.1 (2010-12-19)
+
+ - Don't log critical (or worse) messages to stderr
+ - Remove "error file" when compiled with debug code enabled
+ - New numeric 329: get channel creation time on "MODE #chan" commands
+
+ngIRCd Release 17 (2010-11-07)
+
+ - doc: change path names in sample-ngircd.conf depending on sysconfdir
+
+ ngIRCd 17~rc2 (2010-10-25)
+ - Generate ngIRCd version number from GIT tag.
+ - Make sourcecode compatible with ansi2knr again. This allows to compile
+ ngIRCd using a pre-ANSI K&R C compiler again.
+
+ ngIRCd 17~rc1 (2010-10-11)
+ - New configuration option "NoZeroConf" to disable service registration at
+ runtime even if ngIRCd is compiled with support for ZeroConf (e.g. using
+ Howl, Avahi or on Mac OS X).
+ - New configuration option "SyslogFacility" to define the syslog "facility"
+ (the "target"), to which ngIRCd should send its log messages.
+ Possible values are system dependant, but most probably "auth", "daemon",
+ "user" and "local1" through "local7" are possible values; see syslog(3).
+ Default is "local5" for historical reasons.
+ - Dump the "internal server state" (configured servers, established
+ connections and known clients) to the console or syslog when receiving
+ the SIGUSR2 signal and debug mode is enabled.
+ - Enable the daemon to disable and enable "debug mode" on runtime using
+ signal SIGUSR1, when debug code is compiled in, not only on startup
+ using the command line parameters.
+ - Implement user mode "x": hostname cloaking (closes: #102).
+ - Change MOTD file handling: ngIRCd now caches the contens of the MOTD
+ file, so the daemon now requires a HUP signal or REHASH command to
+ re-read the MOTD file when its content changed.
+ - Allow IRC ops to change channel modes even without OperServerMode set.
+ - Allow IRC operators to use MODE command on any channel (closes: #100).
+ - New configuration option "NoPAM" to disable PAM.
+ - Implement asynchronous user authentication using PAM, please see the
+ file doc/PAM.txt for details.
+ - Add some documentation for using BOPM with ngIRCd, see doc/Bopm.txt.
+ - Implement user mode "c": receive connect/disconnect NOTICEs. Note that
+ this new mode requires the user to be an IRC operator.
+ - Show SSL status in WHOIS output, numeric 275.
+
+ngIRCd Release 16 (2010-05-02)
+
+ ngIRCd 16~rc2 (2010-04-25)
+ - Enhace connection statistics counters: display total number of served
+ connections on daemon shutdown and when a new client connects using
+ the new numeric RPL_STATSCONN (250).
+
+ ngIRCd 16~rc1 (2010-03-25)
+ - Implement WEBIRC command used by some Web-IRC frontends. The password
+ required to secure this command must be configured using the new
+ "WebircPassword" variable in the ngircd.conf file.
+ - Remove limit on max number of configured irc operators.
+ - A new channel mode "secure connections only" (+z) has been implemented:
+ Only clients using a SSL encrypted connection to the server are allowed
+ to join such a channel.
+ But please note three things: a) already joined clients are not checked
+ when setting this mode, b) IRC operators are always allowed to join
+ every channel, and c) remote clients using a server not supporting this
+ mode are not checked either and therefore always allowed to join.
+
+ngIRCd Release 15 (2009-11-07)
+
+ ngIRCd 15~rc1 (2009-10-15)
+ - Do not add default listening port (6667) if SSL ports were specified, so
+ ngIRCd can be configured to only accept SSL-encrypted connections now.
+ - Enable IRC operators to use the IRC command SQUIT (insted of the already
+ implemented but non-standard DISCONNECT command).
+ - New configuration option "AllowRemoteOper" (disabled by default) that
+ enables remote IRC operators to use the IRC commands SQUIT and CONNECT
+ on the local server.
+ - Enforce upper limit on maximum number of handled commands. This implements
+ a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
+ per second before a one second pause is enforced.
+
+ngIRCd Release 14.1 (2009-05-05)
+
+ - Security: fix remotely triggerable crash in SSL/TLS code.
+ - Debian: build ngircd-full-dbg package.
+ - Allow ping timeout quit messages to show the timeout value.
+
+ngIRCd Release 14 (2009-04-20)
+
+ ngIRCd 14~rc1 (2009-03-29)
+ - Allow creation of persistent modeless channels.
+ - The INFO command reports the compile time now (if available).
+ - Support individual channel keys for pre-defined channels: introduce
+ new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
+ here a file can be configured for each pre-defined channel which contains
+ individual channel keys for different users.
+ - Remove limit on maximum number of predefined channels in ngircd.conf.
+
+ngIRCd Release 13 (2008-12-25)
+
+ ngIRCd 13~rc1 (2008-11-21):
+ - New version number scheme :-)
+ - Initial support for IRC services, using a RFC1459 style interface,
+ tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
+ For this to work, ngIRCd now supports server-server links conforming
+ to RFC 1459. New ngircd.conf(5) option: ServiceMask.
+ - Support for SSL-encrypted server-server and client-server links using
+ OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
+ New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
+ SSLCertFile, SSLDHFile, and SSLConnect.
+ - Server local channels have been implemented, prefix "&", that are only
+ visible to users of the same server and are not visible in the network.
+ In addition ngIRCd creates a "special" channel &SERVER on startup and logs
+ all the messages to it that a user with mode +s receives.
+ - New make target "osxpkg" to build a Mac OS X installer package.
+ - New configuration option "NoIdent" to disable IDENT lookups even if the
+ daemon is compiled with IDENT support.
+
+ngIRCd 0.12.1 (2008-07-09)
+
+ - Add option aliases -V (for --version) and -h (for --help).
+ - Make Listen parameter a comma-separated list of addresses. This also
+ obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
+ is treated as Listen="::,0.0.0.0".
+ Note: ListenIPv4 and ListenIPv6 options are still recognized,
+ but ngircd will print a warning if they are used in the config file.
+
+ngIRCd 0.12.0 (2008-05-13)
+
+ ngIRCd 0.12.0-pre2 (2008-04-29)
+ - IPv6: Add config options to disable ipv4/ipv6 support.
+
+ ngIRCd 0.12.0-pre1 (2008-04-20)
+ - Add IPv6 support.
+ - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
+ - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
+ enhanced test suite to check these commands. (Dana Dahlstrom)
+ - IRC_WHO now supports search patterns and will test this against user
+ nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
+ (reported by Dana Dahlstrom)
+ - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
+ as if the user had sent PART commands for all channels the user is a
+ member of. (Dana Dahlstrom)
+ - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
+
+ngIRCd 0.11.0 (2008-01-15)
+
+ - Add support for /STAT u (server uptime) command.
+ - New [Server] configuration Option "Bind" allows to specify
+ the source IP address to use when connecting to remote server.
+ - New configuration option "MaxNickLength" to specify the allowed maximum
+ length of user nick names. Note: must be unique in an IRC network!
- Numeric 317: implemented "signon time" (displayed in WHOIS result).
- Added new server configuration option "Passive" for "Server" blocks to
disable automatic outgoing connections (similar to -p option to ngircd,
--
-$Id: NEWS,v 1.81 2007/10/14 14:17:32 alex Exp $
+$Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $
projects / ngircd-alex.git / blobdiff