2 ngIRCd - Next Generation IRC Server
4 (c)2001-2009 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 ngIRCd 15~rc1 (2009-10-15)
16 - Do not add default listening port (6667) if SSL ports were specified, so
17 ngIRCd can be configured to only accept SSL-encrypted connections now.
18 - Enable IRC operators to use the IRC command SQUIT (insted of the already
19 implemented but non-standard DISCONNECT command).
20 - New configuration option "AllowRemoteOper" (disabled by default) that
21 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
23 - Enforce upper limit on maximum number of handled commands. This implements
24 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
25 per second before a one second pause is enforced.
27 ngIRCd Release 14.1 (2009-05-05)
29 - Security: fix remotely triggerable crash in SSL/TLS code.
30 - Debian: build ngircd-full-dbg package.
31 - Allow ping timeout quit messages to show the timeout value.
33 ngIRCd Release 14 (2009-04-20)
35 ngIRCd 14~rc1 (2009-03-29)
36 - Allow creation of persistent modeless channels.
37 - The INFO command reports the compile time now (if available).
38 - Support individual channel keys for pre-defined channels: introduce
39 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
40 here a file can be configured for each pre-defined channel which contains
41 individual channel keys for different users.
42 - Remove limit on maximum number of predefined channels in ngircd.conf.
44 ngIRCd Release 13 (2008-12-25)
46 ngIRCd 13~rc1 (2008-11-21):
47 - New version number scheme :-)
48 - Initial support for IRC services, using a RFC1459 style interface,
49 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
50 For this to work, ngIRCd now supports server-server links conforming
51 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
52 - Support for SSL-encrypted server-server and client-server links using
53 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
54 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
55 SSLCertFile, SSLDHFile, and SSLConnect.
56 - Server local channels have been implemented, prefix "&", that are only
57 visible to users of the same server and are not visible in the network.
58 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
59 all the messages to it that a user with mode +s receives.
60 - New make target "osxpkg" to build a Mac OS X installer package.
61 - New configuration option "NoIdent" to disable IDENT lookups even if the
62 daemon is compiled with IDENT support.
64 ngIRCd 0.12.1 (2008-07-09)
66 - Add option aliases -V (for --version) and -h (for --help).
67 - Make Listen parameter a comma-separated list of addresses. This also
68 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
69 is treated as Listen="::,0.0.0.0".
70 Note: ListenIPv4 and ListenIPv6 options are still recognized,
71 but ngircd will print a warning if they are used in the config file.
73 ngIRCd 0.12.0 (2008-05-13)
75 ngIRCd 0.12.0-pre2 (2008-04-29)
76 - IPv6: Add config options to disable ipv4/ipv6 support.
78 ngIRCd 0.12.0-pre1 (2008-04-20)
80 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
81 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
82 enhanced test suite to check these commands. (Dana Dahlstrom)
83 - IRC_WHO now supports search patterns and will test this against user
84 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
85 (reported by Dana Dahlstrom)
86 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
87 as if the user had sent PART commands for all channels the user is a
88 member of. (Dana Dahlstrom)
89 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
91 ngIRCd 0.11.0 (2008-01-15)
93 - Add support for /STAT u (server uptime) command.
94 - New [Server] configuration Option "Bind" allows to specify
95 the source IP address to use when connecting to remote server.
96 - New configuration option "MaxNickLength" to specify the allowed maximum
97 length of user nick names. Note: must be unique in an IRC network!
98 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
99 - Added new server configuration option "Passive" for "Server" blocks to
100 disable automatic outgoing connections (similar to -p option to ngircd,
101 but only for the specified server). (Tassilo Schweyer)
102 - Added support for the WALLOPS command. Usage is restricted to IRC
105 ngIRCd 0.10.2 (2007-06-08)
107 - Predefined channel configuration now allows specification of channel key
108 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
109 - When using the epoll() IO interface, compile in the select() interface as
110 well and fall back to it when epoll() isn't available on runtime.
111 - Added support for IO APIs "poll()" and "/dev/poll".
113 ngIRCd 0.10.1 (2006-12-17)
115 - Allow PASS syntax defined in RFC 1459 for server links, too.
116 - New configuration option "PredefChannelsOnly": if set, clients can only
117 join predefined channels.
119 ngIRCd 0.10.0 (2006-10-01)
121 ngIRCd 0.10.0-pre1 (2006-08-02)
122 - Enhanced DIE to accept a single parameter ("comment text") which is sent
123 to all locally connected clients before the server goes down.
124 - JOIN now supports more than one channel key at a time.
125 - Implemented numeric "333": Time and user name who set a channel topic.
126 - Channel topics are no longer limited to 127 characters: now the only limit
127 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
128 limits the topic to about 490 characters due to protocol overhead).
129 - Reverse DNS lookup code now checks the result by doing an additional
130 lookup to prevent spoofing.
131 - Added new IO layer which (optionally) supports epoll() and kqueue() in
132 addition to the select() interface.
134 ngIRCd 0.9.0 (2005-07-24)
136 - Never run with root privileges but always switch the user ID.
137 - Make "netsplit" messages RFC compliant.
138 - Implemented the IRC function "WHOWAS".
139 - New configuration option "OperServerMode" to enable a workaround needed
140 when running an network with ircd2 servers and "OperCanUseMode" enabled
141 to prevent the ircd2 daemon to drop mode changes of IRC operators.
142 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
143 - Implemented support for "secret channels" (channel mode "s").
144 - New configuration option "Mask" for [Operator] sections to limit OPER
145 commands to users with a specific IRC mask. Patch from Florian Westphal.
146 - New configuration variable "PidFile", section "[Global]": if defined,
147 the server writes its process ID (PID) to this file. Default: off.
148 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
149 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
150 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
151 API will be autodetected when you call "./configure --with-rendezvous".
153 ngIRCd 0.8.0 (2004-06-26)
155 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
156 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
157 its root and working directory to something "safe". MotdPhrase is used
158 to define an "MOTD string" instead of a whole file, useful if the
159 "real" MOTD file would be outside the "jail".
160 - INVITE- and BAN-lists become synchronized between IRC+ servers when
161 establishing new connections, if the peer supports this as well.
162 - The type of service (TOS) of all sockets is set to "interactive" now.
163 - Added short command line option "-t" as alternative to "--configtest".
164 - Added optional support for "IDENT" lookups on incoming connections. You
165 have to enable this function with the ./configure switch "--with-ident".
166 The default is not to do IDENT lookups.
168 ngIRCd 0.7.5 (2003-07-11)
170 - New configuration variable "MaxConnectionsIP" to limit the number of
171 simultaneous connections from a single IP that the server will accept.
172 This configuration options lowers the risk of denial of service attacks
173 (DoS), the default is 5 connections per client IP.
174 - Added new configuration variable "Listen" to bind all listening
175 sockets of the server to a single IP address.
177 ngIRCd 0.7.1 (2003-07-18)
179 - Added support for GNU/Hurd.
181 ngIRCd 0.7.0 (2003-05-01)
183 - New command CONNECT to enable and add server links. The syntax is not
184 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
185 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
186 to add a new server (ngIRCd tries to connect new servers only once!).
187 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
188 - New command TRACE (you can trace only servers at the moment).
189 - New command HELP that lists all understood commands.
190 - ngIRCd can register itself with Rendezvous: to enable support pass the
191 new switch "--with-rendezvous" to configure.
192 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
193 configure to enable it.
194 - Changed some configure options to use "--with"/"--without" as prefix
195 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
196 "--with-tcp-wrappers", and "--with-rendezvous".
197 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
198 - Documentation is now installed in $(datadir)/doc/ngircd.
201 Older news (sorry, only available in german language):
203 ngIRCd 0.6.0, 2002-12-24
205 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
206 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
207 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
208 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
209 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
210 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
211 Der Default ist -1, "unlimitiert".
212 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
213 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
214 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
215 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
216 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
217 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
218 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
219 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
220 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
221 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
222 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
223 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
224 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
225 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
226 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
227 miteinander ueber komprimiert Links kommunizieren.
228 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
229 der Channels, in denen ein User Mitglied sein kann, begrent werden.
230 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
232 ngIRCd 0.5.0, 20.09.2002
234 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
235 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
236 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
237 dem "nativen" (ggf. pre-ANSI) Compiler.
238 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
239 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
240 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
241 wenn kein User mehr im Channel ist.
242 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
243 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
244 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
245 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
246 "AdminInfo2" und "AdminEMail".
247 - Invite- und Ban-Lists implementiert.
248 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
249 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
250 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
252 ngIRCd 0.4.2, 29.04.2002
254 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
255 Regular Expressions (bis auf "*") unterstuetzt.
257 ngIRCd 0.4.0, 01.04.2002
259 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
260 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
261 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
262 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
263 zusaetzliche Informationen.
264 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
265 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
266 nicht, so wird der naechste probiert.
267 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
268 einen Hash-Wert gesucht: sollte deutlich schneller sein.
269 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
270 gelesen und die dann verwendeten Werte angezeigt.
271 - Client-Mode "s" (Server Notices) implementiert.
272 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
273 alternative Konfigurationsdatei angegeben werden.
274 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
275 zu einer anderen User-ID und Group-ID wechseln.
277 ngIRCd 0.3.0, 02.03.2002
279 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
280 er auf den IRC-Befehl RESTART reagiert.
281 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
282 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
283 Zum Debuggen manchmal ganz praktisch :-)
284 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
285 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
286 - AWAY (und der User-Mode 'a') ist nun implementiert.
287 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
288 - Channel- und Nicknames werden nun ordentlich validiert.
290 ngIRCd 0.2.0, 15.02.2002
292 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
293 Server versteht an User-Modes o und v, beachtet letzteres allerdings
294 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
295 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
296 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
297 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
299 ngIRCd 0.1.0, 29.01.2002
301 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
302 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
303 Chatten in Channels ist aber natuerlich moeglich ;-)
304 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
305 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
306 - FAQ.txt in doc/ begonnen.
308 ngIRCd 0.0.3, 16.01.2002
310 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
311 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
312 IRC-Netzwerk arbeiten.
313 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
314 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
315 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
316 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
317 - neue Befehle: LUSERS, LINKS.
319 ngIRCd 0.0.2, 06.01.2002
321 - neuer Aufbau der Konfigurationsdatei,
322 - mehrere IRC-Operatoren koennen konfiguriert werden,
323 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
324 nur "leafed server" sein, d.h. keine "Client-Server" haben.
326 ngIRCd 0.0.1, 31.12.2001
328 - erste oeffentliche Version von ngIRCd als "public preview" :-)
332 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $