2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - New version numer scheme :-)
16 - Initial support for IRC services, using a RFC1459 styel interface,
17 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
18 For this to work, ngIRCd now supports server-server links conforming
19 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
20 - Support for SSL-encrypted server-server and client-server links using
21 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
22 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
23 SSLCertFile, SSLDHFile, and SSLConnect.
24 - Server local channels have been implemented, prefix "&", that are only
25 visible to users of the same server and are not visible in the network.
26 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
27 all the messages to it that a user with mode +s receives.
28 - New make target "osxpkg" to build a Mac OS X installer package.
30 ngIRCd 0.12.1 (2008-07-09)
32 - Add option aliases -V (for --version) and -h (for --help).
33 - Make Listen parameter a comma-seperated list of addresses. This also
34 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
35 is treated as Listen="::,0.0.0.0".
36 Note: ListenIPv4 and ListenIPv6 options are still recognized,
37 but ngircd will print a warning if they are used in the config file.
39 ngIRCd 0.12.0 (2008-05-13)
41 ngIRCd 0.12.0-pre2 (2008-04-29)
42 - IPv6: Add config options to disabe ipv4/ipv6 support.
44 ngIRCd 0.12.0-pre1 (2008-04-20)
46 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
47 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
48 enhanced test suite to check these commands. (Dana Dahlstrom)
49 - IRC_WHO now supports search patterns and will test this against user
50 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
51 (reported by Dana Dahlstrom)
52 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
53 as if the user had sent PART commands for all channels the user is a
54 member of. (Dana Dahlstrom)
55 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
57 ngIRCd 0.11.0 (2008-01-15)
59 - Add support for /STAT u (server uptime) command.
60 - New [Server] configuration Option "Bind" allows to specify
61 the source ip adress to use when connecting to remote server.
62 - New configuration option "MaxNickLength" to specify the allowed maximum
63 length of user nick names. Note: must be unique in an IRC network!
64 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
65 - Added new server configuration option "Passive" for "Server" blocks to
66 disable automatic outgoing connections (similar to -p option to ngircd,
67 but only for the specified server). (Tassilo Schweyer)
68 - Added support for the WALLOPS command. Usage is restricted to IRC
71 ngIRCd 0.10.2 (2007-06-08)
73 - Predefined channel configuration now allows specification of channel key
74 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
75 - When using the epoll() IO interface, compile in the select() interface as
76 well and fall back to it when epoll() isn't available on runtime.
77 - Added support for IO APIs "poll()" and "/dev/poll".
79 ngIRCd 0.10.1 (2006-12-17)
81 - Allow PASS syntax defined in RFC 1459 for server links, too.
82 - New configuration option "PredefChannelsOnly": if set, clients can only
83 join predefined channels.
85 ngIRCd 0.10.0 (2006-10-01)
87 ngIRCd 0.10.0-pre1 (2006-08-02)
88 - Enhanced DIE to accept a single parameter ("comment text") which is sent
89 to all locally connected clients before the server goes down.
90 - JOIN now supports more than one channel key at a time.
91 - Implemented numeric "333": Time and user name who set a channel topic.
92 - Channel topics are no longer limited to 127 characters: now the only limit
93 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
94 limits the topic to about 490 characters due to protocol overhead).
95 - Reverse DNS lookup code now checks the result by doing an additional
96 lookup to prevent spoofing.
97 - Added new IO layer which (optionally) supports epoll() and kqueue() in
98 addition to the select() interface.
100 ngIRCd 0.9.0 (2005-07-24)
102 - Never run with root privileges but always switch the user ID.
103 - Make "netsplit" messages RFC compliant.
104 - Implemented the IRC function "WHOWAS".
105 - New configuration option "OperServerMode" to enable a workaround needed
106 when running an network with ircd2 servers and "OperCanUseMode" enabled
107 to prevent the ircd2 daemon to drop mode changes of IRC operators.
108 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
109 - Implemented support for "secret channels" (channel mode "s").
110 - New configuration option "Mask" for [Operator] sections to limit OPER
111 commands to users with a specific IRC mask. Patch from Florian Westphal.
112 - New configuration variable "PidFile", section "[Global]": if defined,
113 the server writes its process ID (PID) to this file. Default: off.
114 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
115 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
116 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
117 API will be autodetected when you call "./configure --with-rendezvous".
119 ngIRCd 0.8.0 (2004-06-26)
121 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
122 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
123 its root and working directory to something "safe". MotdPhrase is used
124 to define an "MOTD string" instead of a whole file, useful if the
125 "real" MOTD file would be outside the "jail".
126 - INVITE- and BAN-lists become synchronized between IRC+ servers when
127 establishing new connections, if the peer supports this as well.
128 - The type of service (TOS) of all sockets is set to "interactive" now.
129 - Added short command line option "-t" as alternative to "--configtest".
130 - Added optional support for "IDENT" lookups on incoming connections. You
131 have to enable this function with the ./configure switch "--with-ident".
132 The default is not to do IDENT lookups.
134 ngIRCd 0.7.5 (2003-07-11)
136 - New configuration variable "MaxConnectionsIP" to limit the number of
137 simultaneous connections from a single IP that the server will accept.
138 This configuration options lowers the risk of denial of service attacks
139 (DoS), the default is 5 connections per client IP.
140 - Added new configuration variable "Listen" to bind all listening
141 sockets of the server to a single IP address.
143 ngIRCd 0.7.1 (2003-07-18)
145 - Added support for GNU/Hurd.
147 ngIRCd 0.7.0 (2003-05-01)
149 - New command CONNECT to enable and add server links. The syntax is not
150 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
151 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
152 to add a new server (ngIRCd tries to connect new servers only once!).
153 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
154 - New command TRACE (you can trace only servers at the moment).
155 - New command HELP that lists all understood commands.
156 - ngIRCd can register itself with Rendezvous: to enable support pass the
157 new switch "--with-rendezvous" to configure.
158 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
159 configure to enable it.
160 - Changed some configure options to use "--with"/"--without" as prefix
161 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
162 "--with-tcp-wrappers", and "--with-rendezvous".
163 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
164 - Documentation is now installed in $(datadir)/doc/ngircd.
167 Older news (sorry, only available in german language):
169 ngIRCd 0.6.0, 2002-12-24
171 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
172 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
173 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
174 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
175 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
176 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
177 Der Default ist -1, "unlimitiert".
178 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
179 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
180 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
181 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
182 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
183 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
184 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
185 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
186 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
187 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
188 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
189 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
190 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
191 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
192 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
193 miteinander ueber komprimiert Links kommunizieren.
194 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
195 der Channels, in denen ein User Mitglied sein kann, begrent werden.
196 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
198 ngIRCd 0.5.0, 20.09.2002
200 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
201 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
202 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
203 dem "nativen" (ggf. pre-ANSI) Compiler.
204 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
205 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
206 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
207 wenn kein User mehr im Channel ist.
208 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
209 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
210 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
211 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
212 "AdminInfo2" und "AdminEMail".
213 - Invite- und Ban-Lists implementiert.
214 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
215 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
216 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
218 ngIRCd 0.4.2, 29.04.2002
220 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
221 Regular Expressions (bis auf "*") unterstuetzt.
223 ngIRCd 0.4.0, 01.04.2002
225 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
226 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
227 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
228 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
229 zusaetzliche Informationen.
230 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
231 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
232 nicht, so wird der naechste probiert.
233 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
234 einen Hash-Wert gesucht: sollte deutlich schneller sein.
235 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
236 gelesen und die dann verwendeten Werte angezeigt.
237 - Client-Mode "s" (Server Notices) implementiert.
238 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
239 alternative Konfigurationsdatei angegeben werden.
240 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
241 zu einer anderen User-ID und Group-ID wechseln.
243 ngIRCd 0.3.0, 02.03.2002
245 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
246 er auf den IRC-Befehl RESTART reagiert.
247 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
248 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
249 Zum Debuggen manchmal ganz praktisch :-)
250 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
251 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
252 - AWAY (und der User-Mode 'a') ist nun implementiert.
253 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
254 - Channel- und Nicknames werden nun ordentlich validiert.
256 ngIRCd 0.2.0, 15.02.2002
258 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
259 Server versteht an User-Modes o und v, beachtet letzteres allerdings
260 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
261 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
262 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
263 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
265 ngIRCd 0.1.0, 29.01.2002
267 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
268 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
269 Chatten in Channels ist aber natuerlich moeglich ;-)
270 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
271 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
272 - FAQ.txt in doc/ begonnen.
274 ngIRCd 0.0.3, 16.01.2002
276 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
277 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
278 IRC-Netzwerk arbeiten.
279 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
280 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
281 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
282 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
283 - neue Befehle: LUSERS, LINKS.
285 ngIRCd 0.0.2, 06.01.2002
287 - neuer Aufbau der Konfigurationsdatei,
288 - mehrere IRC-Operatoren koennen konfiguriert werden,
289 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
290 nur "leafed server" sein, d.h. keine "Client-Server" haben.
292 ngIRCd 0.0.1, 31.12.2001
294 - erste oeffentliche Version von ngIRCd als "public preview" :-)
298 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $