2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
16 enhanced test suite to check these commands. (Dana Dahlstrom)
17 - IRC_WHO now supports search patterns and will test this
18 against user nickname/servername/hostname, etc. as required by
19 RFC 2812, Section 3.6.1. (reported by Dana Dahlstrom)
20 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
21 as if the user had sent PART commands for all channels the user is a
22 member of. (Dana Dahlstrom)
23 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
25 ngIRCd 0.11.0 (2008-01-15)
27 - Add support for /STAT u (server uptime) command.
28 - New [Server] configuration Option "Bind" allows to specify
29 the source ip adress to use when connecting to remote server.
30 - New configuration option "MaxNickLength" to specify the allowed maximum
31 length of user nick names. Note: must be unique in an IRC network!
32 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
33 - Added new server configuration option "Passive" for "Server" blocks to
34 disable automatic outgoing connections (similar to -p option to ngircd,
35 but only for the specified server). (Tassilo Schweyer)
36 - Added support for the WALLOPS command. Usage is restricted to IRC
39 ngIRCd 0.10.2 (2007-06-08)
41 - Predefined channel configuration now allows specification of channel key
42 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
43 - When using the epoll() IO interface, compile in the select() interface as
44 well and fall back to it when epoll() isn't available on runtime.
45 - Added support for IO APIs "poll()" and "/dev/poll".
47 ngIRCd 0.10.1 (2006-12-17)
49 - Allow PASS syntax defined in RFC 1459 for server links, too.
50 - New configuration option "PredefChannelsOnly": if set, clients can only
51 join predefined channels.
53 ngIRCd 0.10.0 (2006-10-01)
55 ngIRCd 0.10.0-pre1 (2006-08-02)
56 - Enhanced DIE to accept a single parameter ("comment text") which is sent
57 to all locally connected clients before the server goes down.
58 - JOIN now supports more than one channel key at a time.
59 - Implemented numeric "333": Time and user name who set a channel topic.
60 - Channel topics are no longer limited to 127 characters: now the only limit
61 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
62 limits the topic to about 490 characters due to protocol overhead).
63 - Reverse DNS lookup code now checks the result by doing an additional
64 lookup to prevent spoofing.
65 - Added new IO layer which (optionally) supports epoll() and kqueue() in
66 addition to the select() interface.
68 ngIRCd 0.9.0 (2005-07-24)
70 - Never run with root privileges but always switch the user ID.
71 - Make "netsplit" messages RFC compliant.
72 - Implemented the IRC function "WHOWAS".
73 - New configuration option "OperServerMode" to enable a workaround needed
74 when running an network with ircd2 servers and "OperCanUseMode" enabled
75 to prevent the ircd2 daemon to drop mode changes of IRC operators.
76 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
77 - Implemented support for "secret channels" (channel mode "s").
78 - New configuration option "Mask" for [Operator] sections to limit OPER
79 commands to users with a specific IRC mask. Patch from Florian Westphal.
80 - New configuration variable "PidFile", section "[Global]": if defined,
81 the server writes its process ID (PID) to this file. Default: off.
82 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
83 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
84 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
85 API will be autodetected when you call "./configure --with-rendezvous".
87 ngIRCd 0.8.0 (2004-06-26)
89 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
90 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
91 its root and working directory to something "safe". MotdPhrase is used
92 to define an "MOTD string" instead of a whole file, useful if the
93 "real" MOTD file would be outside the "jail".
94 - INVITE- and BAN-lists become synchronized between IRC+ servers when
95 establishing new connections, if the peer supports this as well.
96 - The type of service (TOS) of all sockets is set to "interactive" now.
97 - Added short command line option "-t" as alternative to "--configtest".
98 - Added optional support for "IDENT" lookups on incoming connections. You
99 have to enable this function with the ./configure switch "--with-ident".
100 The default is not to do IDENT lookups.
102 ngIRCd 0.7.5 (2003-07-11)
104 - New configuration variable "MaxConnectionsIP" to limit the number of
105 simultaneous connections from a single IP that the server will accept.
106 This configuration options lowers the risk of denial of service attacks
107 (DoS), the default is 5 connections per client IP.
108 - Added new configuration variable "Listen" to bind all listening
109 sockets of the server to a single IP address.
111 ngIRCd 0.7.1 (2003-07-18)
113 - Added support for GNU/Hurd.
115 ngIRCd 0.7.0 (2003-05-01)
117 - New command CONNECT to enable and add server links. The syntax is not
118 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
119 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
120 to add a new server (ngIRCd tries to connect new servers only once!).
121 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
122 - New command TRACE (you can trace only servers at the moment).
123 - New command HELP that lists all understood commands.
124 - ngIRCd can register itself with Rendezvous: to enable support pass the
125 new switch "--with-rendezvous" to configure.
126 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
127 configure to enable it.
128 - Changed some configure options to use "--with"/"--without" as prefix
129 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
130 "--with-tcp-wrappers", and "--with-rendezvous".
131 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
132 - Documentation is now installed in $(datadir)/doc/ngircd.
135 Older news (sorry, only available in german language):
137 ngIRCd 0.6.0, 2002-12-24
139 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
140 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
141 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
142 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
143 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
144 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
145 Der Default ist -1, "unlimitiert".
146 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
147 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
148 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
149 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
150 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
151 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
152 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
153 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
154 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
155 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
156 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
157 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
158 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
159 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
160 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
161 miteinander ueber komprimiert Links kommunizieren.
162 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
163 der Channels, in denen ein User Mitglied sein kann, begrent werden.
164 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
166 ngIRCd 0.5.0, 20.09.2002
168 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
169 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
170 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
171 dem "nativen" (ggf. pre-ANSI) Compiler.
172 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
173 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
174 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
175 wenn kein User mehr im Channel ist.
176 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
177 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
178 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
179 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
180 "AdminInfo2" und "AdminEMail".
181 - Invite- und Ban-Lists implementiert.
182 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
183 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
184 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
186 ngIRCd 0.4.2, 29.04.2002
188 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
189 Regular Expressions (bis auf "*") unterstuetzt.
191 ngIRCd 0.4.0, 01.04.2002
193 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
194 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
195 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
196 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
197 zusaetzliche Informationen.
198 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
199 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
200 nicht, so wird der naechste probiert.
201 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
202 einen Hash-Wert gesucht: sollte deutlich schneller sein.
203 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
204 gelesen und die dann verwendeten Werte angezeigt.
205 - Client-Mode "s" (Server Notices) implementiert.
206 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
207 alternative Konfigurationsdatei angegeben werden.
208 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
209 zu einer anderen User-ID und Group-ID wechseln.
211 ngIRCd 0.3.0, 02.03.2002
213 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
214 er auf den IRC-Befehl RESTART reagiert.
215 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
216 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
217 Zum Debuggen manchmal ganz praktisch :-)
218 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
219 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
220 - AWAY (und der User-Mode 'a') ist nun implementiert.
221 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
222 - Channel- und Nicknames werden nun ordentlich validiert.
224 ngIRCd 0.2.0, 15.02.2002
226 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
227 Server versteht an User-Modes o und v, beachtet letzteres allerdings
228 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
229 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
230 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
231 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
233 ngIRCd 0.1.0, 29.01.2002
235 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
236 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
237 Chatten in Channels ist aber natuerlich moeglich ;-)
238 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
239 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
240 - FAQ.txt in doc/ begonnen.
242 ngIRCd 0.0.3, 16.01.2002
244 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
245 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
246 IRC-Netzwerk arbeiten.
247 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
248 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
249 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
250 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
251 - neue Befehle: LUSERS, LINKS.
253 ngIRCd 0.0.2, 06.01.2002
255 - neuer Aufbau der Konfigurationsdatei,
256 - mehrere IRC-Operatoren koennen konfiguriert werden,
257 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
258 nur "leafed server" sein, d.h. keine "Client-Server" haben.
260 ngIRCd 0.0.1, 31.12.2001
262 - erste oeffentliche Version von ngIRCd als "public preview" :-)
266 $Id: NEWS,v 1.87 2008/02/17 13:26:41 alex Exp $