2 ngIRCd - Next Generation IRC Server
3 http://ngircd.barton.de/
5 (c)2001-2012 Alexander Barton and Contributors.
6 ngIRCd is free software and published under the
7 terms of the GNU General Public License.
13 - New numeric RPL_WHOISHOST_MSG(378), which returns the DNS hostname
14 (if available) and the IP address of a client in the WHOIS reply.
15 Only the user itself and local IRC operators get this numeric.
16 - Implement channel exception list (mode 'e'). This allows a channel
17 operator to define exception masks that allow users to join the
18 channel even when a "ban" would match and prevent them from joining:
19 the exception list (e) overrides the ban list (b).
20 - Implement user mode 'C': If the target user of a PRIVMSG or NOTICE
21 command has the user mode 'C' set, it is required that both sender
22 and receiver are on the same channel. This prevents private flooding
23 by completely unknown clients.
24 - New RPL_WHOISREGNICK_MSG(307) numeric in WHOIS command replies: it
25 indicates if a nick name is registered (if user mode 'R' set).
26 - Limit channel invite, ban, and exception lists to 50 entries and fix
27 duplicate check and error messages when adding already listed entries
28 or deleting no (longer) existing ones.
29 - Limit the number of list items in the reply of LIST (100), WHO (25),
30 WHOIS (10), and WHOWAS (25) commands.
31 - Limit the MODE command to handle a maximum number of 5 channel modes
32 that require an argument (+Ibkl) per call and report this number
33 in the ISUPPORT(005) numeric: "MODES=5".
34 - LINKS command: support <mask> parameter to limit the reply.
35 - Add 1 second penalty for every further target on PRIVMSG/NOTICE
36 commands: this reduces the possibility of flooding channels with
37 commands like "PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
38 Problem noticed by Cahata, thanks!
39 - New configuration option "PAMIsOptional": when set, clients not
40 sending a password are still allowed to connect: they won't become
41 "identified" and keep the "~" character prepended to their supplied
42 user name. See "man 5 ngircd.conf" for details.
43 - Fixed handling of WHO commands. This fixes two bugs: "WHO <nick>"
44 returned nothing at all if the user was "+i" (reported by Cahata,
45 thanks) and "WHO <nick|nickmask>" returned channel names instead
46 of "*" when the user was member of a (visible) channel.
47 - LUSERS reply: only count channels that are visible to the requesting
48 client, so the existence of secret channels is no longer revealed by
49 using LUSERS. Reported by Cahata, thanks!
50 - Unknown user and channel modes no longer stop the mode parser, but
51 are simply ignored. Therefore modes after the unknown one are now
52 handled. This is how ircd2.10/ircd2.11/ircd-seven behave, at least.
53 Reported by Cahata, thanks!
54 - Implement IRC commands "GLINE" and "KLINE" to ban users. G-Lines are
55 synchronized between server on peering, K-Lines are local only.
56 If you use "*!<user>@<host>" or "*!*@<host>" masks, these connections
57 are blocked even before the user is fully logged in (before PASS,
58 NICK, and USER commands have been processed) and before the child
59 processes for authentication are forked, so resource usage is smaller.
60 - Added doc/Modes.txt: document modes supported by ngIRCd.
61 - Implement user mode "R": indicates that the nick name of this user
62 is "registered". This mode isn't handled by ngIRCd itself, but must
63 be set and unset by IRC services like Anope.
64 - Implement channel mode "R": only registered users (having the user
65 mode "R" set) are allowed to join this channel.
66 - Test suite: bind to loopback (127.0.0.1) interface only.
67 - Handle unknown user and channel modes: these modes are saved and
68 forwarded to other servers, but ignored otherwise.
69 - Handle channel user modes 'a', 'h', and 'q' from remote servers.
70 These channel user modes aren't used for anything at the moment,
71 but ngIRCd knows that these three modes are "channel user modes"
72 and not "channel modes", that is that these modes take an "nick name"
73 argument. Like unknown user and channel modes, these modes are saved
74 and forwarded to other servers, but ignored otherwise.
76 ngIRCd Release 18 (2011-07-10)
78 - Add preliminary ngIRCd protocol module for Anope 1.9 to contrib/Anope/.
80 ngIRCd 18~rc2 (2011-06-29)
81 - GnuTLS: use 1024 bits as minimum size of the DH prime. This enables
82 ngIRCd to accept incoming connections from other servers and clients
83 that "only" use at least 1024 bits again, like ngIRCd 17 did (and no
84 longer requires 2048 bits for incoming connections).
86 ngIRCd 18~rc1 (2011-06-27)
87 - New configuration option "MorePrivacy" to "censor" some user information.
88 When enabled, signon time and idle time is left out. Part and quit
89 messages are made to look the same. WHOWAS requests are silently dropped.
90 All of this is useful if one wish to conceal users that access the ngircd
91 servers from TOR or I2P.
92 - New configuration option "ScrubCTCP" to scrub incoming CTCP commands. If
93 activated, the server silently drops incoming CTCP requests from both
94 other servers and from users. The server that scrubs CTCP will not forward
95 the CTCP requests to other servers in the network either, which can spell
96 trouble if not every oper knows about the CTCP-scrubbing. Scrubbing CTCP
97 commands also means that it is not possible to send files between users.
98 There is one exception to the CTCP scrubbing performed: ACTION ("/me
99 commands") requests are not scrubbed.
100 - Restructure ngIRCd configuration file: introduce new [Limits], [Options],
101 and [SSL] sections. The intention of this restructuring is to make the
102 [Global] section much cleaner, so that it only contains variables that
103 most installations must adjust to the local requirements. All the optional
104 variables are moved to [Limits], for configurable limits and timers of
105 ngIRCd, and [Options], for optional features. All SSL-related variables
106 are moved to [SSL] and the "SSL"-prefix is stripped. The old variables in
107 the [Global] section are deprecated now, but are still recognized.
108 => Don't forget to check your configuration, use "ngircd --configtest"!
109 - New documentation "how to contribute": doc/Contributing.txt.
110 - Avoid needlessly scary 'buffer overflow' messages: When the write buffer
111 space grows too large, ngIRCd has to disconnect the client to avoid
112 wasting too much memory, which is logged with a scary 'write buffer
113 overflow' message. Change this to a more descriptive wording.
114 - New configuration option "RequireAuthPing": PING-PONG on login. When
115 enabled, this configuration option lets ngIRCd send a PING with an numeric
116 "token" to clients logging in; and it will not become registered in the
117 network until the client responds with the correct PONG.
118 - New configuration option "NoticeAuth": send NOTICE AUTH on connect. When
119 active, ngircd will send "NOTICE AUTH" messages on client connect time
120 like e.g. snircd (QuakeNet) does.
121 - Add support for up to 3 targets in WHOIS queries, also allow up to one
122 wildcard query from local hosts. Follows ircd 2.10 implementation rather
123 than RFC 2812. At most 10 entries are returned per wildcard expansion.
124 - ngircd.conf(5) manual page: describe types of configuration variables
125 (booleans, text strings, integer numbers) and add type information to each
126 variable description.
127 - Terminate incoming connections on HTTP commands "GET" and "POST".
128 - New configuration option "CloakHost": when set, this hostname is used for
129 every client instead of the real DNS hostname (or IP address).
130 - New configuration option "CloakUserToNick": when enabled, ngIRCd sets
131 every clients' user name to their nick name and hides the user name
132 supplied by the IRC client.
133 - Make write buffers bigger, but flush early. Before this change, a client
134 got disconnected if the buffer flushing at 4k failed, now regular clients
135 can store up to 32k and servers up 64k even if flushing is not possible at
136 the moment. This enhances reliability on slow links.
137 - Allow "Port = 0" in [Server] blocks. Port number 0 marks remote servers
138 that try to connect to this daemon, but where this daemon never tries to
139 establish a connection on its own: only incoming connections are allowed.
140 - Enable WHOIS command to return information about services.
141 - Implement channel mode 'O': "IRC operators only". This channel mode is
142 used on DALnet (bahamut), for example.
143 - Remove support for ZeroConf/Bonjour/Rendezvous service registration
144 including the "[No]ZeroConf" configuration option.
145 - Deprecate NoXX-Options in ngircd.conf and move new variants into our new
146 [Options] section: 'NoDNS=no' => 'DNS=yes', 'NoIdent=no' => 'Ident=yes',
147 'NoPAM=no' => 'PAM=yes', and 'NoZeroConf=no' => 'ZeroConf=yes' (and
148 vice-versa). The defaults are adjusted accordingly and the old variables
149 in [Global] are still accepted, so there is no functional change.
151 ngIRCd Release 17.1 (2010-12-19)
153 - Don't log critical (or worse) messages to stderr
154 - Remove "error file" when compiled with debug code enabled
155 - New numeric 329: get channel creation time on "MODE #chan" commands
157 ngIRCd Release 17 (2010-11-07)
159 - doc: change path names in sample-ngircd.conf depending on sysconfdir
161 ngIRCd 17~rc2 (2010-10-25)
162 - Generate ngIRCd version number from GIT tag.
163 - Make sourcecode compatible with ansi2knr again. This allows to compile
164 ngIRCd using a pre-ANSI K&R C compiler again.
166 ngIRCd 17~rc1 (2010-10-11)
167 - New configuration option "NoZeroConf" to disable service registration at
168 runtime even if ngIRCd is compiled with support for ZeroConf (e.g. using
169 Howl, Avahi or on Mac OS X).
170 - New configuration option "SyslogFacility" to define the syslog "facility"
171 (the "target"), to which ngIRCd should send its log messages.
172 Possible values are system dependant, but most probably "auth", "daemon",
173 "user" and "local1" through "local7" are possible values; see syslog(3).
174 Default is "local5" for historical reasons.
175 - Dump the "internal server state" (configured servers, established
176 connections and known clients) to the console or syslog when receiving
177 the SIGUSR2 signal and debug mode is enabled.
178 - Enable the daemon to disable and enable "debug mode" on runtime using
179 signal SIGUSR1, when debug code is compiled in, not only on startup
180 using the command line parameters.
181 - Implement user mode "x": hostname cloaking (closes: #102).
182 - Change MOTD file handling: ngIRCd now caches the contens of the MOTD
183 file, so the daemon now requires a HUP signal or REHASH command to
184 re-read the MOTD file when its content changed.
185 - Allow IRC ops to change channel modes even without OperServerMode set.
186 - Allow IRC operators to use MODE command on any channel (closes: #100).
187 - New configuration option "NoPAM" to disable PAM.
188 - Implement asynchronous user authentication using PAM, please see the
189 file doc/PAM.txt for details.
190 - Add some documentation for using BOPM with ngIRCd, see doc/Bopm.txt.
191 - Implement user mode "c": receive connect/disconnect NOTICEs. Note that
192 this new mode requires the user to be an IRC operator.
193 - Show SSL status in WHOIS output, numeric 275.
195 ngIRCd Release 16 (2010-05-02)
197 ngIRCd 16~rc2 (2010-04-25)
198 - Enhace connection statistics counters: display total number of served
199 connections on daemon shutdown and when a new client connects using
200 the new numeric RPL_STATSCONN (250).
202 ngIRCd 16~rc1 (2010-03-25)
203 - Implement WEBIRC command used by some Web-IRC frontends. The password
204 required to secure this command must be configured using the new
205 "WebircPassword" variable in the ngircd.conf file.
206 - Remove limit on max number of configured irc operators.
207 - A new channel mode "secure connections only" (+z) has been implemented:
208 Only clients using a SSL encrypted connection to the server are allowed
209 to join such a channel.
210 But please note three things: a) already joined clients are not checked
211 when setting this mode, b) IRC operators are always allowed to join
212 every channel, and c) remote clients using a server not supporting this
213 mode are not checked either and therefore always allowed to join.
215 ngIRCd Release 15 (2009-11-07)
217 ngIRCd 15~rc1 (2009-10-15)
218 - Do not add default listening port (6667) if SSL ports were specified, so
219 ngIRCd can be configured to only accept SSL-encrypted connections now.
220 - Enable IRC operators to use the IRC command SQUIT (insted of the already
221 implemented but non-standard DISCONNECT command).
222 - New configuration option "AllowRemoteOper" (disabled by default) that
223 enables remote IRC operators to use the IRC commands SQUIT and CONNECT
225 - Enforce upper limit on maximum number of handled commands. This implements
226 a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
227 per second before a one second pause is enforced.
229 ngIRCd Release 14.1 (2009-05-05)
231 - Security: fix remotely triggerable crash in SSL/TLS code.
232 - Debian: build ngircd-full-dbg package.
233 - Allow ping timeout quit messages to show the timeout value.
235 ngIRCd Release 14 (2009-04-20)
237 ngIRCd 14~rc1 (2009-03-29)
238 - Allow creation of persistent modeless channels.
239 - The INFO command reports the compile time now (if available).
240 - Support individual channel keys for pre-defined channels: introduce
241 new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
242 here a file can be configured for each pre-defined channel which contains
243 individual channel keys for different users.
244 - Remove limit on maximum number of predefined channels in ngircd.conf.
246 ngIRCd Release 13 (2008-12-25)
248 ngIRCd 13~rc1 (2008-11-21):
249 - New version number scheme :-)
250 - Initial support for IRC services, using a RFC1459 style interface,
251 tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
252 For this to work, ngIRCd now supports server-server links conforming
253 to RFC 1459. New ngircd.conf(5) option: ServiceMask.
254 - Support for SSL-encrypted server-server and client-server links using
255 OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
256 New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
257 SSLCertFile, SSLDHFile, and SSLConnect.
258 - Server local channels have been implemented, prefix "&", that are only
259 visible to users of the same server and are not visible in the network.
260 In addition ngIRCd creates a "special" channel &SERVER on startup and logs
261 all the messages to it that a user with mode +s receives.
262 - New make target "osxpkg" to build a Mac OS X installer package.
263 - New configuration option "NoIdent" to disable IDENT lookups even if the
264 daemon is compiled with IDENT support.
266 ngIRCd 0.12.1 (2008-07-09)
268 - Add option aliases -V (for --version) and -h (for --help).
269 - Make Listen parameter a comma-separated list of addresses. This also
270 obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
271 is treated as Listen="::,0.0.0.0".
272 Note: ListenIPv4 and ListenIPv6 options are still recognized,
273 but ngircd will print a warning if they are used in the config file.
275 ngIRCd 0.12.0 (2008-05-13)
277 ngIRCd 0.12.0-pre2 (2008-04-29)
278 - IPv6: Add config options to disable ipv4/ipv6 support.
280 ngIRCd 0.12.0-pre1 (2008-04-20)
282 - Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
283 - Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
284 enhanced test suite to check these commands. (Dana Dahlstrom)
285 - IRC_WHO now supports search patterns and will test this against user
286 nickname/servername/hostname, etc. as required by RFC 2812, Section 3.6.1.
287 (reported by Dana Dahlstrom)
288 - Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
289 as if the user had sent PART commands for all channels the user is a
290 member of. (Dana Dahlstrom)
291 - Allow NOTICEs to be sent to a channel. (Fabian Schlager)
293 ngIRCd 0.11.0 (2008-01-15)
295 - Add support for /STAT u (server uptime) command.
296 - New [Server] configuration Option "Bind" allows to specify
297 the source IP address to use when connecting to remote server.
298 - New configuration option "MaxNickLength" to specify the allowed maximum
299 length of user nick names. Note: must be unique in an IRC network!
300 - Numeric 317: implemented "signon time" (displayed in WHOIS result).
301 - Added new server configuration option "Passive" for "Server" blocks to
302 disable automatic outgoing connections (similar to -p option to ngircd,
303 but only for the specified server). (Tassilo Schweyer)
304 - Added support for the WALLOPS command. Usage is restricted to IRC
307 ngIRCd 0.10.2 (2007-06-08)
309 - Predefined channel configuration now allows specification of channel key
310 (mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
311 - When using the epoll() IO interface, compile in the select() interface as
312 well and fall back to it when epoll() isn't available on runtime.
313 - Added support for IO APIs "poll()" and "/dev/poll".
315 ngIRCd 0.10.1 (2006-12-17)
317 - Allow PASS syntax defined in RFC 1459 for server links, too.
318 - New configuration option "PredefChannelsOnly": if set, clients can only
319 join predefined channels.
321 ngIRCd 0.10.0 (2006-10-01)
323 ngIRCd 0.10.0-pre1 (2006-08-02)
324 - Enhanced DIE to accept a single parameter ("comment text") which is sent
325 to all locally connected clients before the server goes down.
326 - JOIN now supports more than one channel key at a time.
327 - Implemented numeric "333": Time and user name who set a channel topic.
328 - Channel topics are no longer limited to 127 characters: now the only limit
329 is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
330 limits the topic to about 490 characters due to protocol overhead).
331 - Reverse DNS lookup code now checks the result by doing an additional
332 lookup to prevent spoofing.
333 - Added new IO layer which (optionally) supports epoll() and kqueue() in
334 addition to the select() interface.
336 ngIRCd 0.9.0 (2005-07-24)
338 - Never run with root privileges but always switch the user ID.
339 - Make "netsplit" messages RFC compliant.
340 - Implemented the IRC function "WHOWAS".
341 - New configuration option "OperServerMode" to enable a workaround needed
342 when running an network with ircd2 servers and "OperCanUseMode" enabled
343 to prevent the ircd2 daemon to drop mode changes of IRC operators.
344 Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
345 - Implemented support for "secret channels" (channel mode "s").
346 - New configuration option "Mask" for [Operator] sections to limit OPER
347 commands to users with a specific IRC mask. Patch from Florian Westphal.
348 - New configuration variable "PidFile", section "[Global]": if defined,
349 the server writes its process ID (PID) to this file. Default: off.
350 Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
351 - Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
352 Rendezvous API, in addition to the API of Apple (Mac OS X). The available
353 API will be autodetected when you call "./configure --with-rendezvous".
355 ngIRCd 0.8.0 (2004-06-26)
357 - Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
358 Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
359 its root and working directory to something "safe". MotdPhrase is used
360 to define an "MOTD string" instead of a whole file, useful if the
361 "real" MOTD file would be outside the "jail".
362 - INVITE- and BAN-lists become synchronized between IRC+ servers when
363 establishing new connections, if the peer supports this as well.
364 - The type of service (TOS) of all sockets is set to "interactive" now.
365 - Added short command line option "-t" as alternative to "--configtest".
366 - Added optional support for "IDENT" lookups on incoming connections. You
367 have to enable this function with the ./configure switch "--with-ident".
368 The default is not to do IDENT lookups.
370 ngIRCd 0.7.5 (2003-07-11)
372 - New configuration variable "MaxConnectionsIP" to limit the number of
373 simultaneous connections from a single IP that the server will accept.
374 This configuration options lowers the risk of denial of service attacks
375 (DoS), the default is 5 connections per client IP.
376 - Added new configuration variable "Listen" to bind all listening
377 sockets of the server to a single IP address.
379 ngIRCd 0.7.1 (2003-07-18)
381 - Added support for GNU/Hurd.
383 ngIRCd 0.7.0 (2003-05-01)
385 - New command CONNECT to enable and add server links. The syntax is not
386 RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
387 configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
388 to add a new server (ngIRCd tries to connect new servers only once!).
389 - Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
390 - New command TRACE (you can trace only servers at the moment).
391 - New command HELP that lists all understood commands.
392 - ngIRCd can register itself with Rendezvous: to enable support pass the
393 new switch "--with-rendezvous" to configure.
394 - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
395 configure to enable it.
396 - Changed some configure options to use "--with"/"--without" as prefix
397 instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
398 "--with-tcp-wrappers", and "--with-rendezvous".
399 - Enhanced manual pages ngircd(8) and ngircd.conf(5).
400 - Documentation is now installed in $(datadir)/doc/ngircd.
403 Older news (sorry, only available in german language):
405 ngIRCd 0.6.0, 2002-12-24
407 - beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
408 noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
409 - Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
410 bei Bedarf bis zu einem konfigurierten Limit vergroessert.
411 - Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
412 kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
413 Der Default ist -1, "unlimitiert".
414 - der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
415 Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
416 ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
417 Servern in der Konfiguration ein Port fuer den Connect konfiguriert
418 werden (beide Server versuchen sich dann gegenseitig zu connectieren).
419 - Server identifizieren sich nun mit asynchronen Passwoertern, d.h. das
420 Passwort, welches A an B schickt, kann ein anderes sein als das, welches
421 B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
422 wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
423 - Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
424 macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
425 - Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
426 (www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
427 nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
428 kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
429 miteinander ueber komprimiert Links kommunizieren.
430 - neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
431 der Channels, in denen ein User Mitglied sein kann, begrent werden.
432 - neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
434 ngIRCd 0.5.0, 20.09.2002
436 - AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
437 (2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
438 - Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
439 dem "nativen" (ggf. pre-ANSI) Compiler.
440 - "persistente Channels" (Mode 'P') implementiert: diese koennen in der
441 Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
442 Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
443 wenn kein User mehr im Channel ist.
444 - neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
445 Mit dem neuen Befehl CHANINFO synchronisieren Server, die das IRC+-
446 Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
447 gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
448 "AdminInfo2" und "AdminEMail".
449 - Invite- und Ban-Lists implementiert.
450 - neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
451 ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
452 - "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
454 ngIRCd 0.4.2, 29.04.2002
456 - IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
457 Regular Expressions (bis auf "*") unterstuetzt.
459 ngIRCd 0.4.0, 01.04.2002
461 - WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
462 - stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
463 Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
464 ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
465 zusaetzliche Informationen.
466 - Server-Gruppen implementiert: es wird immer nur zu einem Server in
467 einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
468 nicht, so wird der naechste probiert.
469 - Clients und Channels werden nicht mehr ueber ihren Namen, sondern
470 einen Hash-Wert gesucht: sollte deutlich schneller sein.
471 - neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
472 gelesen und die dann verwendeten Werte angezeigt.
473 - Client-Mode "s" (Server Notices) implementiert.
474 - mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
475 alternative Konfigurationsdatei angegeben werden.
476 - nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
477 zu einer anderen User-ID und Group-ID wechseln.
479 ngIRCd 0.3.0, 02.03.2002
481 - bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
482 er auf den IRC-Befehl RESTART reagiert.
483 - neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
484 verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
485 Zum Debuggen manchmal ganz praktisch :-)
486 - neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
487 - Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
488 - AWAY (und der User-Mode 'a') ist nun implementiert.
489 - der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
490 - Channel- und Nicknames werden nun ordentlich validiert.
492 ngIRCd 0.2.0, 15.02.2002
494 - Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
495 Server versteht an User-Modes o und v, beachtet letzteres allerdings
496 noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
497 bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
498 nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
499 - Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
501 ngIRCd 0.1.0, 29.01.2002
503 - Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
504 es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
505 Chatten in Channels ist aber natuerlich moeglich ;-)
506 Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
507 - neue Befehle fuer Channles: JOIN, PART und NJOIN.
508 - FAQ.txt in doc/ begonnen.
510 ngIRCd 0.0.3, 16.01.2002
512 - Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
513 "Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
514 IRC-Netzwerk arbeiten.
515 - WHOIS wird nun immer an den "Original-Server" weitergeleitet.
516 - Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
517 - Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
518 - ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
519 - neue Befehle: LUSERS, LINKS.
521 ngIRCd 0.0.2, 06.01.2002
523 - neuer Aufbau der Konfigurationsdatei,
524 - mehrere IRC-Operatoren koennen konfiguriert werden,
525 - Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
526 nur "leafed server" sein, d.h. keine "Client-Server" haben.
528 ngIRCd 0.0.1, 31.12.2001
530 - erste oeffentliche Version von ngIRCd als "public preview" :-)