1 # $Id: sample-ngircd.conf,v 1.44 2008/01/07 23:02:29 alex Exp $
4 # This is a sample configuration file for the ngIRCd, which must be adepted
5 # to the local preferences and needs.
7 # Comments are started with "#" or ";".
9 # A lot of configuration options in this file start with a ";". You have
10 # to remove the ";" in front of each variable to actually set a value!
11 # The disabled variables are shown with example values for completeness.
13 # Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the
14 # server interprets the configuration file as expected!
16 # Please see ngircd.conf(5) for a complete list of configuration options.
20 # The [Global] section of this file is used to define the main
21 # configuration of the server, like the server name and the ports
22 # on which the server should be listening.
24 # Server name in the IRC network, must contain at least one dot
25 # (".") and be unique in the IRC network. Required!
28 # Info text of the server. This will be shown by WHOIS and
29 # LINKS requests for example.
30 Info = Server Info Text
32 # Global password for all users needed to connect to the server
35 # Information about the server and the administrator, used by the
36 # ADMIN command. Not required by server but by RFC!
37 ;AdminInfo1 = Description
38 ;AdminInfo2 = Location
39 ;AdminEMail = admin@irc.server
41 # Ports on which the server should listen. There may be more than
42 # one port, separated with ",". (Default: 6667)
43 ;Ports = 6667, 6668, 6669
45 # Additional Listen Ports that expect SSL/TLS encrypted connections
49 ;SSLKeyFile = /usr/local/etc/ngircd/ssl/server-key.pem
51 # password to decrypt SSLKeyFile (OpenSSL only)
52 ;SSLKeyFilePassword = secret
54 # SSL Server Key Certificate
55 ;SSLCertFile = /usr/local/etc/ngircd/ssl/server-cert.pem
57 # Diffie-Hellman parameters
58 ;SSLDHFile = /usr/local/etc/ngircd/ssl/dhparams.pem
60 # comma seperated list of IP addresses on which the server should
61 # listen. Default values are:
62 # "0.0.0.0" or (if compiled with IPv6 support) "::,0.0.0.0"
63 # so the server listens on all IP addresses of the system by default.
64 ;Listen = 127.0.0.1,192.168.0.1
66 # Text file with the "message of the day" (MOTD). This message will
67 # be shown to all users connecting to the server:
68 ;MotdFile = /usr/local/etc/ngircd.motd
70 # A simple Phrase (<256 chars) if you don't want to use a motd file.
71 # If it is set no MotdFile will be read at all.
72 ;MotdPhrase = "Hello world!"
74 # User ID under which the server should run; you can use the name
75 # of the user or the numerical ID. ATTENTION: For this to work the
76 # server must have been started with root privileges! In addition,
77 # the configuration and MOTD files must be readable by this user,
78 # otherwise RESTART and REHASH won't work!
81 # Group ID under which the ngircd should run; you can use the name
82 # of the group or the numerical ID. ATTENTION: For this to work the
83 # server must have been started with root privileges!
86 # A directory to chroot in when everything is initialized. It
87 # doesn't need to be populated if ngIRCd is compiled as a static
88 # binary. By default ngIRCd won't use the chroot() feature.
89 # ATTENTION: For this to work the server must have been started
90 # with root privileges!
91 ;ChrootDir = /var/empty
93 # This tells ngircd to write its current process id to a file.
94 # Note that the pidfile is written AFTER chroot and switching uid,
95 # i. e. the Directory the pidfile resides in must be writeable by
96 # the ngircd user and exist in the chroot directory.
97 ;PidFile = /var/run/ngircd/ngircd.pid
99 # After <PingTimeout> seconds of inactivity the server will send a
100 # PING to the peer to test whether it is alive or not.
103 # If a client fails to answer a PING with a PONG within <PongTimeout>
104 # seconds, it will be disconnected by the server.
107 # The server tries every <ConnectRetry> seconds to establish a link
108 # to not yet (or no longer) connected servers.
111 # Should IRC Operators be allowed to use the MODE command even if
112 # they are not(!) channel-operators?
115 # Mask IRC Operator mode requests as if they were coming from the
116 # server? (This is a compatibility hack for ircd-irc2 servers)
119 # Allow Pre-Defined Channels only (see Section [Channels])
120 ;PredefChannelsOnly = no
122 # Don't do any DNS lookups when a client connects to the server.
125 # Don't do any IDENT lookups, even if ngIRCd has been compiled
126 # with support for it.
129 # try to connect to other irc servers using ipv4 and ipv6, if possible
133 # Maximum number of simultaneous in- and outbound connections the
134 # server is allowed to accept (0: unlimited):
137 # Maximum number of simultaneous connections from a single IP address
138 # the server will accept (0: unlimited):
139 ;MaxConnectionsIP = 5
141 # Maximum number of channels a user can be member of (0: no limit):
144 # Maximum length of an user nick name (Default: 9, as in RFC 2812).
145 # Please note that all servers in an IRC network MUST use the same
146 # maximum nick name length!
150 # [Operator] sections are used to define IRC Operators. There may be
151 # more than one [Operator] block, one for each local operator.
153 # ID of the operator (may be different of the nick name)
156 # Password of the IRC operator
159 # Optional Mask from which /OPER will be accepted
160 ;Mask = *!ident@somewhere.example.com
163 # More [Operator] sections, if you like ...
166 # Other servers are configured in [Server] sections. If you
167 # configure a port for the connection, then this ngircd tries to
168 # connect to to the other server on the given port; if not it waits
169 # for the other server to connect.
170 # There may be more than one server block, one for each server.
173 # The ngIRCd allows "server groups": You can assign an "ID" to every
174 # server with which you want this ngIRCd to link. If a server of a
175 # group won't answer, the ngIRCd tries to connect to the next server
176 # in the given group. But the ngircd never tries to connect to two
177 # servers with the same group ID.
179 # IRC name of the remote server, must match the "Name" variable in
180 # the [Global] section of the other server (when using ngIRCd).
183 # Internet host name or IP address of the peer (only required when
184 # this server should establish the connection).
185 ;Host = connect-to-host.the.net
187 # IP address to use as _source_ address for the connection. if
188 # unspecified, ngircd will let the operating system pick an address.
191 # Port of the server to which the ngIRCd should connect. If you
192 # assign no port the ngIRCd waits for incoming connections.
195 # Own password for the connection. This password has to be configured
196 # as "PeerPassword" on the other server.
197 ;MyPassword = MySecret
199 # Foreign password for this connection. This password has to be
200 # configured as "MyPassword" on the other server.
201 ;PeerPassword = PeerSecret
203 # Group of this server (optional)
206 # Set the "Passive" option to "yes" if you don't want this ngIRCd to
207 # connect to the configured peer (same as leaving the "Port" variable
208 # empty). The advantage of this option is that you can actually
209 # configure a port an use the IRC command CONNECT more easily to
210 # manually connect this specific server later.
213 # Connect to the remote server using TLS/SSL (Default: false)
216 # Define a (case insensitive) mask matching nick names that sould be
217 # treated as IRC services when introduced via this remote server.
218 # REGULAR SERVERS DON'T NEED this parameter, so leave it empty
219 # (which is the default).
220 # When you are connecting IRC services which mask as a IRC server
221 # and which use "virtual users" to communicate with, for example
222 # "NickServ" amd "ChanServ", you should set this parameter to
223 # something like "*Serv".
227 # More [Server] sections, if you like ...
230 # Pre-defined channels can be configured in [Channel] sections.
231 # Such channels are created by the server when starting up and even
232 # persist when there are no more members left.
233 # Persistent channels are marked with the mode 'P', which can be set
234 # and unset by IRC operators like other modes on the fly.
235 # There may be more than one [Channel] block, one for each channel.
237 # Name of the channel
240 # Topic for this channel
241 ;Topic = a great topic
243 # Initial channel modes
246 # initial channel password (mode k)
249 # maximum users per channel (mode l)
253 # More [Channel] sections, if you like ...