ngIRCd - Next Generation IRC Server
+ http://ngircd.barton.de/
+
+ (c)2001-2013 Alexander Barton and Contributors.
+ ngIRCd is free software and published under the
+ terms of the GNU General Public License.
+
+ -- INSTALL --
- (c)2001,2002 by Alexander Barton,
- alex@barton.de, http://www.barton.de/
- ngIRCd ist freie Software und steht unter
- der GNU General Public License.
+I. Upgrade Information
+~~~~~~~~~~~~~~~~~~~~~~
- -- INSTALL / Installation --
-
- Ilja Osthoff, <ilja@glide.ath.cx>
+Differences to version 19.x
+- Starting with ngIRCd 20, users can "cloak" their hostname only when the
+ configuration variable "CloakHostModeX" (introduced in 19.2) is set.
+ Otherwise, only IRC opertators, other servers, and services are allowed to
+ set mode +x. This prevents regular users from changing their hostmask to
+ the name of the IRC server itself, which confused quite a few people ;-)
+
+Differences to version 17
- +-----------------------------------------------------------------------+
- | Please note: English translations of some of the german documentation |
- | files can be found in the directory "doc/en" -- please have a look! |
- +-----------------------------------------------------------------------+
+- Support for ZeroConf/Bonjour/Rendezvous service registration has been
+ removed. The configuration option "NoZeroconf" is no longer available.
+- The structure of ngircd.conf has been cleaned up and three new configuration
+ sections have been introduced: [Limits], [Options], and [SSL].
+ Lots of configuration variables stored in the [Global] section are now
+ deprecated there and should be stored in one of these new sections (but
+ still work in [Global]):
+ "AllowRemoteOper" -> [Options]
+ "ChrootDir" -> [Options]
+ "ConnectIPv4" -> [Options]
+ "ConnectIPv6" -> [Options]
+ "ConnectRetry" -> [Limits]
+ "MaxConnections" -> [Limits]
+ "MaxConnectionsIP" -> [Limits]
+ "MaxJoins" -> [Limits]
+ "MaxNickLength" -> [Limits]
+ "NoDNS" -> [Options], and renamed to "DNS"
+ "NoIdent" -> [Options], and renamed to "Ident"
+ "NoPAM" -> [Options], and renamed to "PAM"
+ "OperCanUseMode" -> [Options]
+ "OperServerMode" -> [Options]
+ "PingTimeout" -> [Limits]
+ "PongTimeout" -> [Limits]
+ "PredefChannelsOnly" -> [Options]
+ "SSLCertFile" -> [SSL], and renamed to "CertFile"
+ "SSLDHFile" -> [SSL], and renamed to "DHFile"
+ "SSLKeyFile" -> [SSL], and renamed to "KeyFile"
+ "SSLKeyFilePassword" -> [SSL], and renamed to "KeyFilePassword"
+ "SSLPorts" -> [SSL], and renamed to "Ports"
+ "SyslogFacility" -> [Options]
+ "WebircPassword" -> [Options]
+ You should adjust your ngircd.conf and run "ngircd --configtest" to make
+ sure that your settings are correct and up to date!
-I. Standard-Installation
-~~~~~~~~~~~~~~~~~~~~~~~~
+Differences to version 16
+
+- Changes to the "MotdFile" specified in ngircd.conf now require a ngircd
+ configuration reload to take effect (HUP signal, REHASH command).
+
+Differences to version 0.9.x
+
+- The option of the configure script to enable support for Zeroconf/Bonjour/
+ Rendezvous/WhateverItIsNamedToday has been renamed:
+ --with-rendezvous -> --with-zeroconf
+
+Differences to version 0.8.x
+
+- The maximum length of passwords has been raised to 20 characters (instead
+ of 8 characters). If your passwords are longer than 8 characters then they
+ are cut at an other position now.
+
+Differences to version 0.6.x
+
+- Some options of the configure script have been renamed:
+ --disable-syslog -> --without-syslog
+ --disable-zlib -> --without-zlib
+ Please call "./configure --help" to review the full list of options!
+
+Differences to version 0.5.x
+
+- Starting with version 0.6.0, other servers are identified using asynchronous
+ passwords: therefore the variable "Password" in [Server]-sections has been
+ replaced by "MyPassword" and "PeerPassword".
+
+- New configuration variables, section [Global]: MaxConnections, MaxJoins
+ (see example configuration file "doc/sample-ngircd.conf"!).
+
+
+II. Standard Installation
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ngIRCd is developed for UNIX-based systems, which means that the installation
+on modern UNIX-like systems that are supported by GNU autoconf and GNU
+automake ("configure") should be no problem.
+
+The normal installation procedure after getting (and expanding) the source
+files (using a distribution archive or GIT) is as following:
+
+ 0) Satisfy prerequisites
+ 1) ./autogen.sh [only necessary when using GIT]
+ 2) ./configure
+ 3) make
+ 4) make install
+
+(Please see details below!)
+
+Now the newly compiled executable "ngircd" is installed in its standard
+location, /usr/local/sbin/.
+
+The next step is to configure and afterwards starting the daemon. Please
+have a look at the ngircd(8) and ngircd.conf(5) manual pages for details
+and all possible options -- and don't forget to run "ngircd --configtest"
+to validate your configuration file!
+
+If no previous version of the configuration file exists (the standard name
+is /usr/local/etc/ngircd.conf), a sample configuration file containing all
+possible options will be installed there. You'll find its template in the
+doc/ directory: sample-ngircd.conf.
+
+
+0): Satisfy prerequisites
+
+When building from source, you'll need some other software to build ngIRCd:
+for example a working C compiler, make tool, GNU automake and autoconf (only
+when not using a distribution archive), and a few libraries depending on the
+features you want to compile in (like IDENT support, SSL, and PAM).
+
+If you are using one of the "big" operating systems or Linux distributions,
+you can use the following commands to install all the required packages to
+build the sources including all optional features and to run the test suite:
-ngIRCd ist fuer UNIXoide-Systeme konzipiert worden, das bedeutet, dass die
-Installation auf einem modernen UNIX-aehnlichen System kein Problem dar-
-stellen sollte. Das System muss nur von GNU automake und GNU autoconf
-("configure") unterstuetzt werden.
+* RedHat / Fedora based distributions:
-Die Standard-Installation sieht so aus:
+ yum install \
+ autoconf automake expect gcc glibc-devel gnutls-devel \
+ libident-devel make pam-devel tcp_wrappers-devel telnet zlib-devel
- 1) tar xzf ngircd-<Version>.tar.gz
- 2) cd ngircd-<Version>
- 3) ./autogen.sh [nur erforderlich, wenn ueber CVS bezogen]
- 4) ./configure
- 5) make
- 6) make install
+* Debian / Ubuntu based distributions:
+ apt-get install \
+ autoconf automake build-essential expect libgnutls-dev \
+ libident-dev libpam-dev libwrap0-dev libz-dev telnet
-zu 3): "autogen.sh"
-Der erste Schritt, autogen.sh, ist nur notwendig, wenn das configure-Script
-noch nicht vorhanden ist. Dies ist nie bei offiziellen ("stabilen") Versionen
-in tar.gz-Archiven der Fall, jedoch nie, wenn der Source-Code ueber CVS
-bezogen wurde.
+1): "autogen.sh"
-Dieser Absatz ist also eigentlich ausschliesslich fuer Entwickler interessant.
+The first step, autogen.sh, is only necessary if the configure-script isn't
+already generated. This never happens in official ("stable") releases in
+tar.gz-archives, but when using GIT.
-autogen.sh erzeugt die fuer das configure-Script notwendigen Makefile.in's
-sowie das configure-Script selber und weitere fuer den make-Lauf erforderliche
-Dateien. Dazu wird sowohl GNU automake als auch GNU autoconf (in aktuellen
-Versionen!) benoetigt.
+This step is therefore only interesting for developers.
-(nochmal: "Endanwender" mussen diesen Schritt i.d.R. nicht ausfuehren!)
+autogen.sh produces the Makefile.in's, which are necessary for the configure
+script itself, and some more files for make. To run autogen.sh you'll need
+GNU autoconf and GNU automake: at least autoconf 2.61 and automake 1.10 are
+requird, newer is better. But don't use automake 1.12 or newer for creating
+distribution archives: it will work but lack "de-ANSI-fucation" support in the
+generated Makefile's! Stick with automake 1.11.x for this purpose ...
+So automake 1.11.x and autoconf 2.67+ is recommended.
+Again: "end users" do not need this step and neither need GNU autoconf nor GNU
+automake at all!
-zu 4): "./configure"
-Mit dem configure-Script wird ngIRCd, wie GNU Software meistens, an das
-lokale System angepasst und die erforderlichen Makefile's erzeugt.
+2): "./configure"
-Im Optimalfall sollte configure alle benoetigten Libraries, Header etc. selber
-erkennen und entsprechend reagieren. Sollte dies einmal nicht der Fall sein,
-so zeigt "./configure --help" moegliche Optionen.
+The configure-script is used to detect local system dependencies.
+In the perfect case, configure should recognize all needed libraries, header
+files and so on. If this shouldn't work, "./configure --help" shows all
+possible options.
-zu 5): "make"
+In addition, you can pass some command line options to "configure" to enable
+and/or disable some features of ngIRCd. All these options are shown using
+"./configure --help", too.
-Der make-Befehl bearbeitet die vom configure-Script erzeugten Makefile's und
-uebersetzt den ngIRCd.
+Compiling a static binary will avoid you the hassle of feeding a chroot dir
+(if you want use the chroot feature). Just do something like:
+ CFLAGS=-static ./configure [--your-options ...]
+Then you can use a void directory as ChrootDir (like OpenSSH's /var/empty).
-zu 6): "make install"
+3): "make"
-Mit "make install" wird der Server und ggf. eine Beispiels-Konfiguration
-im System installiert; hierzu sind in der Regel root-Rechte erforderlich.
-Eine bereits vorhandene Konfigurationsdatei wird nie ueberschrieben.
+The make command uses the Makefiles produced by configure and compiles the
+ngIRCd daemon.
-Folgende Dateien werden installiert:
-- /usr/local/sbin/ngircd: ausfuehrbarer Server
-- /usr/local/etc/ngircd.conf: Beispiel-Konfiguration, wenn nicht vorhanden
+4): "make install"
+Use "make install" to install the server and a sample configuration file on
+the local system. Normally, root privileges are necessary to complete this
+step. If there is already an older configuration file present, it won't be
+overwritten.
-II. Nuetzliche make-Targets
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+These files and folders will be installed by default:
-Die vom configure-Script erzeugten Makefile's enthalten immer die folgenden
-nuetzlichen Targets:
+- /usr/local/sbin/ngircd: executable server
+- /usr/local/etc/ngircd.conf: sample configuration (if not already present)
+- /usr/local/share/doc/ngircd/: documentation
+- /usr/local/share/man/: manual pages
- - clean: alle Erzeugnisse des Compilers/Linkers loeschen.
- Naechster Schritt: -> make
- - distclean: zusaetzliche alle Makefile's loeschen.
- Naechster Schritt: -> ./configure
+III. Additional features
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following optional features can be compiled into the daemon by passing
+options to the "configure" script. Most options can handle a <path> argument
+which will be used to search for the required libraries and header files in
+the given paths ("<path>/lib/...", "<path>/include/...") in addition to the
+standard locations.
+
+* Syslog Logging (autodetected by default):
+ --with-syslog[=<path>] / --without-syslog
+
+ Enable (disable) support for logging to "syslog", which should be
+ available on most modern UNIX-like operating systems by default.
+
+* ZLib Compression (autodetected by default):
+ --with-zlib[=<path>] / --without-zlib
+
+ Enable (disable) support for compressed server-server links.
+ The Z compression library ("libz") is required for this option.
+
+* IO Backend (autodetected by default):
+ --with-select[=<path>] / --without-select
+ --with-poll[=<path>] / --without-poll
+ --with-devpoll[=<path>] / --without-devpoll
+ --with-epoll[=<path>] / --without-epoll
+ --with-kqueue[=<path>] / --without-kqueue
+
+ ngIRCd can use different IO "backends": the "old school" select() and poll()
+ API which should be supported by most UNIX-like operating systems, or the
+ more efficient and flexible epoll() (Linux >=2.6), kqueue() (BSD) and
+ /dev/poll APIs.
+ By default the IO backend is autodetected, but you can use "--without-xxx"
+ to disable a more enhanced API.
+ When using the epoll() API, support for select() is compiled in as well by
+ default to enable the binary to run on older Linux kernels (<2.6), too.
+
+* IDENT-Support:
+ --with-ident[=<path>]
+
+ Include support for IDENT ("AUTH") lookups. The "ident" library is
+ required for this option.
+
+* TCP-Wrappers:
+ --with-tcp-wrappers[=<path>]
+
+ Include support for Wietse Venemas "TCP Wrappers" to limit client access
+ to the daemon, for example by using "/etc/hosts.{allow|deny}".
+ The "libwrap" is required for this option.
+
+* PAM:
+ --with-pam[=<path>]
- - maintainer-clean: alle automat. erzeugten Dateien loeschen.
- Naechster Schritt: -> ./autogen.sh
+ Enable support for PAM, the Pluggable Authentication Modules library.
+ See doc/PAM.txt for details.
+* SSL:
+ --with-openssl[=<path>]
+ --with-gnutls[=<path>]
+ Enable support for SSL/TLS using OpenSSL or gnutls libraries.
+ See doc/SSL.txt for details.
-III. Konfigurationsdatei ngircd.conf
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* IPv6:
+ --enable-ipv6
-In der Konfigurationsdatei werden Kommentare durch "#" oder durch ";"
-eingeleitet. Dieses dient nur der besseren Lesbarkeit.
+ Adds support for version 6 of the Internet Protocol.
-Die Datei ist in drei Abschnitte unterteilt: [Global], [Operator] und
-[Server]. Im [Global]-Teil werden die grundlegenden Einstellungen vor-
-genommen, z.B. der Server-Name und die Ports, auf denen er Verbindungen
-annehmen soll. In [Operator]-Abschnitten werden Server-Operatoren fest-
-gelegt und unter [Server] werden die Einstellungen fuer die Verbindung
-mit anderen Servern konfiguriert.
-Die Bedeutung der einzelnen Variablen ist in der Beispiel-Konfiguration
-"doc/sample-ngircd.conf" erklaert, die bei "make install" auch als
-"ngircd.conf" in /usr/local/etc installiert wird, wenn dort noch keine
-Konfigurationsdatei vorhanden ist.
+IV. Useful make-targets
+~~~~~~~~~~~~~~~~~~~~~~~
+The Makefile produced by the configure-script contains always these useful
+targets:
-IV. Kommandozeilen-Optionen
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ - clean: delete every product from the compiler/linker
+ next step: -> make
-Folgende Parameter koennen dem ngIRCd u.a. uebergeben werden:
+ - distclean: the above plus erase all generated Makefiles
+ next step: -> ./configure
+
+ - maintainer-clean: erase all automatic generated files
+ next step: -> ./autogen.sh
+
+
+V. Sample configuration file ngircd.conf
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In the sample configuration file, there are comments beginning with "#" OR
+";" -- this is only for the better understanding of the file.
+
+The file is separated in five blocks: [Global], [Features], [Operator],
+[Server], and [Channel].
+
+In the [Global] section, there is the main configuration like the server
+name and the ports, on which the server should be listening. Options in
+the [Features] section enable or disable functionality in the daemon.
+IRC operators of this server are defined in [Operator] blocks, remote
+servers are configured in [Server] sections, and [Channel] blocks are
+used to configure pre-defined ("persistent") IRC channels.
+
+The meaning of the variables in the configuration file is explained in the
+"doc/sample-ngircd.conf", which is used as sample configuration file in
+/usr/local/etc after running "make install" (if you don't already have one)
+and in the ngircd.conf(5) manual page.
+
+
+VI. Command line options
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+These parameters could be passed to the ngIRCd:
-f, --config <file>
- Der Daemon wird angewiesen, statt der Standard-Konfigurationsdatei
- /usr/local/etc/ngircd.conf die Datei <file> einzulesen.
+ The daemon uses the file <file> as configuration file rather than
+ the standard configuration /usr/local/etc/ngircd.conf.
-n, --nodaemon
- ngIRCd soll im Fordergrund laufen; alle Meldungen werden zusaetzlich
- zum Syslog auch auf der Konsole ausgegeben.
+ ngIRCd should be running as a foreground process.
-p, --passive
- Verbindungen zu anderen Servern (wie in der Konfigurationsdatei in
- [Server]-Abschnitten definiert) werden nicht automatisch hergestellt.
-
---configtest
- Die Konfigurationsdatei wird eingelesen, ueberprueft und so aus-
- gegeben, wie sie vom ngIRCd interpretiert wurde. Danach beendet
- sich der Server wieder.
+ Server-links won't be automatically established.
-Mit dem Parameter "--help" werden alle unterstuetzten Parameter angezeigt,
-mit "--version" die Versionsnummer. Bei beiden Parametern beendet sich der
-Server nach der Ausgabe wieder.
+-t, --configtest
+ Reads, validates and dumps the configuration file as interpreted
+ by the server. Then exits.
+Use "--help" to see a short help text describing all available parameters
+the server understands, with "--version" the ngIRCd shows its version
+number. In both cases the server exits after the output.
---
-$Id: INSTALL,v 1.7 2002/05/20 12:02:58 alex Exp $
+Please see the ngircd(8) manual page for complete details!