2 ngIRCd - Next Generation IRC Server
4 (c)2001-2009 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Support individual channel keys for pre-defined channels: introduce
16 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
17 here a file can be configured for each pre-defined channel which contains
18 individual channel keys for different users.
19 - Remove limit on maximum number of predefined channels in ngircd.conf.
20 - Implement pre-defined server local channels ("&") and write some
21 server-specific messages to &SERVER.
23 ngIRCd Release 13 (2008-12-25)
25 ngIRCd 13~rc1 (2008-11-21):
26 - New version number scheme :-)
27 - Initial support for IRC services, using a RFC1459 style interface,
28 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
29 For this to work, ngIRCd now supports server-server links conforming
30 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
31 - Support for SSL-encrypted server-server and client-server links using
32 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
33 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
34 SSLCertFile, SSLDHFile, and SSLConnect.
35 - Server local channels have been implemented, prefix "&", that are only
36 visible to users of the same server and are not visible in the network.
37 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
38 all the messages to it that a user with mode +s receives.
39 - New make target "osxpkg" to build a Mac OS X installer package.
40 - New configuration option "NoIdent" to disable IDENT lookups even if the
41 daemon is compiled with IDENT support.
43 ngIRCd 0.12.1 (2008-07-09)
45 - Add option aliases -V (for --version) and -h (for --help).
46 - Make Listen parameter a comma-separated list of addresses. This also
47 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
48 is treated as Listen="::,0.0.0.0".
49 Note: ListenIPv4 and ListenIPv6 options are still recognized,
50 but ngircd will print a warning if they are used in the config file.
52 ngIRCd 0.12.0 (2008-05-13)
54 ngIRCd 0.12.0-pre2 (2008-04-29)
55 - IPv6: Add config options to disable ipv4/ipv6 support.
57 ngIRCd 0.12.0-pre1 (2008-04-20)
59 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
60 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
61 enhanced test suite to check these commands. (Dana Dahlstrom)
62 - IRC_WHO now supports search patterns and will test this against user
63 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
64 (reported by Dana Dahlstrom)
65 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
66 as if the user had sent PART commands for all channels the user is a
67 member of. (Dana Dahlstrom)
68 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
70 ngIRCd 0.11.0 (2008-01-15)
72 - Add support for /STAT u (server uptime) command.
73 - New [Server] configuration Option "Bind" allows to specify
74 the source IP address to use when connecting to remote server.
75 - New configuration option "MaxNickLength" to specify the allowed maximum
76 length of user nick names. Note: must be unique in an IRC network!
77 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
78 - Added new server configuration option "Passive" for "Server" blocks to
79 disable automatic outgoing connections (similar to -p option to ngircd,
80 but only for the specified server). (Tassilo Schweyer)
81 - Added support for the WALLOPS command. Usage is restricted to IRC
84 ngIRCd 0.10.2 (2007-06-08)
86 - Predefined channel configuration now allows specification of channel key
87 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
88 - When using the epoll() IO interface, compile in the select() interface as
89 well and fall back to it when epoll() isn't available on runtime.
90 - Added support for IO APIs "poll()" and "/dev/poll".
92 ngIRCd 0.10.1 (2006-12-17)
94 - Allow PASS syntax defined in RFC 1459 for server links, too.
95 - New configuration option "PredefChannelsOnly": if set, clients can only
96 join predefined channels.
98 ngIRCd 0.10.0 (2006-10-01)
100 ngIRCd 0.10.0-pre1 (2006-08-02)
101 - Enhanced DIE to accept a single parameter ("comment text") which is sent
102 to all locally connected clients before the server goes down.
103 - JOIN now supports more than one channel key at a time.
104 - Implemented numeric "333": Time and user name who set a channel topic.
105 - Channel topics are no longer limited to 127 characters: now the only limit
106 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
107 limits the topic to about 490 characters due to protocol overhead).
108 - Reverse DNS lookup code now checks the result by doing an additional
109 lookup to prevent spoofing.
110 - Added new IO layer which (optionally) supports epoll() and kqueue() in
111 addition to the select() interface.
113 ngIRCd 0.9.0 (2005-07-24)
115 - Never run with root privileges but always switch the user ID.
116 - Make "netsplit" messages RFC compliant.
117 - Implemented the IRC function "WHOWAS".
118 - New configuration option "OperServerMode" to enable a workaround needed
119 when running an network with ircd2 servers and "OperCanUseMode" enabled
120 to prevent the ircd2 daemon to drop mode changes of IRC operators.
121 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
122 - Implemented support for "secret channels" (channel mode "s").
123 - New configuration option "Mask" for [Operator] sections to limit OPER
124 commands to users with a specific IRC mask. Patch from Florian Westphal.
125 - New configuration variable "PidFile", section "[Global]": if defined,
126 the server writes its process ID (PID) to this file. Default: off.
127 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
128 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
129 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
130 API will be autodetected when you call "./configure --with-rendezvous".
132 ngIRCd 0.8.0 (2004-06-26)
134 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
135 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
136 its root and working directory to something "safe". MotdPhrase is used
137 to define an "MOTD string" instead of a whole file, useful if the
138 "real" MOTD file would be outside the "jail".
139 - INVITE- and BAN-lists become synchronized between IRC+ servers when
140 establishing new connections, if the peer supports this as well.
141 - The type of service (TOS) of all sockets is set to "interactive" now.
142 - Added short command line option "-t" as alternative to "--configtest".
143 - Added optional support for "IDENT" lookups on incoming connections. You
144 have to enable this function with the ./configure switch "--with-ident".
145 The default is not to do IDENT lookups.
147 ngIRCd 0.7.5 (2003-07-11)
149 - New configuration variable "MaxConnectionsIP" to limit the number of
150 simultaneous connections from a single IP that the server will accept.
151 This configuration options lowers the risk of denial of service attacks
152 (DoS), the default is 5 connections per client IP.
153 - Added new configuration variable "Listen" to bind all listening
154 sockets of the server to a single IP address.
156 ngIRCd 0.7.1 (2003-07-18)
158 - Added support for GNU/Hurd.
160 ngIRCd 0.7.0 (2003-05-01)
162 - New command CONNECT to enable and add server links. The syntax is not
163 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
164 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
165 to add a new server (ngIRCd tries to connect new servers only once!).
166 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
167 - New command TRACE (you can trace only servers at the moment).
168 - New command HELP that lists all understood commands.
169 - ngIRCd can register itself with Rendezvous: to enable support pass the
170 new switch "--with-rendezvous" to configure.
171 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
172 configure to enable it.
173 - Changed some configure options to use "--with"/"--without" as prefix
174 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
175 "--with-tcp-wrappers", and "--with-rendezvous".
176 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
177 - Documentation is now installed in $(datadir)/doc/ngircd.
180 Older news (sorry, only available in german language):
182 ngIRCd 0.6.0, 2002-12-24
184 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
185 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
186 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
187 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
188 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
189 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
190 Der Default ist -1, "unlimitiert".
191 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
192 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
193 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
194 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
195 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
196 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
197 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
198 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
199 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
200 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
201 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
202 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
203 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
204 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
205 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
206 miteinander ueber komprimiert Links kommunizieren.
207 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
208 der Channels, in denen ein User Mitglied sein kann, begrent werden.
209 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
211 ngIRCd 0.5.0, 20.09.2002
213 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
214 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
215 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
216 dem "nativen" (ggf. pre-ANSI) Compiler.
217 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
218 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
219 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
220 wenn kein User mehr im Channel ist.
221 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
222 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
223 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
224 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
225 "AdminInfo2" und "AdminEMail".
226 - Invite- und Ban-Lists implementiert.
227 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
228 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
229 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
231 ngIRCd 0.4.2, 29.04.2002
233 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
234 Regular Expressions (bis auf "*") unterstuetzt.
236 ngIRCd 0.4.0, 01.04.2002
238 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
239 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
240 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
241 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
242 zusaetzliche Informationen.
243 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
244 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
245 nicht, so wird der naechste probiert.
246 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
247 einen Hash-Wert gesucht: sollte deutlich schneller sein.
248 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
249 gelesen und die dann verwendeten Werte angezeigt.
250 - Client-Mode "s" (Server Notices) implementiert.
251 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
252 alternative Konfigurationsdatei angegeben werden.
253 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
254 zu einer anderen User-ID und Group-ID wechseln.
256 ngIRCd 0.3.0, 02.03.2002
258 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
259 er auf den IRC-Befehl RESTART reagiert.
260 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
261 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
262 Zum Debuggen manchmal ganz praktisch :-)
263 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
264 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
265 - AWAY (und der User-Mode 'a') ist nun implementiert.
266 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
267 - Channel- und Nicknames werden nun ordentlich validiert.
269 ngIRCd 0.2.0, 15.02.2002
271 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
272 Server versteht an User-Modes o und v, beachtet letzteres allerdings
273 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
274 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
275 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
276 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
278 ngIRCd 0.1.0, 29.01.2002
280 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
281 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
282 Chatten in Channels ist aber natuerlich moeglich ;-)
283 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
284 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
285 - FAQ.txt in doc/ begonnen.
287 ngIRCd 0.0.3, 16.01.2002
289 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
290 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
291 IRC-Netzwerk arbeiten.
292 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
293 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
294 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
295 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
296 - neue Befehle: LUSERS, LINKS.
298 ngIRCd 0.0.2, 06.01.2002
300 - neuer Aufbau der Konfigurationsdatei,
301 - mehrere IRC-Operatoren koennen konfiguriert werden,
302 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
303 nur "leafed server" sein, d.h. keine "Client-Server" haben.
305 ngIRCd 0.0.1, 31.12.2001
307 - erste oeffentliche Version von ngIRCd als "public preview" :-)
311 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $