2 ngIRCd - Next Generation IRC Server
4 (c)2001-2009 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Do not add default listening port (6667) if SSL ports were specified, so
16 ngIRCd can be configured to only accept SSL-encrypted connections now.
17 - Enable IRC operators to use the IRC command SQUIT (insted of the already
18 implemented but non-standard DISCONNECT command).
19 - New configuration option "AllowRemoteOper" (disabled by default) that
20 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
22 - Enforce upper limit on maximum number of handled commands. This implements
23 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
24 per second before a one second pause is enforced.
26 ngIRCd Release 14.1 (2009-05-05)
28 - Security: fix remotely triggerable crash in SSL/TLS code.
29 - Debian: build ngircd-full-dbg package.
30 - Allow ping timeout quit messages to show the timeout value.
32 ngIRCd Release 14 (2009-04-20)
34 ngIRCd 14~rc1 (2009-03-29)
35 - Allow creation of persistent modeless channels.
36 - The INFO command reports the compile time now (if available).
37 - Support individual channel keys for pre-defined channels: introduce
38 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
39 here a file can be configured for each pre-defined channel which contains
40 individual channel keys for different users.
41 - Remove limit on maximum number of predefined channels in ngircd.conf.
43 ngIRCd Release 13 (2008-12-25)
45 ngIRCd 13~rc1 (2008-11-21):
46 - New version number scheme :-)
47 - Initial support for IRC services, using a RFC1459 style interface,
48 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
49 For this to work, ngIRCd now supports server-server links conforming
50 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
51 - Support for SSL-encrypted server-server and client-server links using
52 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
53 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
54 SSLCertFile, SSLDHFile, and SSLConnect.
55 - Server local channels have been implemented, prefix "&", that are only
56 visible to users of the same server and are not visible in the network.
57 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
58 all the messages to it that a user with mode +s receives.
59 - New make target "osxpkg" to build a Mac OS X installer package.
60 - New configuration option "NoIdent" to disable IDENT lookups even if the
61 daemon is compiled with IDENT support.
63 ngIRCd 0.12.1 (2008-07-09)
65 - Add option aliases -V (for --version) and -h (for --help).
66 - Make Listen parameter a comma-separated list of addresses. This also
67 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
68 is treated as Listen="::,0.0.0.0".
69 Note: ListenIPv4 and ListenIPv6 options are still recognized,
70 but ngircd will print a warning if they are used in the config file.
72 ngIRCd 0.12.0 (2008-05-13)
74 ngIRCd 0.12.0-pre2 (2008-04-29)
75 - IPv6: Add config options to disable ipv4/ipv6 support.
77 ngIRCd 0.12.0-pre1 (2008-04-20)
79 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
80 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
81 enhanced test suite to check these commands. (Dana Dahlstrom)
82 - IRC_WHO now supports search patterns and will test this against user
83 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
84 (reported by Dana Dahlstrom)
85 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
86 as if the user had sent PART commands for all channels the user is a
87 member of. (Dana Dahlstrom)
88 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
90 ngIRCd 0.11.0 (2008-01-15)
92 - Add support for /STAT u (server uptime) command.
93 - New [Server] configuration Option "Bind" allows to specify
94 the source IP address to use when connecting to remote server.
95 - New configuration option "MaxNickLength" to specify the allowed maximum
96 length of user nick names. Note: must be unique in an IRC network!
97 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
98 - Added new server configuration option "Passive" for "Server" blocks to
99 disable automatic outgoing connections (similar to -p option to ngircd,
100 but only for the specified server). (Tassilo Schweyer)
101 - Added support for the WALLOPS command. Usage is restricted to IRC
104 ngIRCd 0.10.2 (2007-06-08)
106 - Predefined channel configuration now allows specification of channel key
107 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
108 - When using the epoll() IO interface, compile in the select() interface as
109 well and fall back to it when epoll() isn't available on runtime.
110 - Added support for IO APIs "poll()" and "/dev/poll".
112 ngIRCd 0.10.1 (2006-12-17)
114 - Allow PASS syntax defined in RFC 1459 for server links, too.
115 - New configuration option "PredefChannelsOnly": if set, clients can only
116 join predefined channels.
118 ngIRCd 0.10.0 (2006-10-01)
120 ngIRCd 0.10.0-pre1 (2006-08-02)
121 - Enhanced DIE to accept a single parameter ("comment text") which is sent
122 to all locally connected clients before the server goes down.
123 - JOIN now supports more than one channel key at a time.
124 - Implemented numeric "333": Time and user name who set a channel topic.
125 - Channel topics are no longer limited to 127 characters: now the only limit
126 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
127 limits the topic to about 490 characters due to protocol overhead).
128 - Reverse DNS lookup code now checks the result by doing an additional
129 lookup to prevent spoofing.
130 - Added new IO layer which (optionally) supports epoll() and kqueue() in
131 addition to the select() interface.
133 ngIRCd 0.9.0 (2005-07-24)
135 - Never run with root privileges but always switch the user ID.
136 - Make "netsplit" messages RFC compliant.
137 - Implemented the IRC function "WHOWAS".
138 - New configuration option "OperServerMode" to enable a workaround needed
139 when running an network with ircd2 servers and "OperCanUseMode" enabled
140 to prevent the ircd2 daemon to drop mode changes of IRC operators.
141 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
142 - Implemented support for "secret channels" (channel mode "s").
143 - New configuration option "Mask" for [Operator] sections to limit OPER
144 commands to users with a specific IRC mask. Patch from Florian Westphal.
145 - New configuration variable "PidFile", section "[Global]": if defined,
146 the server writes its process ID (PID) to this file. Default: off.
147 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
148 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
149 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
150 API will be autodetected when you call "./configure --with-rendezvous".
152 ngIRCd 0.8.0 (2004-06-26)
154 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
155 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
156 its root and working directory to something "safe". MotdPhrase is used
157 to define an "MOTD string" instead of a whole file, useful if the
158 "real" MOTD file would be outside the "jail".
159 - INVITE- and BAN-lists become synchronized between IRC+ servers when
160 establishing new connections, if the peer supports this as well.
161 - The type of service (TOS) of all sockets is set to "interactive" now.
162 - Added short command line option "-t" as alternative to "--configtest".
163 - Added optional support for "IDENT" lookups on incoming connections. You
164 have to enable this function with the ./configure switch "--with-ident".
165 The default is not to do IDENT lookups.
167 ngIRCd 0.7.5 (2003-07-11)
169 - New configuration variable "MaxConnectionsIP" to limit the number of
170 simultaneous connections from a single IP that the server will accept.
171 This configuration options lowers the risk of denial of service attacks
172 (DoS), the default is 5 connections per client IP.
173 - Added new configuration variable "Listen" to bind all listening
174 sockets of the server to a single IP address.
176 ngIRCd 0.7.1 (2003-07-18)
178 - Added support for GNU/Hurd.
180 ngIRCd 0.7.0 (2003-05-01)
182 - New command CONNECT to enable and add server links. The syntax is not
183 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
184 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
185 to add a new server (ngIRCd tries to connect new servers only once!).
186 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
187 - New command TRACE (you can trace only servers at the moment).
188 - New command HELP that lists all understood commands.
189 - ngIRCd can register itself with Rendezvous: to enable support pass the
190 new switch "--with-rendezvous" to configure.
191 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
192 configure to enable it.
193 - Changed some configure options to use "--with"/"--without" as prefix
194 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
195 "--with-tcp-wrappers", and "--with-rendezvous".
196 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
197 - Documentation is now installed in $(datadir)/doc/ngircd.
200 Older news (sorry, only available in german language):
202 ngIRCd 0.6.0, 2002-12-24
204 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
205 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
206 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
207 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
208 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
209 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
210 Der Default ist -1, "unlimitiert".
211 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
212 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
213 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
214 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
215 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
216 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
217 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
218 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
219 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
220 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
221 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
222 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
223 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
224 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
225 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
226 miteinander ueber komprimiert Links kommunizieren.
227 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
228 der Channels, in denen ein User Mitglied sein kann, begrent werden.
229 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
231 ngIRCd 0.5.0, 20.09.2002
233 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
234 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
235 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
236 dem "nativen" (ggf. pre-ANSI) Compiler.
237 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
238 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
239 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
240 wenn kein User mehr im Channel ist.
241 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
242 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
243 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
244 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
245 "AdminInfo2" und "AdminEMail".
246 - Invite- und Ban-Lists implementiert.
247 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
248 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
249 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
251 ngIRCd 0.4.2, 29.04.2002
253 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
254 Regular Expressions (bis auf "*") unterstuetzt.
256 ngIRCd 0.4.0, 01.04.2002
258 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
259 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
260 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
261 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
262 zusaetzliche Informationen.
263 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
264 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
265 nicht, so wird der naechste probiert.
266 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
267 einen Hash-Wert gesucht: sollte deutlich schneller sein.
268 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
269 gelesen und die dann verwendeten Werte angezeigt.
270 - Client-Mode "s" (Server Notices) implementiert.
271 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
272 alternative Konfigurationsdatei angegeben werden.
273 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
274 zu einer anderen User-ID und Group-ID wechseln.
276 ngIRCd 0.3.0, 02.03.2002
278 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
279 er auf den IRC-Befehl RESTART reagiert.
280 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
281 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
282 Zum Debuggen manchmal ganz praktisch :-)
283 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
284 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
285 - AWAY (und der User-Mode 'a') ist nun implementiert.
286 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
287 - Channel- und Nicknames werden nun ordentlich validiert.
289 ngIRCd 0.2.0, 15.02.2002
291 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
292 Server versteht an User-Modes o und v, beachtet letzteres allerdings
293 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
294 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
295 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
296 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
298 ngIRCd 0.1.0, 29.01.2002
300 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
301 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
302 Chatten in Channels ist aber natuerlich moeglich ;-)
303 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
304 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
305 - FAQ.txt in doc/ begonnen.
307 ngIRCd 0.0.3, 16.01.2002
309 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
310 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
311 IRC-Netzwerk arbeiten.
312 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
313 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
314 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
315 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
316 - neue Befehle: LUSERS, LINKS.
318 ngIRCd 0.0.2, 06.01.2002
320 - neuer Aufbau der Konfigurationsdatei,
321 - mehrere IRC-Operatoren koennen konfiguriert werden,
322 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
323 nur "leafed server" sein, d.h. keine "Client-Server" haben.
325 ngIRCd 0.0.1, 31.12.2001
327 - erste oeffentliche Version von ngIRCd als "public preview" :-)
331 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $