import sys
import os
import socket
+import select
try:
- # from urllib.request import urlopen, Request, HTTPPasswordMgrWithDefaultRealm
import urllib.request as urllib2
except ImportError:
- # from urllib2 import urlopen, Request, HTTPPasswordMgrWithDefaultRealm
import urllib2
-# from subprocess import STDOUT, PIPE, Popen
+from subprocess import Popen, PIPE
+
import threading
import msg
:param config: dict
"""
try:
- self.override_name = config.pop('override_name')
+ self.override_name = config.pop('name')
except KeyError:
pass
self.update_every = int(config.pop('update_every'))
t_start = time.time()
# check if it is time to execute job update() function
if self.timetable['next'] > t_start:
- msg.debug(self.chart_name + " will be run in " +
- str(int((self.timetable['next'] - t_start) * 1000)) + " ms")
+ #msg.debug(self.chart_name + " will be run in " +
+ # str(int((self.timetable['next'] - t_start) * 1000)) + " ms")
+ msg.debug(self.chart_name, "will be run in", str(int((self.timetable['next'] - t_start) * 1000)), "ms")
return True
since_last = int((t_start - self.timetable['last']) * 1000000)
- msg.debug(self.chart_name +
- " ready to run, after " + str(int((t_start - self.timetable['last']) * 1000)) +
- " ms (update_every: " + str(self.timetable['freq'] * 1000) +
- " ms, latency: " + str(int((t_start - self.timetable['next']) * 1000)) + " ms)")
+ #msg.debug(self.chart_name +
+ # " ready to run, after " + str(int((t_start - self.timetable['last']) * 1000)) +
+ # " ms (update_every: " + str(self.timetable['freq'] * 1000) +
+ # " ms, latency: " + str(int((t_start - self.timetable['next']) * 1000)) + " ms)")
+ msg.debug(self.chart_name,
+ "ready to run, after", str(int((t_start - self.timetable['last']) * 1000)),
+ "ms (update_every:", str(self.timetable['freq'] * 1000),
+ "ms, latency:", str(int((t_start - self.timetable['next']) * 1000)), "ms")
if not self.update(since_last):
+ self.error("update function failed.")
return False
t_end = time.time()
self.timetable['next'] = t_end - (t_end % self.timetable['freq']) + self.timetable['freq']
-
# draw performance graph
run_time = str(int((t_end - t_start) * 1000))
- run_time_chart = "BEGIN netdata.plugin_pythond_" + self.chart_name + " " + str(since_last) + '\n'
- run_time_chart += "SET run_time = " + run_time + '\n'
- run_time_chart += "END\n"
- sys.stdout.write(run_time_chart)
- msg.debug(self.chart_name + " updated in " + str(run_time) + " ms")
+ #run_time_chart = "BEGIN netdata.plugin_pythond_" + self.chart_name + " " + str(since_last) + '\n'
+ #run_time_chart += "SET run_time = " + run_time + '\n'
+ #run_time_chart += "END\n"
+ #sys.stdout.write(run_time_chart)
+ sys.stdout.write("BEGIN netdata.plugin_pythond_%s %s\nSET run_time = %s\nEND\n" % \
+ (self.chart_name, str(since_last), run_time))
+
+ #msg.debug(self.chart_name + " updated in " + str(run_time) + " ms")
+ msg.debug(self.chart_name, "updated in", str(run_time), "ms")
self.timetable['last'] = t_start
return True
try:
status = self._run_once()
except Exception as e:
- msg.error("Something wrong: " + str(e))
+ msg.error("Something wrong: ", str(e))
return
if status:
time.sleep(self.timetable['next'] - time.time())
else:
time.sleep(self.timetable['freq'])
+ @staticmethod
+ def _format(*args):
+ params = []
+ append = params.append
+ for p in args:
+ if p is None:
+ append(p)
+ continue
+ if type(p) is not str:
+ p = str(p)
+ if ' ' in p:
+ p = "'" + p + "'"
+ append(p)
+ return params
+
def _line(self, instruction, *params):
"""
Converts *params to string and joins them with one space between every one.
:param params: str/int/float
"""
- self._data_stream += instruction
- for p in params:
- if p is None:
- p = ""
- else:
- p = str(p)
- if len(p) == 0:
- p = "''"
- if ' ' in p:
- p = "'" + p + "'"
- self._data_stream += " " + p
- self._data_stream += "\n"
+ #self._data_stream += instruction
+ tmp = list(map((lambda x: "''" if x is None or len(x) == 0 else x), params))
+
+ self._data_stream += "%s %s\n" % (instruction, str(" ".join(tmp)))
+
+ # self.error(str(" ".join(tmp)))
+ # for p in params:
+ # if p is None:
+ # p = ""
+ # else:
+ # p = str(p)
+ # if len(p) == 0:
+ # p = "''"
+ # if ' ' in p:
+ # p = "'" + p + "'"
+ # self._data_stream += " " + p
+ #self._data_stream += "\n"
def chart(self, type_id, name="", title="", units="", family="",
category="", charttype="line", priority="", update_every=""):
:param update_every: int/str
"""
self._charts.append(type_id)
- self._line("CHART", type_id, name, title, units, family, category, charttype, priority, update_every)
+ #self._line("CHART", type_id, name, title, units, family, category, charttype, priority, update_every)
+
+ p = self._format(type_id, name, title, units, family, category, charttype, priority, update_every)
+ self._line("CHART", *p)
def dimension(self, id, name=None, algorithm="absolute", multiplier=1, divisor=1, hidden=False):
"""
if algorithm not in ("absolute", "incremental", "percentage-of-absolute-row", "percentage-of-incremental-row"):
algorithm = "absolute"
- self._dimensions.append(id)
+ self._dimensions.append(str(id))
if hidden:
- self._line("DIMENSION", id, name, algorithm, multiplier, divisor, "hidden")
+ p = self._format(id, name, algorithm, multiplier, divisor, "hidden")
+ #self._line("DIMENSION", id, name, algorithm, str(multiplier), str(divisor), "hidden")
else:
- self._line("DIMENSION", id, name, algorithm, multiplier, divisor)
+ p = self._format(id, name, algorithm, multiplier, divisor)
+ #self._line("DIMENSION", id, name, algorithm, str(multiplier), str(divisor))
+
+ self._line("DIMENSION", *p)
def begin(self, type_id, microseconds=0):
"""
self.error("malformed begin statement: microseconds are not a number:", microseconds)
microseconds = ""
- self._line("BEGIN", type_id, microseconds)
+ self._line("BEGIN", type_id, str(microseconds))
return True
def set(self, id, value):
:return: boolean
"""
if id not in self._dimensions:
- self.error("wrong dimension id:", id)
+ self.error("wrong dimension id:", id, "Available dimensions are:", *self._dimensions)
return False
try:
value = str(int(value))
except TypeError:
self.error("cannot set non-numeric value:", value)
return False
- self._line("SET", id, "=", value)
+ self._line("SET", id, "=", str(value))
return True
def end(self):
idx = 0
for name in self.order:
options = self.definitions[name]['options'] + [self.priority + idx, self.update_every]
- self.chart(self.__module__ + "_" + self.name + "." + name, *options)
+ self.chart(self.chart_name + "." + name, *options)
# check if server has this datapoint
for line in self.definitions[name]['lines']:
if line[0] in data:
"""
data = self._get_data()
if data is None:
+ self.debug("_get_data() returned no data")
return False
updated = False
for chart in self.order:
- if self.begin(self.__module__ + "_" + str(self.name) + "." + chart, interval):
+ if self.begin(self.chart_name + "." + chart, interval):
updated = True
for dim in self.definitions[chart]['lines']:
try:
self.end()
self.commit()
+ if not updated:
+ self.error("no charts to update")
return updated
try:
f = urllib2.urlopen(self.url, timeout=self.update_every)
except Exception as e:
- msg.error(self.__module__, str(e))
+ self.error(str(e))
return None
try:
raw = f.read().decode('utf-8')
except Exception as e:
- msg.error(self.__module__, str(e))
+ self.error(str(e))
finally:
f.close()
return raw
"""
if self.name is None or self.name == str(None):
self.name = 'local'
+ self.chart_name += "_" + self.name
else:
self.name = str(self.name)
try:
except (KeyError, TypeError):
pass
try:
- self.password = str(self.configuration['password'])
+ self.password = str(self.configuration['pass'])
except (KeyError, TypeError):
pass
return False
-class NetSocketService(SimpleService):
+class SocketService(SimpleService):
def __init__(self, configuration=None, name=None):
+ self._sock = None
+ self._keep_alive = True
self.host = "localhost"
self.port = None
- self.sock = None
+ self.unix_socket = None
self.request = ""
+ self.__socket_config = None
SimpleService.__init__(self, configuration=configuration, name=name)
- def _get_raw_data(self):
+ def _connect(self):
"""
- Get raw data with low-level "socket" module.
- :return: str
+ Recreate socket and connect to it since they cannot be reused
+ Available configurations are IPv6, IPv4 or UNIX socket
+ :return:
"""
- if self.sock is None:
- try:
- sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- sock.settimeout(self.update_every)
- sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
- sock.connect((self.host, self.port))
- except Exception as e:
- self.sock = None
- return None
+ try:
+ if self.unix_socket is None:
+ if self.__socket_config is None:
+ # establish ipv6 or ipv4 connection.
+ for res in socket.getaddrinfo(self.host, self.port, socket.AF_UNSPEC, socket.SOCK_STREAM):
+ try:
+ af, socktype, proto, canonname, sa = res
+ self._sock = socket.socket(af, socktype, proto)
+ except socket.error as msg:
+ self._sock = None
+ continue
+ try:
+ self._sock.connect(sa)
+ except socket.error as msg:
+ self._disconnect()
+ continue
+ self.__socket_config = res
+ break
+ else:
+ # connect to socket with previously established configuration
+ try:
+ af, socktype, proto, canonname, sa = self.__socket_config
+ self._sock = socket.socket(af, socktype, proto)
+ self._sock.connect(sa)
+ except socket.error as msg:
+ self._disconnect()
+ else:
+ # connect to unix socket
+ self._sock = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
+ self._sock.connect(self.unix_socket)
+ except Exception as e:
+ self.error(str(e),
+ "Cannot create socket with following configuration: host:", str(self.host),
+ "port:", str(self.port),
+ "socket:", str(self.unix_socket))
+ self._sock = None
+ self._sock.setblocking(0)
+ def _disconnect(self):
+ """
+ Close socket connection
+ :return:
+ """
try:
- sock.send(self.request)
+ self._sock.shutdown(2) # 0 - read, 1 - write, 2 - all
+ self._sock.close()
except Exception:
+ pass
+ self._sock = None
+
+ def _send(self):
+ """
+ Send request.
+ :return: boolean
+ """
+ # Send request if it is needed
+ if self.request != "".encode():
try:
- sock.shutdown(1)
- sock.close()
- except:
- pass
- self.sock = None
- return None
+ self._sock.send(self.request)
+ except Exception as e:
+ self._disconnect()
+ self.error(str(e),
+ "used configuration: host:", str(self.host),
+ "port:", str(self.port),
+ "socket:", str(self.unix_socket))
+ return False
+ return True
- data = sock.recv(1024)
- try:
- while True:
- buf = sock.recv(1024)
- if not buf:
+ def _receive(self):
+ """
+ Receive data from socket
+ :return: str
+ """
+ data = ""
+ while True:
+ try:
+ ready_to_read, _, in_error = select.select([self._sock], [], [], 0.01)
+ except Exception as e:
+ self.debug("SELECT", str(e))
+ self._disconnect()
+ break
+ if len(ready_to_read) > 0:
+ buf = self._sock.recv(4096)
+ if len(buf) == 0 or buf is None:
break
- else:
- data += buf
- except:
- sock.close()
+ data += buf.decode()
+ else:
+ self._disconnect()
+ break
+
+ return data
+
+ def _get_raw_data(self):
+ """
+ Get raw data with low-level "socket" module.
+ :return: str
+ """
+ if self._sock is None:
+ self._connect()
+
+ # Send request if it is needed
+ if not self._send():
return None
- return data.decode()
+ finished = False
+ data = ""
+ prevent_infinite_loop = 1000000
+ while not finished:
+ data += self._receive()
+ finished = self._check_raw_data(data)
+ prevent_infinite_loop -= 1
+ if prevent_infinite_loop <= 0:
+ self.debug("Almost got into infinite loop while grabbing data. Is _check_raw_data() ok?")
+ break
+
+ if not self._keep_alive:
+ self._disconnect()
+
+ return data
+
+ def _check_raw_data(self, data):
+ """
+ Check if all data has been gathered from socket
+ :param data: str
+ :return: boolean
+ """
+ return True
def _parse_config(self):
"""
Parse configuration data
:return: boolean
"""
- if self.name is not None or self.name != str(None):
+ if self.name is None or self.name == str(None):
self.name = ""
else:
self.name = str(self.name)
try:
- self.host = str(self.configuration['host'])
- except (KeyError, TypeError):
- self.error("No host specified. Using: '" + self.host + "'")
- try:
- self.port = int(self.configuration['port'])
+ self.unix_socket = str(self.configuration['socket'])
except (KeyError, TypeError):
- self.error("No port specified. Using: '" + str(self.port) + "'")
+ self.debug("No unix socket specified. Trying TCP/IP socket.")
+ try:
+ self.host = str(self.configuration['host'])
+ except (KeyError, TypeError):
+ self.debug("No host specified. Using: '" + self.host + "'")
+ try:
+ self.port = int(self.configuration['port'])
+ except (KeyError, TypeError):
+ self.debug("No port specified. Using: '" + str(self.port) + "'")
try:
- self.port = int(self.configuration['request'])
+ self.request = str(self.configuration['request'])
except (KeyError, TypeError):
- self.error("No request specified. Using: '" + str(self.request) + "'")
+ self.debug("No request specified. Using: '" + str(self.request) + "'")
self.request = self.request.encode()
if os.path.getsize(self.log_path) < self._last_position:
self._last_position = 0
elif os.path.getsize(self.log_path) == self._last_position:
+ self.debug("Log file hasn't changed. No new data.")
return None
with open(self.log_path, "r") as fp:
fp.seek(self._last_position)
lines.append(line)
self._last_position = fp.tell()
except Exception as e:
- msg.error(self.__module__, str(e))
+ self.error(str(e))
if len(lines) != 0:
return lines
- return None
+ else:
+ self.error("No data collected.")
+ return None
def check(self):
"""
self._last_position = 0
return status
+
+class ExecutableService(SimpleService):
+ #command_whitelist = ['exim', 'postqueue']
+ bad_substrings = ('&', '|', ';', '>', '<')
+
+ def __init__(self, configuration=None, name=None):
+ self.command = ""
+ SimpleService.__init__(self, configuration=configuration, name=name)
+
+ def _get_raw_data(self):
+ """
+ Get raw data from executed command
+ :return: str
+ """
+ try:
+ p = Popen(self.command, stdout=PIPE, stderr=PIPE)
+ except Exception as e:
+ self.error("Executing command", self.command, "resulted in error:", str(e))
+ return None
+ data = []
+ for line in p.stdout.readlines():
+ data.append(str(line.decode()))
+
+ if len(data) == 0:
+ self.error("No data collected.")
+ return None
+
+ return data
+
+ def check(self):
+ """
+ Parse basic configuration, check if command is whitelisted and is returning values
+ :return: boolean
+ """
+ if self.name is not None or self.name != str(None):
+ self.name = ""
+ else:
+ self.name = str(self.name)
+ try:
+ self.command = str(self.configuration['command'])
+ except (KeyError, TypeError):
+ self.error("No command specified. Using: '" + self.command + "'")
+ self.command = self.command.split(' ')
+ #if self.command[0] not in self.command_whitelist:
+ # self.error("Command is not whitelisted.")
+ # return False
+
+ for arg in self.command[1:]:
+ if any(st in arg for st in self.bad_substrings):
+ self.error("Bad command argument:" + " ".join(self.command[1:]))
+ return False
+ # test command and search for it in /usr/sbin or /sbin when failed
+ base = self.command[0].split('/')[-1]
+ if self._get_raw_data() is None:
+ for prefix in ['/sbin/', '/usr/sbin/']:
+ self.command[0] = prefix + base
+ if os.path.isfile(self.command[0]):
+ break
+ #if self._get_raw_data() is not None:
+ # break
+
+ if self._get_data() is None or len(self._get_data()) == 0:
+ self.error("Command", self.command, "returned no data")
+ return False
+ return True
projects / netdata.git / blobdiff