2 ngIRCd - Next Generation IRC Server
4 (c)2001-2009 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Allow creation of persistent modeless channels.
16 - The INFO command reports the compile time now (if available).
17 - Support individual channel keys for pre-defined channels: introduce
18 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
19 here a file can be configured for each pre-defined channel which contains
20 individual channel keys for different users.
21 - Remove limit on maximum number of predefined channels in ngircd.conf.
22 - Implement pre-defined server local channels ("&") and write some
23 server-specific messages to &SERVER.
25 ngIRCd Release 13 (2008-12-25)
27 ngIRCd 13~rc1 (2008-11-21):
28 - New version number scheme :-)
29 - Initial support for IRC services, using a RFC1459 style interface,
30 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
31 For this to work, ngIRCd now supports server-server links conforming
32 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
33 - Support for SSL-encrypted server-server and client-server links using
34 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
35 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
36 SSLCertFile, SSLDHFile, and SSLConnect.
37 - Server local channels have been implemented, prefix "&", that are only
38 visible to users of the same server and are not visible in the network.
39 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
40 all the messages to it that a user with mode +s receives.
41 - New make target "osxpkg" to build a Mac OS X installer package.
42 - New configuration option "NoIdent" to disable IDENT lookups even if the
43 daemon is compiled with IDENT support.
45 ngIRCd 0.12.1 (2008-07-09)
47 - Add option aliases -V (for --version) and -h (for --help).
48 - Make Listen parameter a comma-separated list of addresses. This also
49 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
50 is treated as Listen="::,0.0.0.0".
51 Note: ListenIPv4 and ListenIPv6 options are still recognized,
52 but ngircd will print a warning if they are used in the config file.
54 ngIRCd 0.12.0 (2008-05-13)
56 ngIRCd 0.12.0-pre2 (2008-04-29)
57 - IPv6: Add config options to disable ipv4/ipv6 support.
59 ngIRCd 0.12.0-pre1 (2008-04-20)
61 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
62 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
63 enhanced test suite to check these commands. (Dana Dahlstrom)
64 - IRC_WHO now supports search patterns and will test this against user
65 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
66 (reported by Dana Dahlstrom)
67 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
68 as if the user had sent PART commands for all channels the user is a
69 member of. (Dana Dahlstrom)
70 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
72 ngIRCd 0.11.0 (2008-01-15)
74 - Add support for /STAT u (server uptime) command.
75 - New [Server] configuration Option "Bind" allows to specify
76 the source IP address to use when connecting to remote server.
77 - New configuration option "MaxNickLength" to specify the allowed maximum
78 length of user nick names. Note: must be unique in an IRC network!
79 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
80 - Added new server configuration option "Passive" for "Server" blocks to
81 disable automatic outgoing connections (similar to -p option to ngircd,
82 but only for the specified server). (Tassilo Schweyer)
83 - Added support for the WALLOPS command. Usage is restricted to IRC
86 ngIRCd 0.10.2 (2007-06-08)
88 - Predefined channel configuration now allows specification of channel key
89 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
90 - When using the epoll() IO interface, compile in the select() interface as
91 well and fall back to it when epoll() isn't available on runtime.
92 - Added support for IO APIs "poll()" and "/dev/poll".
94 ngIRCd 0.10.1 (2006-12-17)
96 - Allow PASS syntax defined in RFC 1459 for server links, too.
97 - New configuration option "PredefChannelsOnly": if set, clients can only
98 join predefined channels.
100 ngIRCd 0.10.0 (2006-10-01)
102 ngIRCd 0.10.0-pre1 (2006-08-02)
103 - Enhanced DIE to accept a single parameter ("comment text") which is sent
104 to all locally connected clients before the server goes down.
105 - JOIN now supports more than one channel key at a time.
106 - Implemented numeric "333": Time and user name who set a channel topic.
107 - Channel topics are no longer limited to 127 characters: now the only limit
108 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
109 limits the topic to about 490 characters due to protocol overhead).
110 - Reverse DNS lookup code now checks the result by doing an additional
111 lookup to prevent spoofing.
112 - Added new IO layer which (optionally) supports epoll() and kqueue() in
113 addition to the select() interface.
115 ngIRCd 0.9.0 (2005-07-24)
117 - Never run with root privileges but always switch the user ID.
118 - Make "netsplit" messages RFC compliant.
119 - Implemented the IRC function "WHOWAS".
120 - New configuration option "OperServerMode" to enable a workaround needed
121 when running an network with ircd2 servers and "OperCanUseMode" enabled
122 to prevent the ircd2 daemon to drop mode changes of IRC operators.
123 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
124 - Implemented support for "secret channels" (channel mode "s").
125 - New configuration option "Mask" for [Operator] sections to limit OPER
126 commands to users with a specific IRC mask. Patch from Florian Westphal.
127 - New configuration variable "PidFile", section "[Global]": if defined,
128 the server writes its process ID (PID) to this file. Default: off.
129 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
130 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
131 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
132 API will be autodetected when you call "./configure --with-rendezvous".
134 ngIRCd 0.8.0 (2004-06-26)
136 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
137 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
138 its root and working directory to something "safe". MotdPhrase is used
139 to define an "MOTD string" instead of a whole file, useful if the
140 "real" MOTD file would be outside the "jail".
141 - INVITE- and BAN-lists become synchronized between IRC+ servers when
142 establishing new connections, if the peer supports this as well.
143 - The type of service (TOS) of all sockets is set to "interactive" now.
144 - Added short command line option "-t" as alternative to "--configtest".
145 - Added optional support for "IDENT" lookups on incoming connections. You
146 have to enable this function with the ./configure switch "--with-ident".
147 The default is not to do IDENT lookups.
149 ngIRCd 0.7.5 (2003-07-11)
151 - New configuration variable "MaxConnectionsIP" to limit the number of
152 simultaneous connections from a single IP that the server will accept.
153 This configuration options lowers the risk of denial of service attacks
154 (DoS), the default is 5 connections per client IP.
155 - Added new configuration variable "Listen" to bind all listening
156 sockets of the server to a single IP address.
158 ngIRCd 0.7.1 (2003-07-18)
160 - Added support for GNU/Hurd.
162 ngIRCd 0.7.0 (2003-05-01)
164 - New command CONNECT to enable and add server links. The syntax is not
165 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
166 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
167 to add a new server (ngIRCd tries to connect new servers only once!).
168 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
169 - New command TRACE (you can trace only servers at the moment).
170 - New command HELP that lists all understood commands.
171 - ngIRCd can register itself with Rendezvous: to enable support pass the
172 new switch "--with-rendezvous" to configure.
173 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
174 configure to enable it.
175 - Changed some configure options to use "--with"/"--without" as prefix
176 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
177 "--with-tcp-wrappers", and "--with-rendezvous".
178 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
179 - Documentation is now installed in $(datadir)/doc/ngircd.
182 Older news (sorry, only available in german language):
184 ngIRCd 0.6.0, 2002-12-24
186 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
187 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
188 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
189 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
190 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
191 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
192 Der Default ist -1, "unlimitiert".
193 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
194 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
195 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
196 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
197 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
198 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
199 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
200 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
201 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
202 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
203 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
204 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
205 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
206 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
207 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
208 miteinander ueber komprimiert Links kommunizieren.
209 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
210 der Channels, in denen ein User Mitglied sein kann, begrent werden.
211 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
213 ngIRCd 0.5.0, 20.09.2002
215 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
216 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
217 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
218 dem "nativen" (ggf. pre-ANSI) Compiler.
219 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
220 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
221 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
222 wenn kein User mehr im Channel ist.
223 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
224 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
225 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
226 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
227 "AdminInfo2" und "AdminEMail".
228 - Invite- und Ban-Lists implementiert.
229 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
230 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
231 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
233 ngIRCd 0.4.2, 29.04.2002
235 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
236 Regular Expressions (bis auf "*") unterstuetzt.
238 ngIRCd 0.4.0, 01.04.2002
240 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
241 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
242 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
243 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
244 zusaetzliche Informationen.
245 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
246 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
247 nicht, so wird der naechste probiert.
248 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
249 einen Hash-Wert gesucht: sollte deutlich schneller sein.
250 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
251 gelesen und die dann verwendeten Werte angezeigt.
252 - Client-Mode "s" (Server Notices) implementiert.
253 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
254 alternative Konfigurationsdatei angegeben werden.
255 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
256 zu einer anderen User-ID und Group-ID wechseln.
258 ngIRCd 0.3.0, 02.03.2002
260 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
261 er auf den IRC-Befehl RESTART reagiert.
262 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
263 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
264 Zum Debuggen manchmal ganz praktisch :-)
265 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
266 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
267 - AWAY (und der User-Mode 'a') ist nun implementiert.
268 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
269 - Channel- und Nicknames werden nun ordentlich validiert.
271 ngIRCd 0.2.0, 15.02.2002
273 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
274 Server versteht an User-Modes o und v, beachtet letzteres allerdings
275 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
276 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
277 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
278 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
280 ngIRCd 0.1.0, 29.01.2002
282 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
283 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
284 Chatten in Channels ist aber natuerlich moeglich ;-)
285 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
286 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
287 - FAQ.txt in doc/ begonnen.
289 ngIRCd 0.0.3, 16.01.2002
291 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
292 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
293 IRC-Netzwerk arbeiten.
294 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
295 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
296 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
297 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
298 - neue Befehle: LUSERS, LINKS.
300 ngIRCd 0.0.2, 06.01.2002
302 - neuer Aufbau der Konfigurationsdatei,
303 - mehrere IRC-Operatoren koennen konfiguriert werden,
304 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
305 nur "leafed server" sein, d.h. keine "Client-Server" haben.
307 ngIRCd 0.0.1, 31.12.2001
309 - erste oeffentliche Version von ngIRCd als "public preview" :-)
313 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $