Please note:
The RFCs state that the <token> parameter is used to specify the
- origin of the PING command when forwared in the network, but this
+ origin of the PING command when forwarded in the network, but this
is not the case: the sender is specified using the prefix as usual,
and the parameter is used to identify the PONG reply in practice.
modes are returned. Otherwise the modes are adjusted accordingly
and the changes will be reported back to the client.
.
- All user and chnnel "modes" are indicated by single case-sensitive
+ All user and channel "modes" are indicated by single case-sensitive
characters.
.
Please note that a user can only get and set his own modes, and not
Show statistics and other information of type <query> of a particular
IRC server in the network.
.
- The following <query> types are supported (case-insensitive):
+ The following <query> types are supported (case-insensitive where
+ applicable):
.
- g Network-wide bans ("G-Lines").
- k Server-local bans ("K-Lines").
- - l Link status (parent server and own link only).
+ - L Link status (servers and user links).
+ - l Link status (servers and own link).
- m Command usage count.
- u Server uptime.
.
<target> can be a server name, the nickname of a client connected to
a specific server, or a mask matching a server name in the network.
The server of the current connection is used when <target> is omitted.
+ .
+ To use "STATS L" the user must be an IRC Operator.
References:
- RFC 2812, 3.4.4 "Stats message"
- LIST
LIST [<channel>[,<channel>[,...]] [<server>]]
.
- List all visible <channels> (comma-seperated list).
+ List all visible <channels> (comma-separated list).
.
If <server> is given, the command will be forwarded to <server> for
evaluation.
- TOPIC
TOPIC <channel> [<topic>]
.
- Cchange or view the topic of a channel.
+ Change or view the topic of a channel.
.
The topic for channel <channel> is returned if there is no <topic>
given. If the <topic> parameter is present, the topic for that
~~~~~~~~~~~~~~~~~~~~~~~
- CONNECT
- CONNECT <target server> [<port> [<remote server> [<mypwd> <peerpwd>]]]
+ CONNECT <server> [<port> [<remote-server> [<my-pwd> <peer-pwd>]]]
+ .
+ Instructs the current server, or <remote-server> if specified,
+ to connect to the server named <server>, which must be configured
+ in the server configuration file.
.
- Instructs the current server, or <remote server> if specified,
- to connect to <target server>.
+ To use this command, the user must be an IRC Operator. To establish
+ a connection on a <remote-server>, you must have remote IRC operator
+ privileges.
.
- To connect <remote server> you need to have remote oper status.
- If <port> is omitted, it uses the server port of the configuration.
- If <mypwd> and <peerpwd> is given, it uses those passwords instead
- of the ones in the configuration.
+ If <port>, <my-pwd> and <peer-pwd> are given, these values override
+ the ones specified in the server configuration file.
+
+ References:
+ - RFC 2812, 3.4.7 "Connect message"
- DIE
- DIE
+ DIE [<message>]
.
Instructs the server to shut down.
+ .
+ The optional (and non-standard) <message> text is sent to each client
+ connected to this server before all connections are closed.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.3 "Die message"
- DISCONNECT
- DISCONNECT [<remote server>]
+ DISCONNECT <server>
+ .
+ Disconnect and disable a locally linked server.
.
- Disconnects the current server, or <remote server> if specified.
- To disconnect a <remote server> you need to have remote oper status.
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- GLINE
- GLINE <nick!user@hostmask> <seconds> :<reason>
+ GLINE <nick!user@hostmask> [<timeout> :<reason>]
+ .
+ This command provides timed G-Lines (network-wide bans).
.
- This command provides timed G-Lines (Network-wide bans).
If a client matches a G-Line, it cannot connect to any server on
- the IRC network. If you put 0 as <seconds>, it makes the G-Line
- permanent.
+ the IRC network for <timeout> seconds. When <timeout> is 0, it make
+ the G-Line permanent.
+ .
+ If no <timeout> and no <reason> is given, the G-Line is removed.
+ .
+ To use this command, the user must be an IRC Operator.
.
- To remove a G-Line, type "GLINE <nick!user@hostmask>".
- To list the G-Lines, type "STATS g".
+ "STATS g" can be used to list all currently active G-Lines.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- KILL
KILL <nickname> <reason>
.
This command is used internally between servers, too, for example
to disconnect duplicate <nickname>'s after a "net split".
+ .
+ To use this command, the user must be an IRC Operator.
References:
- RFC 2812, 3.7.1 "Kill message"
- KLINE
- KLINE <nick!user@hostmask> <seconds> :<reason>
+ KLINE <nick!user@hostmask> [<timeout> :<reason>]
+ .
+ This command provides timed K-Lines (server-local bans).
.
- This command provides timed K-Lines (Server-local bans).
- If a client matches a K-Line, it cannot connect to the issued server.
- If you put 0 as <seconds>, it makes the K-Line permanent.
+ If a client matches a K-Line, it cannot connect to this server for
+ <timeout> seconds. When <timeout> is 0, it makes the K-Line permanent.
.
- To remove a K-Line, type "KLINE <nick!user@hostmask>".
- To list the K-Lines, type "STATS k".
+ If no <timeout> and no <reason> is given, the K-Line is removed.
+ .
+ To use this command, the user must be an IRC Operator.
+ .
+ "STATS k" can be used to list all currently active K-Lines.
+
+ References:
+ - This command is not specified in the IRC RFCs, it is an extension
+ of ngIRCd.
- OPER
- OPER <user> <password>
+ OPER <name> <password>
+ .
+ Authenticates a user named <name> as an IRC operator on the current
+ server/network.
+ .
+ This operator <name> must be configured in the server configuration.
.
- Authenticates <user> as an IRC operator on the current server/network.
+ Please note that <name> is NOT related to a nickname at all!
+
+ References:
+ - RFC 2812, 3.1.4 "Oper message"
- REHASH
REHASH
.
Causes the server to re-read and re-process its configuration file(s).
+ .
+ While rehashing, no new connections are accepted, but all already
+ established connections stay connected.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.2 "Rehash message"
- RESTART
RESTART
.
Restart the server.
+ .
+ While restarting, all connections are reset and no new connections
+ are accepted.
+ .
+ To use this command, the user must be an IRC Operator.
+
+ References:
+ - RFC 2812, 4.4 "Restart message"
- WALLOPS
WALLOPS <message>
.
Sends <message> to all users with user mode "+w".
+ .
+ To use this command, the user must be an IRC Operator.
+ References:
+ - RFC 2812, 4.7 "Operwall message"
IRC Service Commands
~~~~~~~~~~~~~~~~~~~~
.
CHANINFO is used by servers to inform each other about a channel:
its modes, channel key, user limits and its topic.
+ .
+ The CHANINFO command is allowed on server-links only.
References:
- IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
The METADATA command is used on server-links to update "metadata"
information of clients, like the hostname, the info text ("real name"),
or the user name.
+ .
+ The METADATA command is allowed on server-links only.
References:
- IRC+, <http://ngircd.barton.de/doc/Protocol.txt>
- IRC+, doc/Protocol.txt
- NJOIN
+ NJOIN <channel> [<mode>]<nick>[,[<mode>]<nick>[,...]]
+ .
+ The NJOIN command is used on server-links to add users with <nick>
+ and <mode> to a <channel> while peering.
+ .
+ The NJOIN command is allowed on server-links only.
+
+ References:
+ - RFC 2813, 4.2.2 "Njoin message"
- SERVER
+ SERVER <servername> <info>
+ SERVER <servername> <hopcount> <info>
+ SERVER <servername> <hopcount> <token> <info>
+ .
+ The first form registers the local connection as a new server in the
+ network, the second (RFC 1459) and third (RFC 2812) form announce a
+ new remote server in the network.
+ .
+ The SERVER command is allowed on unregistered or server-links only.
+
+ References:
+ - RFC 1459, 4.1.4 "Server message"
+ - RFC 2813, 4.1.2 "Server message"
- SQUIT
- SQUIT <server>
+ SQUIT <server> <comment>
.
Disconnects an IRC Server from the network.
+ .
+ This command is used on server-links, but can be used by IRC Operators
+ to forcefully disconnect servers from the network, too.
+ References:
+ - RFC 2812, 3.1.8 "Squit"
+ - RFC 2813, 4.1.6 "Server quit message"
Dummy Commands
~~~~~~~~~~~~~~
- RFC 2812, 4.6 "Users"
- GET
+ GET [...]
+ .
+ Fake HTTP GET command. When received, the connection is shut down
+ immediately again to protect against crazy web browsers ...
+
+ References:
+ - ngIRCd GIT commit 33e8c2480649
- POST
+ POST [...]
+ .
+ Fake HTTP POST command. When received, the connection is shut down
+ immediately again to protect against crazy web browsers ...
+
+ References:
+ - ngIRCd GIT commit 33e8c2480649