-- ChangeLog --
+ngIRCd
+
+ - New configuration option "MaxListSize" to configure the maximum number
+ of channels returned by a LIST command. The default is 100, as before.
+ - Implement user mode "b", "block messages": when a user has set mode "b",
+ all private messages and notices to this user are blocked if they don't
+ originate from a registered user, an IRC Op, server or service. The
+ originator gets an error numeric sent back in this case,
+ ERR_NONONREG_MSG (486), which is used by UnrealIRCd, too. (Closes #144)
+ - WHOIS: Not only show RPL_WHOISHOST_MSG to local IRC operators, but show
+ it to all IRC operators in the network. And don't show it to anybody if
+ the "more privacy" configuration option is enabled. (Closes #134)
+ - Test suite: make expect scripts more verbose displaying dots for each
+ reply of the server that it is waiting for.
+ - WHOIS: Implement numeric RPL_WHOISMODES_MSG (379) and show user modes in
+ the reply of the WHOIS command for the user himself or, if MorePrivacy
+ isn't set, for request initiated by an IRC operator. (Closes #129)
+ - Implement channel mode "V" (invite disallow): If the new channel mode
+ "V" is set, the INVITE command becomes invalid and all clients get the
+ new ERR_NOINVITE_MSG (518) reply. (Closes #143)
+ - KICK-protect IRC services.
+ - Implement channel mode "Q" and user mode "q": Both modes protect users
+ from channel kicks: only IRC operators and servers can kick users having
+ mode "q" or in channels with mode "Q". (Closes #141)
+ - Debian: require "telnet" or "telnet-ssl" for building and enable
+ CHARCONV in ngircd-full[-dbg] variants.
+ - Send RPL_REHASHING (382) numeric if a REHASH command was accepted.
+ - Fix spelling and variable names in some log messages.
+ - Allow users to "cloak" their hostname only when the configuration
+ variable "CloakHostModeX" (introduced in 19.2) is set. Otherwise, only
+ IRC operators, other servers, and services are allowed to set the user
+ mode "+x": this prevents regular users from changing their hostmask to
+ the name of the IRC server itself, which confused quite a few people ;-)
+ (Closes #133)
+ - New configuration option "OperChanPAutoOp": If disabled, IRC operators
+ don't become channel operators in persistent channels when joining.
+ Enabled by default, which has been the behavior of ngIRCd up to this
+ patch. (Closes #135)
+ - Allow IRC operators to see secret (+s) channels in LIST command as long
+ as the "MorePrivacy" configuration option isn't enabled in the
+ configuration file. (Closes #136)
+ - Enhance build system: Support new (>=1.12) and old (<=1.11) GNU automake
+ versions, update checks for required and optional features, enable
+ colored test output of automake (if available), rename configure.in to
+ more modern configure.ac, include .mailmap and all build-system files in
+ distribution archives and no longer require a GIT tree to detect the
+ correct version string.
+ - Update documentation: add doc/Contributing.txt and include version
+ numbers in doc/Modes.txt.
+ - Free all listen ports on initialization: now listen ports can be
+ reconfigured on runtime using a configuration reload.
+ - Initialize SSL when needed only, and disable SSL on errors.
+ - Implement new (optional) IRC+ "CHARCONV" command to set a client
+ character set that the server translates all messages to/from UTF-8.
+ This feature requires the "libiconv" library and must be enabled using
+ the new "--with-iconv" option of the ./configure script. See
+ doc/Protocol.txt for details. (Closes #109)
+ - Allow limited punctuation in usernames, for better PAM integration.
+ - Correctly re-initialize signal handlers on RESTART commands.
+ - Show a warning on startup if the configuration file is not a full path:
+ ngIRCd is a long-running process and changes its working directory to
+ "/" to not block mounted filesystems and the like when running as daemon
+ ("not in the foreground"); therefore the path to the configuration file
+ must be relative to "/" (or the chroot() directory), which basically is
+ "not relative", to ensure that "kill -HUP" and the "REHASH" command work
+ as expected later on. (Closes #127)
+ - Make the "&SERVER" channel definable in a [Channel] configuration block,
+ which enables server operators to overwrite the built-in topic and
+ channel modes. (Closes #131)
+ - Don't limit list size of "WHO #channel" commands, because it makes no
+ sense to not return all the users in that channel, so I removed the
+ check. But if there are more than MAX_RPL_WHO(25) replies, the client
+ requesting the list will be "penalized" one second more, then 2 in
+ total. (Closes #125)
+ - Make ngIRCd buildable using the kqueue() IO interface on FreeBSD 4.x.
+ - Fix the "NoticeAuth" configuration option when using SSL connections and
+ enhance the message to show the hostname and IDENT reply of the client.
+ - Introduce numeric RPL_HOSTHIDDEN_MSG (396): This numeric is sent to the
+ client each time it changes its displayed hostname using "MODE +/-x",
+ and if "CloakHost" is set right after the MOTD has been sent.
+ - Fix USERHOST not displaying the correctly cloaked hostname.
+ - Implement user mode "B" ("Bot flag"): it is settable and unsettable by
+ every (non-restricted) client. This is how Unreal and InspIRCd do
+ behave, and so do we :-)
+ - Dynamically allocate memory for connection passwords: This a) saves
+ memory for clients not using passwords at all and b) allows for
+ "arbitrarily" long passwords.
+ - Implement channel mode "M": Only the server, identified users and IRC
+ operators are able to talk in such a channel.
+ - Block nicknames that are reserved for services and are defined using the
+ configuration variable "ServiceMask" in "Server" blocks; And this
+ variable now can handle more than one mask separated by commas.
+ - Now "make uninstall" removes the installed "ngircd.conf" file, if it is
+ still equal to our "sample-ngircd.conf" file and therefore hasn't been
+ modified by the user. If it has been modified, it isn't removed and a
+ notice is displayed to the user. And "make install" now displays a
+ message when no ngircd.conf file exists and the "sample-ngircd.conf"
+ file will be installed as a starting point.
+ - Add contrib/ngircd.service, a systemd service file for ngircd.
+ - Implemented XOP channel user modes: "Half Op" ("+h", prefix "%") can set
+ the channel modes +imntvIbek and kick all +v and normal users; "Admin"
+ ("+a", prefix "&") can set channel modes +imntvIbekoRsz and kick all +o,
+ +h, +v and normal users; and "Owner" ("+q", prefix "~") can set channel
+ modes +imntvIbekoRsz and kick all +a, +o, +h, +v and normal users.
+ - Implement hashed cloaked hostnames for both the "CloakHost" and
+ "CloakHostModeX" configuration options: now the admin can use the new
+ '%x' placeholder to insert a hashed version of the clients hostname,
+ and the new configuration option "CloakHostSalt" defines the salt for
+ the hash function. When "CloakHostSalt" is not set (the default), a
+ random salt will be generated after each server restart. (Closes #133)
+
+ngIRCd Release 19.2 (2012-06-19)
+
+ - doc/Capabilities.txt: document "multi-prefix" capability
+
+ ngIRCd 19.2~rc1 (2012-06-13)
+ - New configuration option "CloakHostModeX" to configure the hostname
+ that gets used for IRC clients which have user mode "+x" enabled.
+ Up to now, the name of the IRC server itself has been used for this,
+ which still is the default when "CloakHostModeX" isn't set.
+ - Correctly handle asynchronously re-established server links: a race
+ condition could let the daemon loose track of an already re-established
+ incoming server link while preparing its own outgoing connection.
+ Peers that both try to connect each other could have been affected.
+ - Log a debug message when SIGUSR2 is handled in debug mode.
+ - Only allow alphanumeric characters in user-supplied user names of
+ USER command and IDENT replies.
+ - Change wording of "TLS initialized" message to make it more consistent.
+ - Don't leak file descriptors on error path when creating "PID files".
+ - Add missing mode "r" to CHANMODES in 005 "ISUPPORT" numeric.
+ - Update doc/Modes.txt and doc/Platforms.txt documents.
+ - contrib/platformtest.sh: correctly detect Open64 C compiler and handle
+ "CC=xxx MAKE=yyy ./platformtest.sh" calling convention.
+ - Add instructions for setting up Atheme IRC services.
+ - Implement support for IRC capability handling, the new "CAP" command,
+ and capablity "multi-prefix" which allows both the NAME and WHO command
+ handlers to return more than one "class prefix" to the client.
+ - Update Xcode project files: reference missing documentation files.
+ - Fix: Don't ignore "permission denied" errors when enabling chroot.
+ - FAQ: enhance description of chroot setup.
+
+ngIRCd Release 19.1 (2012-03-19)
+
+ - Fix gcc warning (v4.6.3), initialize "list" variable to NULL.
+ - Fix typos: "recieved" -> "received", "Please not" -> "Please note",
+ and fix lintian(1) warning ""hyphen-used-as-minus-sign", too.
+ - Really include _all_ patches to build the Anope module into the
+ distribution archive ... ooops!
+ - getpid.sh: Fix test case error for Debian using sbuild(1).
+ - Don't log "ngIRCd hello message" two times when starting up.
+
ngIRCd Release 19 (2012-02-29)
- Update build system: bump config.guess and config.sub files used by
- Fix building ngIRCd with old gcc versions (e. g. 2.7.2).
- Correctly re-open syslog logging after reading of configuration
file: Syslog logging has been initialized before reading the
- configuraton, so ngIRCd always used the default facility and ignored
+ configuration, so ngIRCd always used the default facility and ignored
the "SyslogFacility" configuration option ...
Thanks to Patrik Schindler for reporting this issue!
- Log more information about server synchronization.
- Update preliminary ngIRCd protocol module for Anope 1.9.6, which now
is the only supported version.
- - New numeric RPL_WHOISHOST_MSG(378), which returns the DNS hostname
+ - New numeric RPL_WHOISHOST_MSG(378), which returns the DNS host name
(if available) and the IP address of a client in the WHOIS reply.
Only the user itself and local IRC operators get this numeric.
- Implement channel exception list (mode 'e'). This allows a channel
commands: this reduces the possibility of flooding channels with
commands like "PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
Problem noticed by Cahata, thanks!
- - Display correct error message when "Server{UID|GID}" variabe in the
+ - Display correct error message when "Server{UID|GID}" variable in the
configuration file is invalid (not a number and no existing user).
- Update Copyright notices for 2012 :-)
- JOIN command: don't stop handling of channel lists when a single
- ./configure: Fix logic and quoting of poll() detection code: only use
poll() when poll.h exists as well.
- Suppress 'Can't create pre-defined channel: invalid name: ""' message.
- - whois-test: handle local hostname = "localhost.localdomain" using the
- pattern "localhost*" for valid local hostnames.
+ - whois-test: handle local host name = "localhost.localdomain" using the
+ pattern "localhost*" for valid local host names.
- sample-ngircd.conf: show correct default for "PAM" variable: The
default of "PAM" is "yes" when ngIRCd has been configured to use it,
so show the correct default value in the sample configuration file.
variable description.
- Don't use "the.net" in sample-ngircd.conf, use "example.net".
- Terminate incoming connections on HTTP commands "GET" and "POST".
- - New configuration option "CloakHost": when set, this hostname is used for
- every client instead of the real DNS hostname (or IP address).
+ - New configuration option "CloakHost": when set, this host name is used for
+ every client instead of the real DNS host name (or IP address).
- New configuration option "CloakUserToNick": when enabled, ngIRCd sets
every clients' user name to their nick name and hides the user name
supplied by the IRC client.
- configure script: correctly indent IPv6 yes/no summary output.
- Don't reset My_Connections[Idx].lastping when reading data, so the
client lag debug-output is working again.
- - Implement user mode "x": hostname cloaking (closes: #102).
+ - Implement user mode "x": host name cloaking (closes: #102).
- Make configure switch "--docdir" work (closes: #108).
- Reformat and update FAQ.txt a little bit.
- INSTALL: mention SSL, IPv6, and changed handling of MotdFile.
- Allow ping timeout quit messages to show the timeout value.
- Fix error handling on compressed links.
- Fix server list announcement.
- - Do not remove hostnames from info text.
+ - Do not remove host names from info text.
ngIRCd Release 14 (2009-04-20)
- RPL_WHOREPLY messages generated by IRC_WHO didn't include flags (*,@,+).
(Dana Dahlstrom)
- IRC_WHO now supports search patterns and will test this against user
- nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
+ nickname/server name/host name, etc. as required by RFC 2812, Section 3.6.1.
(reported by Dana Dahlstrom)
- Add test cases for "WHO" command. (Dana Dahlstrom)
- Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
ngircd to crash [from HEAD]. (CVE-2008-0285)
ngIRCd 0.11.0-pre1 (2008-01-02)
- - Use dotted-decimal IP address if hostname is >= 64.
+ - Use dotted-decimal IP address if host name is >= 64.
- Add support for /STAT u (server uptime) command.
- New [Server] configuration Option "Bind" allows to specify
the source IP address to use when connecting to remote server.
original ircd exactly: the unnecessary but missing ":" before the last
parameter has been added.
- Fixed TRACE: don't output "Serv" lines for ourself; display more info.
- - Results of the resolver (hostnames and IDENT names) are discarded after
+ - Results of the resolver (host names and IDENT names) are discarded after
the client is successfully registered with the server.
- Better logging while establishing and shutting down connections.
- The type of service (TOS) of all sockets is set to "interactive" now.
projects / ngircd-alex.git / blobdiff