2 ngIRCd - Next Generation IRC Server
4 (c)2001-2008 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
14 - IRC_WHO now supports search patterns and will test this
15 against user nickname/servername/hostname, etc. as required by
16 RFC 2812, Section 3.6.1.
17 - implement RFC 2812 handling of "0" argument to 'JOIN':
18 must be treated as if the user had sent PART commands
19 for all channels the user is a member of. (Dana Dahlstrom)
20 - allow NOTICEs to be sent to a channel. (Fabian Schlager)
22 ngIRCd 0.11.0 (2008-01-15)
24 - Add support for /STAT u (server uptime) command.
25 - New [Server] configuration Option "Bind" allows to specify
26 the source ip adress to use when connecting to remote server.
27 - New configuration option "MaxNickLength" to specify the allowed maximum
28 length of user nick names. Note: must be unique in an IRC network!
29 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
30 - Added new server configuration option "Passive" for "Server" blocks to
31 disable automatic outgoing connections (similar to -p option to ngircd,
32 but only for the specified server). (Tassilo Schweyer)
33 - Added support for the WALLOPS command. Usage is restricted to IRC
36 ngIRCd 0.10.2 (2007-06-08)
38 - Predefined channel configuration now allows specification of channel key
39 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
40 - When using the epoll() IO interface, compile in the select() interface as
41 well and fall back to it when epoll() isn't available on runtime.
42 - Added support for IO APIs "poll()" and "/dev/poll".
44 ngIRCd 0.10.1 (2006-12-17)
46 - Allow PASS syntax defined in RFC 1459 for server links, too.
47 - New configuration option "PredefChannelsOnly": if set, clients can only
48 join predefined channels.
50 ngIRCd 0.10.0 (2006-10-01)
52 ngIRCd 0.10.0-pre1 (2006-08-02)
53 - Enhanced DIE to accept a single parameter ("comment text") which is sent
54 to all locally connected clients before the server goes down.
55 - JOIN now supports more than one channel key at a time.
56 - Implemented numeric "333": Time and user name who set a channel topic.
57 - Channel topics are no longer limited to 127 characters: now the only limit
58 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
59 limits the topic to about 490 characters due to protocol overhead).
60 - Reverse DNS lookup code now checks the result by doing an additional
61 lookup to prevent spoofing.
62 - Added new IO layer which (optionally) supports epoll() and kqueue() in
63 addition to the select() interface.
65 ngIRCd 0.9.0 (2005-07-24)
67 - Never run with root privileges but always switch the user ID.
68 - Make "netsplit" messages RFC compliant.
69 - Implemented the IRC function "WHOWAS".
70 - New configuration option "OperServerMode" to enable a workaround needed
71 when running an network with ircd2 servers and "OperCanUseMode" enabled
72 to prevent the ircd2 daemon to drop mode changes of IRC operators.
73 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
74 - Implemented support for "secret channels" (channel mode "s").
75 - New configuration option "Mask" for [Operator] sections to limit OPER
76 commands to users with a specific IRC mask. Patch from Florian Westphal.
77 - New configuration variable "PidFile", section "[Global]": if defined,
78 the server writes its process ID (PID) to this file. Default: off.
79 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
80 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
81 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
82 API will be autodetected when you call "./configure --with-rendezvous".
84 ngIRCd 0.8.0 (2004-06-26)
86 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
87 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
88 its root and working directory to something "safe". MotdPhrase is used
89 to define an "MOTD string" instead of a whole file, useful if the
90 "real" MOTD file would be outside the "jail".
91 - INVITE- and BAN-lists become synchronized between IRC+ servers when
92 establishing new connections, if the peer supports this as well.
93 - The type of service (TOS) of all sockets is set to "interactive" now.
94 - Added short command line option "-t" as alternative to "--configtest".
95 - Added optional support for "IDENT" lookups on incoming connections. You
96 have to enable this function with the ./configure switch "--with-ident".
97 The default is not to do IDENT lookups.
99 ngIRCd 0.7.5 (2003-07-11)
101 - New configuration variable "MaxConnectionsIP" to limit the number of
102 simultaneous connections from a single IP that the server will accept.
103 This configuration options lowers the risk of denial of service attacks
104 (DoS), the default is 5 connections per client IP.
105 - Added new configuration variable "Listen" to bind all listening
106 sockets of the server to a single IP address.
108 ngIRCd 0.7.1 (2003-07-18)
110 - Added support for GNU/Hurd.
112 ngIRCd 0.7.0 (2003-05-01)
114 - New command CONNECT to enable and add server links. The syntax is not
115 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
116 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
117 to add a new server (ngIRCd tries to connect new servers only once!).
118 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
119 - New command TRACE (you can trace only servers at the moment).
120 - New command HELP that lists all understood commands.
121 - ngIRCd can register itself with Rendezvous: to enable support pass the
122 new switch "--with-rendezvous" to configure.
123 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
124 configure to enable it.
125 - Changed some configure options to use "--with"/"--without" as prefix
126 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
127 "--with-tcp-wrappers", and "--with-rendezvous".
128 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
129 - Documentation is now installed in $(datadir)/doc/ngircd.
132 Older news (sorry, only available in german language):
134 ngIRCd 0.6.0, 2002-12-24
136 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
137 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
138 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
139 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
140 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
141 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
142 Der Default ist -1, "unlimitiert".
143 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
144 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
145 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
146 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
147 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
148 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
149 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
150 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
151 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
152 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
153 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
154 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
155 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
156 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
157 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
158 miteinander ueber komprimiert Links kommunizieren.
159 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
160 der Channels, in denen ein User Mitglied sein kann, begrent werden.
161 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
163 ngIRCd 0.5.0, 20.09.2002
165 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
166 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
167 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
168 dem "nativen" (ggf. pre-ANSI) Compiler.
169 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
170 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
171 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
172 wenn kein User mehr im Channel ist.
173 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
174 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
175 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
176 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
177 "AdminInfo2" und "AdminEMail".
178 - Invite- und Ban-Lists implementiert.
179 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
180 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
181 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
183 ngIRCd 0.4.2, 29.04.2002
185 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
186 Regular Expressions (bis auf "*") unterstuetzt.
188 ngIRCd 0.4.0, 01.04.2002
190 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
191 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
192 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
193 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
194 zusaetzliche Informationen.
195 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
196 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
197 nicht, so wird der naechste probiert.
198 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
199 einen Hash-Wert gesucht: sollte deutlich schneller sein.
200 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
201 gelesen und die dann verwendeten Werte angezeigt.
202 - Client-Mode "s" (Server Notices) implementiert.
203 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
204 alternative Konfigurationsdatei angegeben werden.
205 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
206 zu einer anderen User-ID und Group-ID wechseln.
208 ngIRCd 0.3.0, 02.03.2002
210 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
211 er auf den IRC-Befehl RESTART reagiert.
212 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
213 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
214 Zum Debuggen manchmal ganz praktisch :-)
215 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
216 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
217 - AWAY (und der User-Mode 'a') ist nun implementiert.
218 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
219 - Channel- und Nicknames werden nun ordentlich validiert.
221 ngIRCd 0.2.0, 15.02.2002
223 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
224 Server versteht an User-Modes o und v, beachtet letzteres allerdings
225 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
226 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
227 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
228 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
230 ngIRCd 0.1.0, 29.01.2002
232 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
233 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
234 Chatten in Channels ist aber natuerlich moeglich ;-)
235 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
236 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
237 - FAQ.txt in doc/ begonnen.
239 ngIRCd 0.0.3, 16.01.2002
241 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
242 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
243 IRC-Netzwerk arbeiten.
244 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
245 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
246 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
247 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
248 - neue Befehle: LUSERS, LINKS.
250 ngIRCd 0.0.2, 06.01.2002
252 - neuer Aufbau der Konfigurationsdatei,
253 - mehrere IRC-Operatoren koennen konfiguriert werden,
254 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
255 nur "leafed server" sein, d.h. keine "Client-Server" haben.
257 ngIRCd 0.0.1, 31.12.2001
259 - erste oeffentliche Version von ngIRCd als "public preview" :-)
263 $Id: NEWS,v 1.86 2008/02/11 11:06:33 fw Exp $