2 ngIRCd - Next Generation IRC Server
4 (c)2001-2010 Alexander Barton,
5 alex@barton.de, http://www.barton.de/
7 ngIRCd is free software and published under the
8 terms of the GNU General Public License.
15 - Dump the "internal server state" (configured servers, established
16 connections and known clients) to the console or syslog when receiving
17 the SIGUSR2 signal and debug mode is enabled.
18 - Enable the daemon to disable and enable "debug mode" on runtime using
19 signal SIGUSR1, when debug code is compiled in, not only on startup
20 using the command line parameters.
21 - Signal handler: added new 'delayed' signal handlers, including fallback
22 to deprecated sysv API. And removed global NGIRCd_SignalRehash variable.
23 - IO: add io_cloexec() to set close-on-exec flag.
24 - ng_ipaddr.h: include required assert.h header.
25 - Conn_SyncServerStruct(): test all connections; and work case insensitive
26 - configure script: correctly indent IPv6 yes/no summary output.
27 - Don't reset My_Connections[Idx].lastping when reading data, so the
28 client lag debug-output is working again.
29 - Implement user mode "x": hostname cloaking (closes: #102).
30 - Make configure switch "--docdir" work (closes: #108).
31 - Reformat and update FAQ.txt a little bit.
32 - INSTALL: mention SSL, IPv6, and changed handling of MotdFile.
33 - Change MOTD file handling: ngIRCd now caches the contens of the MOTD
34 file, so the daemon now requires a HUP signal or REHASH command to
35 re-read the MOTD file when its content changed.
36 - Startup: open /dev/null before chroot'ing the daemon.
37 - Allow IRC ops to change channel modes even without OperServerMode set.
38 - Allow IRC operators to use MODE command on any channel (closes: #100).
39 - Added mailmap file for git-[short]log and git-blame.
40 - Authenticated users should be registered without the "~" mark.
41 - Set NoPAM=yes in configuration files used for the testsuite.
42 - New configuration option "NoPAM" to disable PAM.
43 - Implement asynchronous user authentication using PAM, please see the
44 file doc/PAM.txt for details.
45 - Resolver: Implement signal handler and catch TERM signals.
46 - Don't set a penalty time when doing DNS lookups.
47 - Add some documentation for using BOPM with ngIRCd, see doc/Bopm.txt.
48 - Implement user mode "c": receive connect/disconnect NOTICEs. Note that
49 this new mode requires the user to be an IRC operator.
50 - ngircd.init: require "$network" and "$remote_fs" when stopping ngircd.
51 - Show SSL status in WHOIS output, numeric 275.
52 - Include correct header files when testing for arpa/inet.h (Closes: #105).
53 - Don't access already freed memory in IRC_KILL().
54 - Fix "beeing" typo ...
55 - SSL/TLS: fix bogus "socket closed" error message.
57 ngIRCd Release 16 (2010-05-02)
59 - doc/SSL: remove line continuation marker
61 ngIRCd 16~rc2 (2010-04-25)
62 - Updated some more copyright notices, it's 2010 already :-)
63 - Only compile in Get_Error() if really needed
64 - Fix gcc warning "ignoring return value of ..."
65 - Include netinet/in_systm.h alongside netinet/ip.h
66 - Include netinet/{in.h, in_systm.h} when checking for netinet/ip.h
67 - Only include <netinet/in_systm.h> if it exists
68 - Updated doc/Platforms.txt
69 - Enhace connection statistics counters: display total number of served
70 connections on daemon shutdown and when a new client connects using
71 the new numeric RPL_STATSCONN (250).
73 ngIRCd 16~rc1 (2010-03-25)
74 - Various fixes to the build system and code cleanups.
75 - contrib/platformtest.sh: Only show latest commit.
76 - Updatet doc/Platforms.txt, added new README-Interix.txt documenting
77 how to tun ngIRCd on Microsoft Services for UNIX (MS SFU, MS SUA).
78 - Updated links to the ngIRCd homepage (bug tracker, mailing list).
79 - Added missing modes to USERMODES #define
80 - Show our name (IRCD=ngIRCd) in ISUPPORT (005) numeric
81 - Quote received messages of ERROR commands in log output.
82 - ngircd.conf manual page: document missing "Password" variable.
83 - Implement WEBIRC command used by some Web-IRC frontends. The password
84 required to secure this command must be configured using the new
85 "WebircPassword" variable in the ngircd.conf file.
86 - Don't use port 6668 as example for both "Ports" and "SSLPorts".
87 - Remove limit on max number of configured irc operators.
88 - Only link "nsl" library when really needed.
89 - A new channel mode "secure connections only" (+z) has been implemented:
90 Only clients using a SSL encrypted connection to the server are allowed
91 to join such a channel.
92 But please note three things: a) already joined clients are not checked
93 when setting this mode, b) IRC operators are always allowed to join
94 every channel, and c) remote clients using a server not supporting this
95 mode are not checked either and therefore always allowed to join.
97 ngIRCd Release 15 (2009-11-07)
99 - "ngircd --configtest": print SSL configuration options even when unset.
101 ngIRCd 15~rc1 (2009-10-15)
102 - Do not add default listening port (6667) if SSL ports were specified, so
103 ngIRCd can be configured to only accept SSL-encrypted connections now.
104 - Enable IRC operators to use the IRC command SQUIT (insted of the already
105 implemented but non-standard DISCONNECT command).
106 - New configuration option "AllowRemoteOper" (disabled by default) that
107 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
109 - Mac OS X: fix test for packagemaker(1) tool in Makefile and use gcc 4.0
110 for Mac OS X 10.4 compatibility in the Xcode project file.
111 - Fix --with-{openssl|gnutls} to accept path names.
112 - Fix LSB header of Debian init script.
113 - Updated doc/Platforms.txt and include new script contrib/platformtest.sh
114 to ease generating platform reports.
115 - Fix connection information for already registered connections.
116 - Enforce upper limit on maximum number of handled commands. This implements
117 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
118 per second before a one second pause is enforced.
119 - Fix connection counter.
120 - Fix a few error handling glitches for SSL/TLS connections.
121 - Minor fixes to manual pages and documentation.
123 ngIRCd Release 14.1 (2009-05-05)
125 - Security: fix remotely triggerable crash in SSL/TLS code.
126 - BSD start script contrib/ngircd.sh has been renamed to ngircd-bsd.sh.
127 - New start/stop script for RedHat-based distributions:
128 contrib/ngircd-redhat.init, thanks to Naoya Nakazawa <naoya@sanow.net>.
129 - Doxygen: update source code repository link to GIT.
130 - Debian: build ngircd-full-dbg package.
131 - Allow ping timeout quit messages to show the timeout value.
132 - Fix error handling on compressed links.
133 - Fix server list announcement.
134 - Do not remove hostnames from info text.
136 ngIRCd Release 14 (2009-04-20)
138 - Display IPv6 addresses as "[<addr>]" when accepting connections.
140 ngIRCd 14~rc1 (2009-03-29)
141 - Updated Debian/Linux init script (see contrib/Debian/ngircd.init).
142 - Allow creation of persistent modeless channels.
143 - The INFO command reports the compile time now (if available).
144 - Spell check and enhance ngIRCd manual pages.
145 - Channel mode changes: break on syntax errors in MODE command.
146 - Support individual channel keys for pre-defined channels: introduce
147 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
148 here a file can be configured for each pre-defined channel which contains
149 individual channel keys for different users.
150 - Remove limit on maximum number of predefined channels in ngircd.conf.
151 - Updated ngircd.spec file for building RPM packages.
152 - Add new and missing files to Mac OS X Xcode project, and update project.
153 - Reject masks with wildcard after last dot.
154 - TLS/SSL: remove useless error message when ssl connection is closed.
155 - Fix memory leak when a encrypted and compressed server link goes down.
156 (closes bug #95, reported by Christoph, fiesh@fiesh.homeip.net)
157 - Fix handling of channels containing dots.
158 (closes ug #93, reported by Gonosz Csiga)
160 ngIRCd Release 13 (2008-12-25)
162 - Updated documentation, especially doc/Services.txt and doc/SSL.txt.
163 - Make the test suite work on OpenSolaris.
165 ngIRCd 13~rc1 (2008-11-21):
166 - New version number scheme :-)
167 - Initial support for IRC services, using a RFC1459 style interface,
168 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
169 For this to work, ngIRCd now supports server-server links conforming
170 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
171 - Support for SSL-encrypted server-server and client-server links using
172 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
173 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
174 SSLCertFile, SSLDHFile, and SSLConnect.
175 - Server local channels have been implemented, prefix "&", that are only
176 visible to users of the same server and are not visible in the network.
177 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
178 all the messages to it that a user with mode +s receives.
179 - New make target "osxpkg" to build a Mac OS X installer package.
180 - Debug mode: enable support for GNU libc memory tracing (see mtrace(3)).
181 - SysV init script: use LSB logging functions, if available.
182 - Added some more FAQ entries (regarding logging and IRC operators).
183 - Allow IRC operators to overwrite channel limits.
184 - Support for enhanced PRIVMSG and NOTICE message targets.
185 - More tests have been added to the test-suite ("make check"), and two
186 servers are started for testing server-server linking.
187 - Added a timestamp to log messages to the console.
188 - New configuration option "NoIdent" to disable IDENT lookups even if the
189 daemon is compiled with IDENT support.
191 ngIRCd 0.12.1 (2008-07-09)
193 - Allow mixed line terminations (CR+LF/CR/LF) in non-RFC-compliant mode
194 - Don't allow stray \r or \n in command parameters
195 - --configtest: return non-zero exit code if there are errors
196 - Update ngIRCd manual pages
197 - Add option aliases -V (for --version) and -h (for --help).
198 - Fix 'no-ipv6' compile error.
199 - Make Listen parameter a comma-separated list of addresses. This also
200 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
201 is treated as Listen="::,0.0.0.0".
202 Note: ListenIPv4 and ListenIPv6 options are still recognized,
203 but ngircd will print a warning if they are used in the config file.
205 ngIRCd 0.12.0 (2008-05-13)
207 - Fix Bug: 85: "WHO #SecretChannel" that user is not a member of now returns
208 proper RPL_ENDOFWHO_MSG instead of nothing. (Ali Shemiran)
209 - Fix compile on FreeBSD 5.4 and AIX.
210 - If bind() fails, also print IP address and not just the port number.
212 ngIRCd 0.12.0-pre2 (2008-04-29)
213 - IPv6: Add config options to disable ipv4/ipv6 support.
214 - Don't include doc/CVS.txt in distribution archive, use doc/GIT.txt now!
215 - Documentation: get rid of some more references to CVS, switch to GIT.
216 - Get rid of cvs-version.* and CVSDATE definition.
217 - Report ERR_NOTONCHANNEL when trying to part a channel one is not member of.
218 - Testsuite: remove erroneous ConfUID setting in config file.
220 ngIRCd 0.12.0-pre1 (2008-04-20)
221 - Include Mac OS X Xcode project in distribution archives.
222 - Do not exit on SIGHUP or /REHASH if the config file cannot opened.
224 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
225 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
226 enhanced test suite to check these commands. (Dana Dahlstrom)
227 - RPL_WHOREPLY messages generated by IRC_WHO didn't include flags (*,@,+).
229 - IRC_WHO now supports search patterns and will test this against user
230 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
231 (reported by Dana Dahlstrom)
232 - Add test cases for "WHO" command. (Dana Dahlstrom)
233 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
234 as if the user had sent PART commands for all channels the user is a
235 member of. (Dana Dahlstrom)
236 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
238 ngIRCd 0.11.1 (2008-02-26)
240 - Fix sending of JOIN commands between servers when remote server appended
241 mode flags. (Rolf Eike Beer) [from HEAD]
242 - Send "G" instead of "H" flag in WHO replies. (reported by Dana Dahlstrom)
243 - Under some circumstances ngIRCd issued channel MODE message with a
244 trailing space. (Dana Dahlstrom) [from HEAD]
246 ngIRCd 0.11.0 (2008-01-15)
248 ngIRCd 0.11.0-pre2 (2008-01-07)
249 - SECURITY: IRC_PART could reference invalid memory, causing
250 ngircd to crash [from HEAD]. (CVE-2008-0285)
252 ngIRCd 0.11.0-pre1 (2008-01-02)
253 - Use dotted-decimal IP address if hostname is >= 64.
254 - Add support for /STAT u (server uptime) command.
255 - New [Server] configuration Option "Bind" allows to specify
256 the source IP address to use when connecting to remote server.
257 - New configuration option "MaxNickLength" to specify the allowed maximum
258 length of user nick names. Note: must be unique in an IRC network!
259 - Enhanced the IRC+ protocol to support an enhanced "server handshake" and
260 enable server to recognize numeric 005 (ISUPPORT) and 376 (ENDOFMOTD).
261 See doc/Protocol.txt for details.
262 - Re-added doc/SSL.txt to distribution -- got lost somewhere!?
263 - Fixes the wrong logging output when nested servers are introduced
264 to the network as well as the wrong output of the LINKS command.
265 - Update Mac OS X Xcode project file for Xcode 3.
266 - Adjust test suite to be usable on HP/UX 11.11 :-)
267 - Fix code to compile using K&R C compiler and ansi2kr again.
268 - New config option NoDNS: Disables DNS lookups when clients connect.
269 - Fixed propagation of channel mode 'P' on server links.
270 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
271 - Fixed code that prevented GCC 2.95 to compile ngIRCd.
272 - Adjust path names in manual pages according to "./configure" settings.
273 - Added new server configuration option "Passive" for "Server" blocks to
274 disable automatic outgoing connections (similar to -p option to ngircd,
275 but only for the specified server). (Tassilo Schweyer)
276 - Don't connect to a server if a connection to another server within the
277 same group is already in progress.
278 - Added support for the WALLOPS command. Usage is restricted to IRC
281 ngIRCd 0.10.4 (2008-01-07)
283 - SECURITY: IRC_PART could reference invalid memory, causing
284 ngircd to crash [from HEAD]. (CVE-2008-0285)
286 ngIRCd 0.10.3 (2007-08-01)
288 - SECURITY: Fixed a severe bug in handling JOIN commands, which could
289 cause the server to crash. Thanks to Sebastian Vesper, <net@veoson.net>.
292 ngIRCd 0.10.2 (2007-06-08)
294 ngIRCd 0.10.2-pre2 (2007-05-19)
295 - Server links are allowed to use larger write buffers now (up to 50 KB).
297 ngIRCd 0.10.2-pre1 (2007-05-05)
298 - Fix compressed server links (broken since 0.10.0).
299 - Predefined Channel configuration now allows specification of channel key
300 (mode k) and maximum user count (mode l).
301 - When using epoll() IO interface, compile in the select() interface as
302 well and fall back to it when epoll() isn't available on runtime.
303 - New configure option "--without-select" to disable select() IO API
304 (even when using epoll(), see above).
305 - Added support for IO APIs "poll()" and "/dev/poll".
306 - Reorganized internal handling of invite and ban lists.
308 ngIRCd 0.10.1 (2006-12-17)
310 - Fixed validation of server names containing digits.
311 - Update the "info text" of the local server after re-reading configuration.
312 - Changed Numerics 265 and 266 to follow ircd 2.11.x "standards".
313 - Allow PASS syntax defined in RFC 1459 for server links, too.
314 - Enhanced ISUPPORT message (005 numeric).
315 - New configuration option "PredefChannelsOnly": if set, clients can only
316 join predefined channels.
317 - Code cleanups: use "LogDebug(...)" instead of "Log(LOG_DEBUG, ...)", use
318 "strcspn()", unsigned vs. signed, use "const", fix whitespaces, ...
320 ngIRCd 0.10.0 (2006-10-01)
322 - Fixed file handle leak when daemon is not able to send MOTD to a client.
324 ngIRCd 0.10.0-pre2 (2006-09-09)
325 - Fixed build problems with GCC option -fstack-protector.
326 - Minor documentation updates.
328 ngIRCd 0.10.0-pre1 (2006-08-02)
329 - Validate "ServerName" (see RFC 2812, section 2.3.1).
330 - Enhanced DIE to accept a single parameter ("comment text") which is sent
331 to all locally connected clients before the server goes down.
332 - The ngIRCd handles time shifts backwards more gracefully now (the
333 timeout handling doesn't disconnect clients by mistake any more).
334 - Internal: Restructured connection handling (the connection ID is equal
335 to the file descriptor of the connection).
336 - Internal: Simplified resolver code.
337 - JOIN now supports more than one channel key at a time.
338 - Implemented numeric "333": Time and user name who set a channel topic.
339 - Enhanced the handler for PING and PONG commands: fix forwarding and enable
340 back-passing of a client supplied additional argument of PING.
341 - Changed handling of timeouts for unregistered connections: don't reset
342 the counter if data is received and disconnect clients earlier.
343 - Removed unnecessary #define of "LOCAL", now use plain C "static" instead.
344 - Channel topics are no longer limited to 127 characters: now the only limit
345 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
346 limits the topic to about 490 characters due to protocol overhead).
347 - Reverse DNS lookup code now checks the result by doing an additional
348 lookup to prevent spoofing.
349 - Added new IO layer which (optionally) supports epoll() and kqueue() in
350 addition to the select() interface.
352 ngIRCd 0.9.2 (2005-10-15)
354 - Fixed a bug that could cause the daemon to crash when outgoing server
355 connections can't be established.
356 - Fixed a bug that caused the daemon to leak file descriptors when no
357 resolver subprocesses could be created.
358 - Fixed server NOTICEs to users with "s" mode ("server messages").
359 - Fixed a format string bug in "connection statistics" messages to clients.
361 ngIRCd 0.9.1 (2005-08-03)
363 - The KILL command killed much more than desired (including server links!)
364 when the target user is connected to a remote server. Bug introduced in
365 ngIRCd 0.9.0 ... Reported by <qssl@fastmail.fm>, Thanks!
366 - Changed some constants to be "signed" (instead of unsigned) to solve
367 problems with old (pre-ANSI) compilers.
369 ngIRCd 0.9.0 (2005-07-24)
371 ngIRCd 0.9.0-pre1 (2005-07-09)
372 - Fixed maximum length of user names, now allow up to 9 characters.
373 - Cut off oversized IRC messages that should be sent to the network instead
374 of shutting down the (wrong) connection.
375 - Don't generate error messages for unknown commands received before the
376 client is registered with the server (like the original ircd).
377 - Never run with root privileges but always switch the user ID.
378 - Make "netsplit" messages RFC compliant.
379 - Fix handling of QUIT Messages: send only one message, even if the client
380 is member of multiple channels.
381 - Don't exit server if closing of a socket fails; instead ignore it and
382 pray that this will be "the right thing" ...
383 - Implemented the IRC function "WHOWAS".
384 - Don't enable assert() calls when not ./configure'd with --enable-debug.
385 - Fixed ./configure test for TCP Wrappers: now it runs on Mac OS X as well.
386 - Enhanced configure script: now you can pass an (optional) search path
387 to all --with-XXX parameters, e. g. "--with-ident=/opt/ident".
388 - Removed typedefs for the native C datatypes.
389 Use stdbool.h / inttypes.h if available.
390 - New configuration option "OperServerMode" to enable a workaround needed
391 when running an network with ircd2 servers and "OperCanUseMode" enabled
392 to prevent the ircd2 daemon to drop mode changes of IRC operators.
393 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
394 - Implemented support for "secret channels" (channel mode "s").
395 - New configuration option "Mask" for [Operator] sections to limit OPER
396 commands to users with a specific IRC mask. Patch from Florian Westphal.
397 - Write "error file" (/tmp/ngircd-XXX.err) only if compiled with debug
398 code ("--enable-debug") and running as daemon process.
399 - Don't create version information string each time a client connects
400 but instead on server startup. By Florian Westphal.
401 - New configuration variable "PidFile", section "[Global]": if defined,
402 the server writes its process ID (PID) to this file. Default: off.
403 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
404 - Code cleanups from Florian Westphal, <westphal@foo.fh-furtwangen.de>.
405 - Raised the maximum length of passwords to 20 characters.
406 - Fixed a memory leak when resizing the connection pool and realloc()
407 failed. Now we don't fall back to malloc(), which should be sane anyway.
408 Patch from Florian Westphal, <westphal@foo.fh-furtwangen.de>.
409 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
410 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
411 API will be autodetected when you call "./configure --with-rendezvous".
412 - Made ngIRCd compile on HP/UX 10.20 with native HP pre-ANSI C compiler and
413 most probably other older C compilers on other systems.
414 - When the daemon should switch to another user ID (ServerID is defined in
415 the configuration file) and is not running in a chroot environment, it
416 changes its working directory to the home directory of this user. This
417 should enable the system to write proper core files when not running with
420 ngIRCd 0.8.3 (2005-02-03)
422 - Fixed a bug that could case a root exploit when the daemon is compiled
423 to do IDENT lookups and is logging to syslog. Bug discovered by CoKi,
424 <coki@nosystem.com.ar>, thanks a lot!
425 (CVE-2005-0226; http://www.nosystem.com.ar/advisories/advisory-11.txt)
427 ngIRCd 0.8.2 (2005-01-26)
429 - Added doc/SSL.txt to distribution.
430 - Fixed a buffer overflow that could cause the daemon to crash. Bug found
431 by Florian Westphal, <westphal@foo.fh-furtwangen.de>. (CVE-2005-0199)
432 - Fixed a possible buffer underrun when reading the MOTD file. Thanks
433 to Florian Westphal, <westphal@foo.fh-furtwangen.de>.
434 - Fixed detection of IRC lines which are too long to send. Detected by
435 Florian Westphal, <westphal@foo.fh-furtwangen.de>.
436 - Fixed return values of our own implementation of strlcpy(). The code has
437 been taken from rsync and they fixed it, but we didn't until today :-/
438 It has only been used when the system didn't implement strlcpy by itself,
439 not on "modern" systems. Florian Westphal, <westphal@foo.fh-furtwangen.de>.
441 ngIRCd 0.8.1 (2004-12-25)
443 - Autoconf: Updated config.guess and config.sub
444 - Added some more debug code ...
445 - Fixed wrong variable names in output of "ngircd --configtest".
446 - Debian: Fixed the name of the "default file" in the init script for
447 ngircd-full packages. And do the test if the binary is executable after
449 - Enhanced the "test suite": please have a look at src/testsuite/README!
451 ngIRCd 0.8.0 (2004-06-26)
453 - Fixed wrong buffer size calculation for results of the resolver.
455 ngircd 0.8.0-pre2 (2004-05-16)
456 - Enhanced logging to console when running in "no-detached mode": added
457 PID and log messages of resolver sub-processes.
458 - Fixed host name lookups when using IDENT user lookups.
459 - "make clean" and "make maintainer-clean" remove more files now.
461 ngIRCd 0.8.0-pre1 (2004-05-07)
462 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
463 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
464 its root and working directory to something "safe". MotdPhrase is used
465 to define an "MOTD string" instead of a whole file, useful if the
466 "real" MOTD file would be outside the "jail".
467 - INVITE- and BAN-lists become synchronized between IRC+ servers when
468 establishing new connections, if the peer supports this as well.
469 - Reorganized autogen.sh and configure scripts.
470 - Fixed a wrong assert() which could cause the daemon to exit spuriously
471 when closing down connections.
472 - Better logging of decompression errors returned by zlib.
473 - Servers other than the destination server didn't clean up the invite
474 list of an "invite-only" channel properly when an INVITE'd user joined.
475 - Changed the reply of the MODE command to match the syntax of the
476 original ircd exactly: the unnecessary but missing ":" before the last
477 parameter has been added.
478 - Fixed TRACE: don't output "Serv" lines for ourself; display more info.
479 - Results of the resolver (hostnames and IDENT names) are discarded after
480 the client is successfully registered with the server.
481 - Better logging while establishing and shutting down connections.
482 - The type of service (TOS) of all sockets is set to "interactive" now.
483 - Added short command line option "-t" as alternative to "--configtest".
484 - Added optional support for "IDENT" lookups on incoming connections. You
485 have to enable this function with the ./configure switch "--with-ident".
486 The default is not to do IDENT lookups.
488 ngIRCd 0.7.7 (2004-02-05)
490 - The info text ("real name") of users is set to "-" if none has been
491 specified using the USER command (e. g. "USER user * * :"). Reason:
492 the original ircd doesn't like empty ones and would KILL such users.
493 - Fixed (optional) TCP Wrapper test which was broken and could result in
494 false results. Thanks to Fuminori Tanizaki <tany@mcnet.ad.jp>!
495 - Removed "USE_" prefixes of configuration #defines.
497 ngIRCd 0.7.6 (2003-12-05)
499 - Fixed abort() ("server crash") when INVITE'ing users to nonexistent
500 channels. Bug found by <hiddenx@wp.pl>.
501 - Extended version numbering of CVS versions (added date).
502 - Enhanced/fixed doc/Protocol.txt;
504 ngIRCd 0.7.5 (2003-11-07)
506 - Fixed ban behavior: users which are banned from a channel can't no
507 longer send PRIVMSG's to this channel (fixes Bug #47).
508 - Fixed and enhanced the "penalty handling" of the server: commands that
509 require more resources block the client for a short time.
510 - Changed the internal time resolution to one second.
511 - New configuration variable "MaxConnectionsIP" to limit the number of
512 simultaneous connections from a single IP that the server will accept.
513 This configuration options lowers the risk of denial of service attacks
514 (DoS), the default is 5 connections per client IP.
515 - Fixed build problems under Mac OS X 10.3.
516 - Use "-pipe" when compiling with gcc, speeds things up a little :-)
517 - Added new configuration variable "Listen" to bind all listening
518 sockets of the server to a single IP address.
519 - Suppress misleading error message of diff during make run.
520 - Enhanced test-suite and made it work on GNU/Hurd.
521 - Fixed minor typo in debug output :-)
523 ngIRCd 0.7.1 (2003-07-18)
525 - Included files to build Debian packages (located in "debian/").
526 - Updated config.guess and config.sub to newer upstream versions.
527 - NJOIN propagates user channel modes correctly again ... Upsa.
528 - Made Makefile more compatible with "make -j<n>".
529 - Added support for GNU/Hurd.
530 - Fixed a compiler warning related to an unnecessary assert().
531 - Enhanced VERSION command when using debug versions.
533 ngIRCd 0.7.0 (2003-05-01)
535 - "ServerName" is checked better now: a dot (".") is required.
536 - The KILL command verifies and logs more parameters.
538 ngIRCd 0.7.0-pre2 (2003-04-27)
539 - CVS build system fixes (made autogen.sh more portable).
540 - Fixed compilation and test-suite on Solaris (tested with 2.6).
541 - New documentation file "doc/Platforms.txt" describing the status of
542 ngIRCd on the various tested platforms.
543 - Test for broken GCC on Mac OS X and disable "-pedantic" in this case.
544 - Disable "-ansi" on Cygwin: system headers are incompatible.
545 - The server tried to connect to other servers only once when DNS or
546 socket failures occurred.
547 - Fixed --configtest: There is no variable "ServerPwd", it's "Password".
549 ngIRCd 0.7.0-pre1 (2003-04-22)
550 - New signal handler (more secure, actions are executed outside).
551 - GCC: the compiler is now called with more warning options enabled.
552 - Replaced a lot of str[n]cpy(), str[n]cat() and sprintf() calls with the
553 more secure functions strlcpy(), strlcat() and snprintf(). On systems
554 that don't support strlcpy() and strlcat(), these functions are included
555 in the libngportab now (with prototypes in portab.h).
556 - If the server can't close a socket, it panics now. This is an error that
557 can't occur during normal operation so there is something broken.
558 - The order of log messages during disconnects is more "natural" now ;-)
559 - Cleaned up handling of server configuration structures: modifying and
560 removing servers during runtime works more reliable now.
561 - Compression code from "conn.[ch]" is now found in new "conn-zip.[ch]"
562 - Moved some connection functions from "conn.[ch]" to "conn-func.[ch]".
563 - New command CONNECT to enable and add server links. The syntax is not
564 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
565 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
566 to add a new server (ngIRCd tries to connect new servers only once!).
567 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
568 - Restructured the documentation: Now the main language is English. The
569 german documentation has been removed (until there is a maintainer).
570 - Enhanced killing of users caused by a nickname collision.
571 - Better error detection for status code ("numerics") forwarding.
572 - Moved tool functions to own library: "libngtool".
573 - New command TRACE (you can trace only servers at the moment).
574 - New command HELP that lists all understood commands.
575 - There should no longer remain "unknown connections" (see e.g. LUSERS)
576 if an outgoing server link can't be established.
577 - Added AC_PREREQ(2.50) to configure.in for better autoconf compatibility.
578 - Conn_Close() now handles recursive calls for the same link correctly.
579 - ngIRCd can register itself with Rendezvous: to enable support pass the
580 new switch "--with-rendezvous" to configure.
581 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
582 configure to enable it.
583 - Changed some configure options to use "--with"/"--without" as prefix
584 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
585 "--with-tcp-wrappers", and "--with-rendezvous".
586 - Better error reporting to clients on connect.
587 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
588 - Documentation is now installed in $(datadir)/doc/ngircd.
589 - Enhanced handling of NJOIN in case of nick collisions.
591 ngIRCd 0.6.1, 2003-01-21
593 - Fixed KILL: you can't crash the server by killing yourself any more,
594 ngIRCd no longer sends a QUIT to other servers after the KILL, and you
595 can kill only valid users now.
596 - The server no longer forwards commands to ordinary users, instead it
597 answers with the correct error message ("no such server") now.
598 - WHOIS commands weren't always forwarded as requested.
599 - The server sets a correct default AWAY message now when propagating
600 between servers (bug introduced in 0.6.0).
601 - Fixed up and enhanced CHANINFO command: channel keys and user limits
602 are synchronized between servers now, too.
603 - MODE returns the key and user limit for channel members correctly now.
604 - Non-members of a channel could crash the server when trying to change
605 its modes or modes of its members.
606 - The server didn't validate weather a target user is a valid channel
607 member when changing his channel user modes which could crash ngIRCd.
610 Older changes (sorry, only available in german language):
612 ngIRCd 0.6.0, 2002-12-24
614 ngIRCd 0.6.0-pre2, 2002-12-23
615 - neuer Numeric 005 ("Features") beim Connect.
616 - LUSERS erweitert: nun wird die maximale Anzahl der lokalen und globalen
617 Clients, die dem Server bzw. im Netzwerk seit dem letzten (Re-)Start
618 dem Server gleichzeitig bekannt waren, angezeigt.
620 ngIRCd 0.6.0-pre1, 2002-12-18
621 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
622 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
623 - der Server wartet bei einer eingehenden Verbindung nun laenger auf den
624 Resolver (4 Sekunden), wenn das Ergebnis eintrifft setzt er aber den
625 Login sofort fort (bisher wurde immer mind. 1 Sekunde gewartet).
626 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
627 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
628 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sektion "Global")
629 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
630 Der Default ist -1, "unlimitiert".
631 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
632 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
633 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
634 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
635 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
636 - Test-Suite und Dokumentation an A/UX angepasst.
637 - unter HP-UX definiert das configure-Script nun _XOPEN_SOURCE_EXTENDED.
638 - Server identifizieren sich nun mit asyncronen Passwoertern, d.h. das
639 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
640 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
641 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
642 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
643 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
644 - Channel-Mode "P" ("persistent") kann nur noch von IRC-Operatoren gesetzt
645 werden. Grund: User koennen den Server sonst leicht "Channel-Flooden".
646 - MOTD kann nun an andere Server geforwarded werden.
647 - IRC-Befehl "TIME" implementiert.
648 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
649 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
650 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
651 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
652 miteinander ueber komprimiert Links kommunizieren.
653 - Handling der Schreibpuffer umgestellt: Server sollte schneller arbeiten.
654 - Prefix-Fehler werden besser protokolliert (mit verursachendem Befehl).
655 - SQUIT wird nicht mehr doppelt an andere Server weitergeleitet.
656 - Der Server versucht nun vor dem Schliessen einer Verbindung Daten, die
657 noch im Schreibpuffer stehen, zu senden.
658 - Source in weiteres Modul "irc-info" aufgespalten.
659 - Konfigurationsvariablen werden besser validiert: Laengen, Zahlen, ...
660 - neuen Befehl STATS begonnen: bisher unterstuetzt wird "l" und "m".
661 - bei ISON und USERHOST fehlte im Ergebnis-String der korrekte Absender.
662 - IRC Operatoren koennen nun mit KILL User toeten. Achtung: ein Grund muss
663 zwingend als zweiter Parameter angegeben werden!
664 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
665 der Channels, in denen ein User Mitglied sein kann, begrent werden.
666 - neuer, deutlich flexiblerer Parser fuer den MODE Befehl.
667 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
669 ngIRCd 0.5.4, 24.11.2002
671 - Fehler-Handling von connect() gefixed: der Server kann sich nun auch
672 unter A/UX wieder zu anderen verbinden.
673 - in den Konfigurationsvariablen ServerUID und ServerGID kann nun nicht
674 nur die numerische ID, sondern auch der Name des Users bzw. der Gruppe
675 verwendet werden. Beim Start des Daemons wird nun beides angezeigt.
676 - Besseres Logging von Prefix-Fehlern.
677 - angenommene Sockets werden nun korrekt auf "non-blocking" konfiguriert,
678 beim Senden und Empfangen werden Blockierungen besser abgefangen.
679 - RPL_UMODEIS hat Code 221, nicht 211 ... *argl*
680 - select() in Try_Write() hat falschen (keinen!) Timeout verwendet;
681 die "Zeit-Aufloesung" des Servers sind zudem nun 2 Sekunden (TIME_RES).
682 Insgesamt sollte die Reaktionszeit des Server nun besser sein.
684 ngIRCd 0.5.3, 08.11.2002
686 - NOTICE liefert nun wirklich nie mehr einen Fehler, auch dann nicht,
687 wenn der sendende Client noch gar nicht registriert ist.
688 - ein "schneller Server-Reconnect" wird nur noch dann versucht, wenn die
689 Verbindung zuvor ordentlich (="lange genug") in Ordnung war; somit also
690 nicht meht, wenn der Peer-Server gleich beim Connect ein ERROR liefert.
691 Das vermeidet "Connect-Orgien".
692 - einige Datentypen aufgeraumt: z.B. sind viele INT32s nun LONGs. Das ist
693 auf Platformen mit 8-Byte-Integern kompatibler.
694 - RPL_YOURHOST_MSG ist nun ircII- und RFC-kompatibel ;-)
695 - Segfault unter hoher Netzaktivitaet behoben: in Conn_Close() wird die
696 Connection-Struktur nun frueher als "ungueltig" markiert.
698 ngIRCd 0.5.2, 04.10.2002
700 - Buffer Overflow in Read_Resolver_Result() behoben.
701 - Format-String-Bugs, die zum Abbruch des Servers fuehrten, behoben.
702 - Maximale Laenge eines IRC-Prefix wurde falsch berechnet.
704 ngIRCd 0.5.1, 03.10.2002
706 - in RPL_YOURHOST_MSG wurde ein fehlerhafter Versionsstring geliefert.
707 - Test-Suite: start-server.sh, stop-server.sh und stress-server.sh koennen
708 nun "manuell" von der Kommandozeile gestartet werden, stress-server.sh
709 startet per Default nur noch 5 Sessions, eine andere Zahl kann auf der
710 Kommandozeile uebergeben werden (Syntax: "stress-server.sh <count>").
711 - In bestimmten Faellen hat der Server versucht auf einen bereits wieder
712 geschlossenen Socket Daten zu schreiben; das fuehrte zu einem Abbruch des
713 Servers durch ein assert(). Nun wird geprueft, ob der Socket noch ok ist.
714 - im "contrib"-Verzeichnis befindet sich nun eine RPM-Spec-Datei, aus den
715 .tar.gz's koennen nun mit "rpm -ta <archiv>" RPM's erzeugt werden. Danke
716 an Sean Reifschneider <jafo@tummy.com>!
717 - Syntax von RPL_MYINFO_MSG korrigiert: liefert nun vier Parameter.
719 ngIRCd 0.5.0, 20.09.2002
721 - Dokumentation aktualisiert.
722 - Fehler bei Validierung von "AdminInfo2" behoben.
723 - Test der Flags fuer "ps" in der Testsuite verbessert, ist nun zu mehr
724 Plattformen kompatibler.
726 ngIRCd 0.5.0-pre2, 17.09.2002
727 - Fix in IRC_WriteStrServersPrefix() war "badly broken" -- behoben.
729 ngIRCd 0.5.0-pre1, 16.09.2002
730 - Manual-Pages ngircd.8 und ngircd.conf.5 begonnen.
731 - Wird der Netzwerk-Sniffer aktiviert (--sniffer), so schaltet der
732 ngIRCd nun automatisch in den Debug-Modus.
733 - auf Systemen, die inet_aton() nicht kennen (wie z.B. A/UX), kann der
734 ngIRCd nun dennoch auch aktiv Server-Links aufbauen.
735 - h_errno wird auf Systemen, die das nicht kennen (wie z.B. HP-UX 10.20)
736 nicht mehr verwendet. Somit compiliert der ngIRCd nun auch dort :-)
737 - um auf dem Ziel-System nicht vorhandene Funktionen nachzubilden wird nun
738 die "libngportab" erzeugt; genutzt wird dies bisher fuer vsnprintf().
739 Nun compiliert der ngIRCd auch unter Solaris 2.5.1.
740 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
741 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
742 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
743 wenn kein User mehr im Channel ist. Zu Channel-Operatoren werden bisher
744 nur IRC-Operatoren, die den Channel betreten. Die persistenten Channels
745 werden durch das Flag "P" gelennzeichnet, welches normal durch Channel-
746 Op's gesetzt und geloescht werden kann.
747 - bei "--configtest" werden keine leere Abschnitte mehr ausgegeben.
748 - Source in weitere Module aufgespalten: lists, irc-op und resolve.
749 - #include's aufgeraeumt: Header includieren keine anderen mehr.
750 - KICK implementiert (bisher kann nur ein User aus einem Channel geckicked
751 werden, Listen, wir im RFC vorgesehen, werden bisher nicht unterstuetzt).
752 - INVITE, den Channel-Mode "i" sowie Invite-Lists ueber den MODE-Befehl
753 (setzen, erfragen und loeschen) implementiert.
754 - Source an ansi2knr fuer pre-ANSI-Compiler angepasst; ansi2knr in Source-
755 Tree aufgenommen und in Build-System integriert; der ngIRCd compiliert
756 nun z.B. unter A/UX mit dem nativen Compiler von Apple.
757 - TOPIC lieferte bei unbekanntem Channel einen falschen Fehlercode.
758 - LIST versteht nun Wildcards und kann an andere Server geforwarded werden.
759 - wurde ein KILL fuer nicht-lokale Clients empfangen, so wurden die
760 Verwaltungs-Strukturen nicht korrekt freigegeben.
761 - empfangene NJOIN's wurden "zerhackt" an andere Server weitergegeben.
762 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
763 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
764 - Dokumentation des neuen IRC+-Protokolls begonnen: doc/Protocol.txt
765 - Protokoll- und Server-ID bei PASS-Befehlen auf neues Format umgestellt;
766 bei empfangenen PASS-Befehlen werden diese zudem nun auch ausgewertet.
767 Die unterstuetzten Flags sind in doc/Protocol.txt beschrieben.
768 - mit dem neuen Befehl CHANINFO syncronisieren Server, die das IRC+-
769 Protokoll unterstuetzen, Channel-Modes und Topics.
770 - neue Option "--disable-ircplus" fuer das configure-Script, um das
771 IRC+-Protokoll abzuschalten (per Default ist es aktiviert).
772 - Ban-Lists (setzen, erfragen und loeschen) implementiert.
773 - wird der Server mit "-n"/"--nodaemon" gestartet, so werden keine Mel-
774 dungen mehr ueber Syslog ausgegeben, sondern nur noch auf der Konsole.
775 - "Test-Suite" begonnen (in "make check" integriert): Dabei wird ein
776 speziell konfigurierter Server auf Port 6789 gestartet, mit dem dann
777 einige Tests durchgefuehrt werden (u.a. "Stress-Test" mit 50 Clients).
778 - zu lange Operator-Namen in der Konfiguration wurden falsch gekuerzt.
779 - kleine Anpassung an AIX 3.2.5: nun laeuft der ngIRCd auch dort :-)
780 - ADMIN-Befehl implementiert. Die Daten hierzu werden in der Konfig-Datei
781 im [Global]-Abschnitt mit den Variablen "AdminInfo1", "AdminInfo2" und
782 "AdminEMail" konfiguriert.
784 ngIRCd 0.4.3, 11.06.2002
786 - Bei PRIVMSG und NOTICE hat der ngIRCd nicht ueberpruft, ob das Ziel
787 ueberhaupt ein User ist. War es keiner, so fuehrte dies zu einem
788 Abbruch des Servers [es wurde assert() aufgerufen].
790 ngIRCd 0.4.2, 29.04.2002
792 - LUSERS verzaehlt sich bei eigenen Server-Links nicht mehr.
793 - QUIT wird nun auch von noch nicht registrierten Clients akzeptiert.
794 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
795 Wildcards (bis auf "*") unterstuetzt.
797 ngIRCd 0.4.1, 08.04.2002
799 - Bei Server-Links wird nicht mehr an Hand der Anzahl der Parameter
800 eines empfangenen SERVER-Befehls, sondern "intern" erkannt, ob es
801 sich um eine ein- oder ausgehende Verbindung handelt und somit das
802 eigene PASS-SERVER-Paar gesendet werden muss oder nicht. Da sich
803 verschiedene Versionen des Original-ircd's anders verhalten, schlug
804 die Anmeldung je nach Gehenseite evtl. fehl.
805 - Bei einem NICK-Befehl eines lokalen Client konnte der Server ab-
806 stuerzen, da ein Format-String einer Log-Meldung fehlerhaft war.
808 ngIRCd 0.4.0, 01.04.2002
810 - IRC-Befehle nochmal auf weitere Source-Dateien aufgespalten.
811 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
812 - Der AWAY-Mode wurde nicht ueber mehrere Server-Links weitergegeben.
813 - stderr wird nun in eine Datei umgelenkt (/tmp/ngircd-<PID>.err).
814 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
815 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
816 zusaetzliche Informationen.
817 - In Nicknames wird das Zeichen "-" nun als zulaessig erkannt.
818 - die Beispiel-Konfigurationsdatei (doc/sample-ngircd.conf) wird als
819 ngircd.conf installiert, wenn noch keine "echte" Konfigurationsdatei
821 - bei WHO, WHOIS und NAMES wird nun nur noch der Status "Operator" oder
822 "voiced" geliefert -- nicht mehr beides.
823 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
824 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
825 nicht, so wird der naechste probiert (Variable "Group" in der Kon-
826 figurationsdatei, Sektion [Server]).
827 - IRC_PING() ist, wenn nicht im "strict RFC"-Mode, toleranter und ak-
828 zeptiert beliebig viele Parameter (z.B. BitchX sendet soetwas).
829 - die "Portab-Header" werden nicht mehr benoetigt, die System-Erkennung
830 wird nun ausschliesslich vom configure-Script durchgefuehrt. System-
831 abhaengige Definitionen finden sich nun unter src/portrab/.
832 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
833 einen Hash-Wert gesucht: sollte deutlich schneller sein.
834 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
835 gelesen und dann die verwendeten Werte angezeigt.
836 - Client-Mode "s" (Server Notices) implementiert.
837 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
838 alternative Konfigurationsdatei angegeben werden.
839 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
840 zu einer anderen User-ID und Group-ID wechseln.
841 - URL der Homepage wird u.a. bei "--version" mit angezeigt.
843 ngIRCd 0.3.0, 02.03.2002
845 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
846 er auf den IRC-Befehl RESTART reagiert.
847 - FAQ um Hinweise auf den Bugtracker erweitert.
848 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
849 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
850 Zum Debuggen manchmal ganz praktisch :-)
851 - direkt nach dem Start schreibt der ngIRCd nun die aktiven Kommando-
852 zeilenschalter in's Logfile (Passive, Debug, Sniffer ...).
853 - das Signal-Flag SA_RESTART wird nur noch gesetzt, wenn es auf dem
854 jeweiligen System auch definiert ist.
855 - bei ausgehenden Verbindungen wird nun der Ziel-Port protokolliert.
856 - neue Befehle VERSION und KILL implementiert.
857 - make-Target "check" (und "distcheck") mit Sinn erfuellt :-)
858 (die Tests sind aber bisher nicht all zu tiefgehend ...)
859 - Durch einen Ueberlauf konnte die Idle-Time bei WHOIS negativ werden ...
860 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
861 - WHOIS wird nicht mehr automatisch an den "Original-Server" weiterge-
862 leitet: war eh nicht RFC-konform und machte mit Clients Probleme.
863 - an User wird nun immer ein "komplettes" Prefix (mit Host-Mask) ver-
864 schickt, Server bekommen nach wie vor kurze: das "Original" hat bei
865 bestimmten Befehlen (PRIVMSG) ansonsten evtl. Probleme ...
866 - NAMES korrigiert und vollstaendig implementiert.
867 - SQUIT wird auf jeden Fall geforwarded, zudem besseres Logging.
868 - Ist ein Nick bei der User-Registrierung bereits belegt, nimmt der
869 Server nun korrekt weitere NICK-Befehle an und verwendet diese.
870 - PRIVMSG beachtet nun die Channel-Modes "n" und "m".
871 - AWAY implementiert. PRIVMSG, MODE, USERHOST und WHOIS angepasst.
872 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
873 - ausgehende Server-Verbindungen werden nun asyncron connectiert und
874 blockieren nicht mehr den ganzen Server, wenn die Gegenseite nicht
875 erreicht werden kann (bis zum Timeout konnten Minuten vergehen!).
876 - Wert der Konfigurations-Variable "ConnectRetry" wird besser beachtet.
877 - Channel- und Nicknames werden nun ordentlich validiert.
879 ngIRCd 0.2.1, 17.02.2002
881 - NICK korrigiert: es werden nun auch alle "betroffenen" User informiert.
882 - configure-Script erweitert, u.a. bessere Anpassung an BeOS: dort wird
883 nun die "libbe" zum ngIRCd gelinkt, somit funktioniert auch syslog.
884 - Fehlerhafte bzw. noch nicht verstandene Modes werden nun ausfuehrlicher
885 an den Client geliefert.
887 ngIRCd 0.2.0, 15.02.2002
889 - Nicknames und Channel-Namen werden etwas besser auf Gueltigkeit ueber-
890 prueft; ist aber nach wie vor noch nicht ausreichend.
891 - NJOINS von Servern wurden nicht an andere Server weitergeleitet.
892 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
893 Server versteht an User-Modes o und v, beachtet letzteres allerdings
894 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
895 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
896 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
897 - Benutzer von connectierenden Servern wurden nicht in den Channels ange-
898 kuendigt, es wurden nur die internen Strukturen angepasst.
899 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
901 ngIRCd 0.1.0, 29.01.2002
903 - User-Modes bei User-Registrierungen von andere Servern (NICK-Befehl)
904 wurden falsch uebernommen. Zudem wurden die Modes falsch gekuerzt.
905 - Server-Verbindungen werden nun nach dem Start erst nach einer kurzen
906 Pause aufgebaut (zur Zeit drei Sekunden).
907 - Hilfetext korrigiert: --help und --version waren vertauscht, die
908 Option --sniffer wurde gar nicht erwaehnt.
909 - FAQ.txt in doc/ begonnen.
910 - der IRC-Sniffer wird nur noch aktiviert, wenn die Option auf der
911 Kommandozeile angegeben wurde (bei entsprechend compiliertem Server).
912 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
913 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
914 Chatten in Channels ist aber natuerlich moeglich ;-)
915 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
916 - durch die Channels einige Aenderungen an PRIVMSG, WHOIS, MODE etc.
917 - neu connectierenden Servern werden nun Channels mit NJOIN angekuendigt.
918 - Signal-Hander geaendert: die Fehlermeldung "interrupted system call"
919 sollte so nicht mehr auftreten.
920 - "spaeter" neu connectierende Server werden nun im Netz angekuendigt.
921 - SERVER-Meldungen an andere Server sind nun korrekt sortiert.
922 - Clients werden nun korrekt sowohl nur ueber den Nickname als auch die
923 komplette "Host Mask" erkannt.
925 ngIRCd 0.0.3, 16.01.2002
927 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
928 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
929 IRC-Netzwerk arbeiten.
930 - MODE und NICK melden nun die Aenderungen an andere Server, ebenso
931 die Befehle QUIT und SQUIT.
932 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
933 - Parses handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
934 - Status-Codes an den Server selber werden ignorier.
935 - Log-Meldungen und Log-Level ueberarbeitet und korrigiert.
936 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
937 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
938 - WHOIS korrigiert: Anfrage wurde u.U. an User geforwarded anstatt vom
939 Server beantwortet zu werden.
940 - neue Befehle: LUSERS, LINKS
941 - Client-Modes von Remote-Servern wurden nicht korrekt uerbernommen.
943 ngIRCd 0.0.2, 06.01.2002
945 - Struktur der Konfigurationsdatei geaendert: sie ist nun "Samba like",
946 d.h. sie besteht aus Abschnitten (siehe "doc/sample-ngircd.conf").
947 - Es koennen mehrere IRC-Server-Opertatoren konfiguriert werden.
948 - Zombies der Resolver-Prozesse werden nun ordentlich "getoetet".
949 - NICK kann nun die Gross- und Kleinschreibung eines Nicks aendern.
950 - ein Server-Passwort ist nun konfigurierbar.
951 - neue Befehle: ERROR, SERVER, NJOIN (nur als "Fake"), SQUIT.
952 - Asyncroner Resolver Hostname->IP implementiert.
953 - Server-Links teilweise implementiert: bisher kann der ngIRCd jedoch
954 nur "leafed server" sein, d.h. keine "Client-Server" haben. Einige
955 Befehle sind auch noch nicht (optimal) angepasst: PRIVMSG funktioniert
956 aber bereits, ebenso wie WHOIS (letzterer wird immer an den Server,
957 auf dem der User registriert ist, weitergegeben).
958 - "arpa/inet.h" wird nur noch includiert, wenn vorhanden.
959 - Fehler bei select() fuerhen nun zum Abbruch von ngIRCd, bisher landete
960 der Server zumeist in einer Endlosschleife.
961 - Logmeldungen und Level an vielen Stellen verbessert.
962 - lokalen Usernamen wird nun ein "~" vorangestellt, da bisher noch keine
963 Ident-Anfragen gemacht werden.
965 ngIRCd 0.0.1, 31.12.2001
967 - erste oeffentliche Version von ngIRCd als "public preview" :-)