# Empty lines and lines beginning with `#' are ignored.
# Options in this file will override both compiled-in defaults
# and command line options.
+#
+
+
#
# Format:
# - [options] to specify options for the default server
# "Server name" [options] to specify an additional server
+#
+
+
#
# The following options are available:
# Transport Protocols:
# specify a value that is out of range, you'll get
# the default value (currently the minimum).
# -admingroup <groupname>
-# Specifies the group of administrators who should all
-# be seen as the superuser when they log in. Default
-# is disabled.
-# -ddpaddr x.y Specifies the DDP address of the server. the
-# default is to auto-assign an address
-# (0.0). this is only useful if you're running
-# on a multihomed host.
+# Specifies the group of administrators who should
+# all be seen as the superuser when they log in.
+# Default is disabled.
+# -ddpaddr x.y Specifies the DDP address of the server.
+# the default is to auto-assign an address (0.0).
+# this is only useful if you're running on
+# a multihomed host.
# -port <number> Specifies the TCP port the server should respond
# to (default is 548)
-# -fqdn <name:port> specify a fully-qualified domain name (+
-# optional port). this gets discarded if the
-# server can't resolve it. this is not honored
-# by appleshare clients <= 3.8.3 (default: none)
-# -proxy Run an AppleTalk proxy server for specified AFP/TCP
-# server (if address/port aren't given, then
-# first IP address of the system/548 will be used).
+# -fqdn <name:port> specify a fully-qualified domain name (+optional
+# port). this gets discarded if the server can't
+# resolve it. this is not honored by appleshare
+# clients <= 3.8.3 (default: none)
+# -proxy Run an AppleTalk proxy server for specified
+# AFP/TCP server (if address/port aren't given,
+# then first IP address of the system/548 will
+# be used).
# if you don't want the proxy server to act as
-# a ddp server as well, set -uamlist to an
-# empty string.
-# -slp Register this server with the Service
-# Location Protocol.
+# a ddp server as well, set -uamlist to an empty
+# string.
+# -slp Register this server with the Service Location
+# Protocol.
#
#
# Authentication Methods:
# -uampath <path> Use this path to look for User Authentication Modules.
-# (default: :UAMS_PATH:)
-# -uamlist <a,b,c> Comma-separated list of UAMs. (default:
-# uams_dhx.so,uams_dhx2.so)
+# (default: :UAMS_PATH:)
+# -uamlist <a,b,c> Comma-separated list of UAMs.
+# (default: uams_dhx.so,uams_dhx2.so)
#
-# some commonly available UAMs:
+# some commonly available UAMs:
# uams_guest.so: Allow guest logins
#
-# uams_clrtxt.so: (uams_pam.so or uams_passwd.so)
-# Allow logins with passwords
-# transmitted in the clear.
+# uams_clrtxt.so: (uams_pam.so or uams_passwd.so)
+# Allow logins with passwords
+# transmitted in the clear.
#
-# uams_randnum.so: Allow Random Number and Two-Way
-# Random Number exchange for
-# authentication.
+# uams_randnum.so: Allow Random Number and Two-Way
+# Random Number exchange for
+# authentication.
#
-# uams_dhx.so: (uams_dhx_pam.so or uams_dhx_passwd.so)
-# Allow Diffie-Hellman eXchange
-# (DHX) for authentication.
+# uams_dhx.so: (uams_dhx_pam.so or uams_dhx_passwd.so)
+# Allow Diffie-Hellman eXchange
+# (DHX) for authentication.
#
-# uams_dhx2.so: (uams_dhx2_pam.so or uams_dhx2_passwd.so)
-# Allow Diffie-Hellman eXchange 2
-# (DHX2) for authentication.
+# uams_dhx2.so: (uams_dhx2_pam.so or uams_dhx2_passwd.so)
+# Allow Diffie-Hellman eXchange 2
+# (DHX2) for authentication.
#
# Password Options:
# -[no]savepassword [Don't] Allow clients to save password locally
-# -passwdfile <path> Use this path to store Randnum
-# passwords. (Default: :ETCDIR:/afppasswd. The only
-# other useful value is ~/.passwd. See 'man afppasswd'
+# -passwdfile <path> Use this path to store Randnum passwords.
+# (Default: :ETCDIR:/afppasswd. The only other
+# useful value is ~/.passwd. See 'man afppasswd'
# for details.)
# -passwdminlen <#> minimum password length. may be ignored.
# -[no]setpassword [Don't] Allow clients to change their passwords.
# -loginmaxfail <#> maximum number of failed logins. this may be
-# ignored if the uam can't handle it.
+# ignored if the uam can't handle it.
#
# AppleVolumes files:
# -defaultvol <path> Specifies path to AppleVolumes.default file
# :ETCDIR:/AppleVolumes.default
# (same as -u on command line)
# -[no]uservol [Don't] Read the user's volume file
-# -closevol Immediately unmount volumes removed from AppleVolumes
-# files on SIGHUP sent to the afp master process.
+# -closevol Immediately unmount volumes removed from
+# AppleVolumes files on SIGHUP sent to the afp
+# master process.
#
# Miscellaneous:
# -authprintdir <path> Specifies the path to be used (per server) to
-# store the files required to do CAP-style
-# print authentication which papd will examine
-# to determine if a print job should be allowed.
-# These files are created at login and if they
-# are to be properly removed, this directory
-# probably needs to be umode 1777
+# store the files required to do CAP-style
+# print authentication which papd will examine
+# to determine if a print job should be allowed.
+# These files are created at login and if they
+# are to be properly removed, this directory
+# probably needs to be umode 1777
# -guestname "user" Specifies the user name for the guest login
# (default "nobody", same as -g on command line)
# -loginmesg "Message" Client will display "Message" upon logging in
# shouldn't be changed. If you want to control
# the server idle timeout, use the -timeout option.
# -timeout <number> Specify the number of tickles to send before
-# timing out a connection. The default is 4, therefore
-# a connection will timeout in 2 minutes.
+# timing out a connection.
+# The default is 4, therefore a connection will
+# timeout in 2 minutes.
# -icon Use the platform-specific icon.
# -volnamelen <number>
# Max length of UTF8-MAC volume name for Mac OS X.
# Mac OS 9 and earlier is not influenced by this,
# Maccharset volume names are always limitted to 27.
# -[un]setuplog "<logtype> <loglevel> [<filename>]"
-# Specify that any message of a loglevel up to the given loglevel
-# should be logged to the given file. If the filename is ommited the
-# loglevel applies to messages passed to syslog.
-#
-# By default (no explicit -setuplog and no buildtime configure flag
-# --with-logfile) afpd logs to syslog with a default
-# logging setup equivalent to "-setuplog default log_info".
-#
-# If build with --with-logfile[=somefile] (default logfile
-# /var/log/netatalk.log) afpd defaults to a setup that is equivalent
-# to "-setuplog default log_info [netatalk.log|somefile]"
+# Specify that any message of a loglevel up to the
+# given loglevel should be logged to the given file.
+# If the filename is ommited the loglevel applies to
+# messages passed to syslog.
+#
+# By default (no explicit -setuplog and no buildtime
+# configure flag --with-logfile) afpd logs to syslog
+# with a default logging setup equivalent to
+# "-setuplog default log_info".
+#
+# If build with --with-logfile[=somefile]
+# (default logfile /var/log/netatalk.log) afpd
+# defaults to a setup that is equivalent to
+# "-setuplog default log_info [netatalk.log|somefile]"
#
# logtypes: Default, AFPDaemon, Logger, UAMSDaemon
-# loglevels: LOG_SEVERE, LOG_ERROR, LOG_WARN, LOG_NOTE, LOG_INFO, LOG_DEBUG,
-# LOG_DEBUG6, LOG_DEBUG7, LOG_DEBUG8, LOG_DEBUG9, LOG_MAXDEBUG
+# loglevels: LOG_SEVERE, LOG_ERROR, LOG_WARN,
+# LOG_NOTE, LOG_INFO, LOG_DEBUG,
+# LOG_DEBUG6, LOG_DEBUG7, LOG_DEBUG8,
+# LOG_DEBUG9, LOG_MAXDEBUG
#
# Example: Useful default config
# -setuplog "default log_info /var/log/afpd.log"
# -setuplog "default log_maxdebug /var/log/afpd.log"
#
# -signature { user:<text> | auto }
-# Specify a server signature. This option is useful while
-# running multiple independent instances of afpd on one
-# machine (eg. in clustered environments, to provide fault
-# isolation etc.).
+# Specify a server signature. This option is useful
+# while running multiple independent instances of
+# afpd on one machine (eg. in clustered environments,
+# to provide fault isolation etc.).
# Default is "auto".
-# "auto" signature type allows afpd generating signature and
-# saving it to afp_signature.conf automatically (based on random number).
-# "host" signature type is obsoleted. (switch back to auto)
-# "user" signature type allows administrator to set up a signature
-# string manually. Examples: three servers running on one machine:
+# "auto" signature type allows afpd generating
+# signature and saving it to afp_signature.conf
+# automatically (based on random number).
+# "host" signature type switches back to "auto"
+# because it is obsoleted.
+# "user" signature type allows administrator to
+# set up a signature string manually.
+# Examples: three servers running on one machine:
# first -signature user:USERS
# second -signature user:USERS
# third -signature user:ADMINS
-# First two servers will act as one logical AFP service - if user logs in to
-# first one and then connects to second one, session will be automatically
-# redirected to the first one. But if client connects to first and then to third,
-# will be asked for password twice and will see resources of both servers.
-# Traditional method of signature generation causes two independent afpd instances
-# to have the same signature and thus cause clients to be redirected automatically
-# to server (s)he logged in first.
+# First two servers will act as one logical AFP service.
+# If user logs in to first one and then connects to second
+# one, session will be automatically redirected to the first
+# one. But if client connects to first and then to third,
+# will be asked for password twice and will see resources of
+# both servers.
+# Traditional method of signature generation causes two
+# independent afpd instances to have the same signature and
+# thus cause clients to be redirected automatically to
+# server (s)he logged in first.
# -k5service <service>
# -k5realm <realm>
-# These are required if the server supports Kerberos 5 authentication
+# These are required if the server supports Kerberos 5
+# authentication
#
# Codepage Options:
-# -unixcodepage <CODEPAGE> Specifies the servers unix codepage, e.g. "ISO-8859-15" or "UTF8".
-# This is used to convert strings to/from the systems locale, e.g.
-# for authenthication. Defaults to LOCALE if your system supports it,
-# otherwise ASCII will be used.
+# -unixcodepage <CODEPAGE> Specifies the servers unix codepage,
+# e.g. "ISO-8859-15" or "UTF8".
+# This is used to convert strings to/from
+# the systems locale, e.g. for authenthication.
+# Defaults to LOCALE if your system supports it,
+# otherwise ASCII will be used.
#
-# -maccodepage <CODEPAGE> Specifies the mac clients codepage, e.g. "MAC_ROMAN".
-# This is used to convert strings to the systems locale, e.g.
-# for authenthication and SIGUSR2 messaging. This will also be
-# the default for volumes maccharset.
+# -maccodepage <CODEPAGE> Specifies the mac clients codepage,
+# e.g. "MAC_ROMAN".
+# This is used to convert strings to the
+# systems locale, e.g. for authenthication
+# and SIGUSR2 messaging. This will also be
+# the default for volumes maccharset.
#
# CNID related options:
-# -cnidserver ipaddress:port Specifies the IP address and port of a cnid_metad server.
+# -cnidserver ipaddress:port Specifies the IP address and port of
+# a cnid_metad server.
#
-
-#
+
+#
# Some examples:
#
-# The simplest case is to not have an afpd.conf.
+# The simplest case is to not have an afpd.conf.
#
-# 4 servers w/ names server1-3 and one w/ the hostname. servers
+# 4 servers w/ names server1-3 and one w/ the hostname. servers
# 1-3 get routed to different ports with server 3 being bound
# specifically to address 192.168.1.3
-# -
-# server1 -port 12000
-# server2 -port 12001
-# server3 -port 12002 -ipaddr 192.168.1.3
+# -
+# server1 -port 12000
+# server2 -port 12001
+# server3 -port 12002 -ipaddr 192.168.1.3
#
-# a dedicated guest server, a user server, and a special
-# ddp-only server:
-# "Guest Volume" -uamlist uams_guest.so -loginmesg "Welcome guest!"
-# "User Volume" -uamlist uams_clrtxt.so -port 12000
-#
"special" -notcp -defaultvol <path> -systemvol <path>
+# a dedicated guest server, a user server, and a special
+# ddp-only server:
+# "Guest Volume" -uamlist uams_guest.so -loginmesg "Welcome guest!"
+# "User Volume" -uamlist uams_clrtxt.so -port 12000
+# "special" -notcp -defaultvol <path> -systemvol <path>
#
+
# default:
# - -tcp -noddp -uamlist uams_dhx.so,uams_dhx2.so -nosavepassword
projects / netatalk.git / commitdiff