2 ngIRCd - Next Generation IRC Server
4 (c)2001-2009 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
13 ngIRCd Release 14.1 (2009-05-05)
15 - Security: fix remotely triggerable crash in SSL/TLS code.
16 - Debian: build ngircd-full-dbg package.
17 - Allow ping timeout quit messages to show the timeout value.
19 ngIRCd Release 14 (2009-04-20)
21 ngIRCd 14~rc1 (2009-03-29)
22 - Allow creation of persistent modeless channels.
23 - The INFO command reports the compile time now (if available).
24 - Support individual channel keys for pre-defined channels: introduce
25 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
26 here a file can be configured for each pre-defined channel which contains
27 individual channel keys for different users.
28 - Remove limit on maximum number of predefined channels in ngircd.conf.
30 ngIRCd Release 13 (2008-12-25)
32 ngIRCd 13~rc1 (2008-11-21):
33 - New version number scheme :-)
34 - Initial support for IRC services, using a RFC1459 style interface,
35 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
36 For this to work, ngIRCd now supports server-server links conforming
37 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
38 - Support for SSL-encrypted server-server and client-server links using
39 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
40 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
41 SSLCertFile, SSLDHFile, and SSLConnect.
42 - Server local channels have been implemented, prefix "&", that are only
43 visible to users of the same server and are not visible in the network.
44 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
45 all the messages to it that a user with mode +s receives.
46 - New make target "osxpkg" to build a Mac OS X installer package.
47 - New configuration option "NoIdent" to disable IDENT lookups even if the
48 daemon is compiled with IDENT support.
50 ngIRCd 0.12.1 (2008-07-09)
52 - Add option aliases -V (for --version) and -h (for --help).
53 - Make Listen parameter a comma-separated list of addresses. This also
54 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
55 is treated as Listen="::,0.0.0.0".
56 Note: ListenIPv4 and ListenIPv6 options are still recognized,
57 but ngircd will print a warning if they are used in the config file.
59 ngIRCd 0.12.0 (2008-05-13)
61 ngIRCd 0.12.0-pre2 (2008-04-29)
62 - IPv6: Add config options to disable ipv4/ipv6 support.
64 ngIRCd 0.12.0-pre1 (2008-04-20)
66 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
67 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
68 enhanced test suite to check these commands. (Dana Dahlstrom)
69 - IRC_WHO now supports search patterns and will test this against user
70 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
71 (reported by Dana Dahlstrom)
72 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
73 as if the user had sent PART commands for all channels the user is a
74 member of. (Dana Dahlstrom)
75 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
77 ngIRCd 0.11.0 (2008-01-15)
79 - Add support for /STAT u (server uptime) command.
80 - New [Server] configuration Option "Bind" allows to specify
81 the source IP address to use when connecting to remote server.
82 - New configuration option "MaxNickLength" to specify the allowed maximum
83 length of user nick names. Note: must be unique in an IRC network!
84 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
85 - Added new server configuration option "Passive" for "Server" blocks to
86 disable automatic outgoing connections (similar to -p option to ngircd,
87 but only for the specified server). (Tassilo Schweyer)
88 - Added support for the WALLOPS command. Usage is restricted to IRC
91 ngIRCd 0.10.2 (2007-06-08)
93 - Predefined channel configuration now allows specification of channel key
94 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
95 - When using the epoll() IO interface, compile in the select() interface as
96 well and fall back to it when epoll() isn't available on runtime.
97 - Added support for IO APIs "poll()" and "/dev/poll".
99 ngIRCd 0.10.1 (2006-12-17)
101 - Allow PASS syntax defined in RFC 1459 for server links, too.
102 - New configuration option "PredefChannelsOnly": if set, clients can only
103 join predefined channels.
105 ngIRCd 0.10.0 (2006-10-01)
107 ngIRCd 0.10.0-pre1 (2006-08-02)
108 - Enhanced DIE to accept a single parameter ("comment text") which is sent
109 to all locally connected clients before the server goes down.
110 - JOIN now supports more than one channel key at a time.
111 - Implemented numeric "333": Time and user name who set a channel topic.
112 - Channel topics are no longer limited to 127 characters: now the only limit
113 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
114 limits the topic to about 490 characters due to protocol overhead).
115 - Reverse DNS lookup code now checks the result by doing an additional
116 lookup to prevent spoofing.
117 - Added new IO layer which (optionally) supports epoll() and kqueue() in
118 addition to the select() interface.
120 ngIRCd 0.9.0 (2005-07-24)
122 - Never run with root privileges but always switch the user ID.
123 - Make "netsplit" messages RFC compliant.
124 - Implemented the IRC function "WHOWAS".
125 - New configuration option "OperServerMode" to enable a workaround needed
126 when running an network with ircd2 servers and "OperCanUseMode" enabled
127 to prevent the ircd2 daemon to drop mode changes of IRC operators.
128 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
129 - Implemented support for "secret channels" (channel mode "s").
130 - New configuration option "Mask" for [Operator] sections to limit OPER
131 commands to users with a specific IRC mask. Patch from Florian Westphal.
132 - New configuration variable "PidFile", section "[Global]": if defined,
133 the server writes its process ID (PID) to this file. Default: off.
134 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
135 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
136 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
137 API will be autodetected when you call "./configure --with-rendezvous".
139 ngIRCd 0.8.0 (2004-06-26)
141 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
142 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
143 its root and working directory to something "safe". MotdPhrase is used
144 to define an "MOTD string" instead of a whole file, useful if the
145 "real" MOTD file would be outside the "jail".
146 - INVITE- and BAN-lists become synchronized between IRC+ servers when
147 establishing new connections, if the peer supports this as well.
148 - The type of service (TOS) of all sockets is set to "interactive" now.
149 - Added short command line option "-t" as alternative to "--configtest".
150 - Added optional support for "IDENT" lookups on incoming connections. You
151 have to enable this function with the ./configure switch "--with-ident".
152 The default is not to do IDENT lookups.
154 ngIRCd 0.7.5 (2003-07-11)
156 - New configuration variable "MaxConnectionsIP" to limit the number of
157 simultaneous connections from a single IP that the server will accept.
158 This configuration options lowers the risk of denial of service attacks
159 (DoS), the default is 5 connections per client IP.
160 - Added new configuration variable "Listen" to bind all listening
161 sockets of the server to a single IP address.
163 ngIRCd 0.7.1 (2003-07-18)
165 - Added support for GNU/Hurd.
167 ngIRCd 0.7.0 (2003-05-01)
169 - New command CONNECT to enable and add server links. The syntax is not
170 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
171 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
172 to add a new server (ngIRCd tries to connect new servers only once!).
173 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
174 - New command TRACE (you can trace only servers at the moment).
175 - New command HELP that lists all understood commands.
176 - ngIRCd can register itself with Rendezvous: to enable support pass the
177 new switch "--with-rendezvous" to configure.
178 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
179 configure to enable it.
180 - Changed some configure options to use "--with"/"--without" as prefix
181 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
182 "--with-tcp-wrappers", and "--with-rendezvous".
183 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
184 - Documentation is now installed in $(datadir)/doc/ngircd.
187 Older news (sorry, only available in german language):
189 ngIRCd 0.6.0, 2002-12-24
191 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
192 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
193 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
194 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
195 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
196 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
197 Der Default ist -1, "unlimitiert".
198 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
199 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
200 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
201 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
202 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
203 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
204 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
205 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
206 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
207 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
208 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
209 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
210 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
211 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
212 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
213 miteinander ueber komprimiert Links kommunizieren.
214 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
215 der Channels, in denen ein User Mitglied sein kann, begrent werden.
216 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
218 ngIRCd 0.5.0, 20.09.2002
220 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
221 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
222 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
223 dem "nativen" (ggf. pre-ANSI) Compiler.
224 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
225 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
226 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
227 wenn kein User mehr im Channel ist.
228 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
229 Mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
230 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
231 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
232 "AdminInfo2" und "AdminEMail".
233 - Invite- und Ban-Lists implementiert.
234 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
235 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
236 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
238 ngIRCd 0.4.2, 29.04.2002
240 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
241 Regular Expressions (bis auf "*") unterstuetzt.
243 ngIRCd 0.4.0, 01.04.2002
245 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
246 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
247 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
248 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
249 zusaetzliche Informationen.
250 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
251 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
252 nicht, so wird der naechste probiert.
253 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
254 einen Hash-Wert gesucht: sollte deutlich schneller sein.
255 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
256 gelesen und die dann verwendeten Werte angezeigt.
257 - Client-Mode "s" (Server Notices) implementiert.
258 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
259 alternative Konfigurationsdatei angegeben werden.
260 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
261 zu einer anderen User-ID und Group-ID wechseln.
263 ngIRCd 0.3.0, 02.03.2002
265 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
266 er auf den IRC-Befehl RESTART reagiert.
267 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
268 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
269 Zum Debuggen manchmal ganz praktisch :-)
270 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
271 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
272 - AWAY (und der User-Mode 'a') ist nun implementiert.
273 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
274 - Channel- und Nicknames werden nun ordentlich validiert.
276 ngIRCd 0.2.0, 15.02.2002
278 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
279 Server versteht an User-Modes o und v, beachtet letzteres allerdings
280 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
281 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
282 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
283 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
285 ngIRCd 0.1.0, 29.01.2002
287 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
288 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
289 Chatten in Channels ist aber natuerlich moeglich ;-)
290 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
291 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
292 - FAQ.txt in doc/ begonnen.
294 ngIRCd 0.0.3, 16.01.2002
296 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
297 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
298 IRC-Netzwerk arbeiten.
299 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
300 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
301 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
302 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
303 - neue Befehle: LUSERS, LINKS.
305 ngIRCd 0.0.2, 06.01.2002
307 - neuer Aufbau der Konfigurationsdatei,
308 - mehrere IRC-Operatoren koennen konfiguriert werden,
309 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
310 nur "leafed server" sein, d.h. keine "Client-Server" haben.
312 ngIRCd 0.0.1, 31.12.2001
314 - erste oeffentliche Version von ngIRCd als "public preview" :-)
318 $Id: NEWS,v 1.88 2008/02/26 22:05:42 fw Exp $